Instruction Manual

Searching the PTY
1 Press OPEN to open the front panel.
2 Press FUNCTION to select program type
selection (PTY).
3 Press a or b to select a program type.
4 Press d to begin the search.
Note
The PTY method displayed is narrow. The wide
method cannot be selected when using DAB as
source.
Using dynamic label
Dynamic label provides character information
concerning the service component youre cur-
rently listening to. You can scroll the displayed
information.
Notes
! The tuner automatically memorizes the three
latest dynamic labels received, replacing text
from the least recent reception with new text
when it is received.
! You can store data from up to six dynamic
label transmissions in buttons 16.
Displaying dynamic label
1 Press OPEN to open the front panel.
2 Press TEXT to display dynamic label.
Dynamic label for the currently broadcasting
station is displayed.
# You can cancel dynamic label display by
pressing TEXT or BAND.
# When no dynamic label is currently being re-
ceived, No text is displayed.
# If you press TEXT while front panel of the
head unit has been closed, the front panel auto-
matically opens.
3 Press c or d to recall the three most re-
cent dynamic labels.
Pressing c or d switches between the current
and the three dynamic label data displays.
# If there is no dynamic label data in memory
the display will not change.
4 Press b to scroll the dynamic label.
# When viewing dynamic label, do not operate
until you have parked your car safely.
# If you press a, you return to the first line.
# If you select the dynamic label mode again
after having canceled it, the information may
switch to the latest available.
Storing and recalling dynamic label
You can store data from up to six dynamic
label transmissions at buttons 16.
1 Display the dynamic label you want to
store in memory.
Refer to Displaying dynamic label on this page.
2 Press any buttons 16 and hold to store
the selected dynamic label.
The memory number will display and the se-
lected dynamic label will be stored in memory.
The next time you press the same button in
the dynamic label display the stored text is re-
called from memory.
Introduction of DVD operation
You can use this unit with a separately sold
DVD player or multi-DVD player.
For details concerning operation, refer to the
DVD players or multi-DVD players operation
manual. This section provides information on
Other Functions
En
68
Section
11