Installation Manual

CP-900 Rack Mount
ASSEMBLY INSTRUCTIONS
2
3
4
Questions? Call Pioneer service and support at 1-800-421-1404
www.PioneerDJusa.com
DJM-900nexus and DJM-900SRT: side view
x 6
1
Use the (6) screws, (6) spring washers,
and (6) plain washers provided.
Remove the three screws on the top left, top
right and bottom middle side of the mixer.
Align the rack mount plate to the holes, and screw the
rack mount plate to the mixer with the provided screws
and washers in the designated three holes. Repeat for
the other side of the mixer.
(NOTE: Force may be needed to get
the screw started. This will not damage your mixer.)
Attach top of the rack ear to rack mount case using
the screws provided with the rack case.
FOR RACKMOUNTING THE DJM-900nexus and DJM-900SRT: