DVR-433H_UK.
DVR-433H_UK.book 2 ページ 2005年3月1日 火曜日 午後5時6分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
DVR-433H_UK.book 3 ページ 2005年3月1日 火曜日 午後5時6分 WARNING To prevent a fire hazard, do not place any naked flame sources (such as a lighted candle) on the D3-4-2-1-7a_A_En equipment.
DVR-433H_UK.book 4 ページ 2005年3月1日 火曜日 午後5時6分 Contents 01 Before you start Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 What’s in the box . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Putting the batteries in the remote control . . . . . . . . . 8 Using the remote control . . . . . . . . . . . . . . . . . . . . . . 8 Disc / content format playback compatibility . . . . . . . 9 About the internal hard disk drive . . . . . . . . . . . . . . .
DVR-433H_UK.book 5 ページ 2005年3月1日 火曜日 午後5時6分 11 The Disc Setup menu Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Initialize settings . . . . . . . . . . . . . . . . . . . . . . . . . . . Finalize settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . Optimize HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Initialize HDD . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVR-433H_UK.book 6 ページ 2005年3月1日 火曜日 午後5時6分 Before you start 01 Chapter 1 Before you start Features • On-screen Help Use the HELP button on the remote control to display a help screen for the current operation. HDD • HDD recording Record up to 227 hours of video (in MN1 mode) on the internal 80 GB (gigabyte) hard disk (HDD).
DVR-433H_UK.book 7 ページ 2005年3月1日 火曜日 午後5時6分 Before you start • Optimized recording Optimized recording adjusts the recording quality automatically if a timer recording will not fit onto a disc with the settings that you made. • Auto Start Recording from satellite receiver or other set top box With a satellite receiver or other set top box connected to the AV2/AUTO START REC inputs of this recorder, you can start and stop recording automatically according to the timer settings of the set top box.
DVR-433H_UK.book 8 ページ 2005年3月1日 火曜日 午後5時6分 Before you start 01 What’s in the box Please confirm that the following accessories are in the box when you open it. • Remote control • AA/R6P dry cell batteries x2 • Audio/video cable (red/white/yellow) • RF antenna cable • Power cable • These operating instructions • Warranty card Putting the batteries in the remote control 1 Open the battery compartment cover on the back of the remote control.
DVR-433H_UK.book 9 ページ 2005年3月1日 火曜日 午後5時6分 Before you start 01 Disc / content format playback compatibility Note that older models of DVD recorders and DVD writers may reject DVD-RW Ver. 1.2 discs and/or corrupt the data on the disc. If you want to share DVD-RW discs between this recorder and an older recorder/writer, we recommend using Ver. 1.1 discs. General disc compatibility The following table shows older Pioneer DVD recorders’ limited compatibility with DVD-RW Ver. 1.2 discs.
DVR-433H_UK.book 10 ページ 2005年3月1日 01 火曜日 午後5時6分 Before you start WMA (Windows Media Audio) compatibility Frequently asked questions • What’s the difference between DVD-R and DVD-RW? The Windows Media® logo printed on the box indicates that this recorder can playback Windows Media Audio content. WMA is an acronym for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation.
DVR-433H_UK.book 11 ページ 2005年3月1日 火曜日 午後5時6分 Before you start 01 * ‘DVD-Video format’ recording: The use of the DVDVideo format for recording on DVD-R and DVD-RW discs is referred to as recording in ‘Video mode’ on Pioneer’s DVD recorders. Supporting playback of DVD-R / DVDRW discs is optional for manufacturers of DVD playback equipment, and there is DVD playback equipment that does not play DVD-R or DVD-RW discs recorded in the DVD-Video format. Note: ‘Finalization’ is required.
DVR-433H_UK.book 12 ページ 2005年3月1日 火曜日 午後5時6分 Connecting up 02 Chapter 2 Connecting up Rear panel connections 1 2 3 AV 2/AUTO START REC (INPUT 1/DECODER) R L AV 1 (RGB) – TV L 4 COMPONENT VIDEO OUT PB Y AC IN CONTROL DIGITAL OUT R IN ANTENNA OUT OPTICAL IN 5 6 7 1 AV2/AUTO START REC(INPUT 1/DECODER) AV connector Audio/video input/output SCART-type AV connector for connecting to a VCR, or other equipment with a SCART connector. The input accepts video, S-video and RGB.
DVR-433H_UK.book 13 ページ 2005年3月1日 火曜日 午後5時6分 Connecting up 02 Extra features for use with compatible TVs When this recorder is connected to a TV that features i/o Link.
DVR-433H_UK.book 14 ページ 2005年3月1日 02 火曜日 午後5時6分 Connecting up Easy connections The setup described below is a basic setup that allows you to watch and record TV programs, and play discs. Other types of connections are explained starting on the following page. Important • These connections use SCART cables (not supplied). If your TV (or VCR) does not have a SCART connection, see the following page for connecting up using the supplied audio/video cable.
DVR-433H_UK.book 15 ページ 2005年3月1日 火曜日 午後5時6分 Connecting up 02 Using other types of audio/video output If you can’t use the SCART AV connector to connect your TV to this recorder, there are standard audio/video output jacks, as well as an S-video and component video output.
DVR-433H_UK.book 16 ページ 2005年3月1日 02 火曜日 午後5時6分 Connecting up Connecting to a cable box, satellite receiver or digital terrestrial receiver If you have a cable, satellite or digital terrestrial receiver with a built-in decoder, connect it to this recorder and your TV as shown on this page.1 If you are using a separate decoder box for your cable/satellite TV, set up following the instructions on the next page.
DVR-433H_UK.book 17 ページ 2005年3月1日 火曜日 午後5時6分 Connecting up 02 Connecting an external decoder box (1) If you have an external, dedicated decoder box for your satellite or cable TV system, use the setup described on this page. Important • Do not connect your decoder box directly to this recorder. • Information from the decoder (for example, relating to pay TV services), is only viewable when this recorder is off (in standby).
DVR-433H_UK.book 18 ページ 2005年3月1日 02 火曜日 午後5時6分 Connecting up Connecting an external decoder box (2) If you only have a decoder, connect it to this recorder and your TV as shown on this page. 1 Using the setup on this page you can: • Record scrambled channels received using the recorder’s built-in TV tuner. Important • Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component directly to your TV or AV amplifier/receiver.
DVR-433H_UK.book 19 ページ 2005年3月1日 火曜日 午後5時6分 Connecting up 02 Connecting to an AV amplifier/receiver To enjoy multichannel surround sound you need to connect this recorder to an AV amplifier/receiver using the digital optical output. In addition to a digital connection, we recommend also connecting using the stereo analog connection for compatibility with all discs and sources. You’ll probably also want to connect a video output to your AV amplifier/receiver.
DVR-433H_UK.book 20 ページ 2005年3月1日 02 火曜日 午後5時6分 Connecting up Connecting a DV camcorder Connecting other AV sources Using the front panel DV IN jack, it is possible to connect a DV camcorder or video deck, or DVD-R/RW recorder and digitally transfer DV tapes or DVD-R/RW discs to DVD-R/RW.
DVR-433H_UK.book 21 ページ 2005年3月1日 火曜日 午後5時6分 Controls and displays 03 Chapter 3 Controls and displays Front panel 1 2 3 4 5 6 OPEN/CLOSE 18 17 16 HOME MENU ENTER 15 14 1 STANDBY/ON Press to switch the recorder on/into standby. 2 Disc tray 3 DISC NAVIGATOR/TOP MENU Press to display the Disc Navigator screen, or the top menu if a DVD-Video disc is loaded. 4 OPEN/CLOSE Press to open/close the disc tray.
DVR-433H_UK.book 22 ページ 2005年3月1日 火曜日 午後5時6分 Controls and displays 03 5 2 Number buttons Use the number buttons for track/chapter/title selection; channel selection, and so on. The same buttons can also be used to enter names for titles, discs and so on. 4 6 AUDIO (SHIFT + 1) (page 29, 61) Changes the audio language or channel. (When the recorder is stopped, press to change the tuner audio.
DVR-433H_UK.book 23 ページ 2005年3月1日 火曜日 午後5時6分 Controls and displays 03 REC MODE (SHIFT + ) (page 39) Press repeatedly to change the recording mode (picture quality). / Press to skip to the previous or next title/chapter/ track/folder; or to display the previous or next menu page. CM BACK (SHIFT + ) (commercial back) Press repeatedly to skip progressively backward through the audio or video playing.
DVR-433H_UK.book 24 ページ 2005年3月1日 火曜日 午後5時6分 Controls and displays 03 Display 1 2 3 4 L R 9 8 7 6 Character display 2 Lights when copying. 7 R / RW Indicates the type of recordable DVD loaded: DVD-R or DVD-RW. 3 Lights during recording; blinks when recording is paused. 8 AUTO Lights when Auto Start Recording has been set, and during Auto Start Recording. 4 9 (page 41) Lights when a timer recording has been set.
DVR-433H_UK.book 25 ページ 2005年3月1日 火曜日 午後5時6分 Getting started 04 Chapter 4 Getting started Switching on and setting up When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output settings. If you’re using the recorder for the first time, we strongly recommend you use the Setup Navigator before starting to use the recorder.
DVR-433H_UK.book 26 ページ 2005年3月1日 火曜日 午後5時6分 Getting started 04 • Use the / buttons to choose your country, then press ENTER. The recorder takes a short while to set the time. After you see that the time has been set, select Next to proceed.
DVR-433H_UK.book 27 ページ 2005年3月1日 火曜日 午後5時6分 Getting started 04 Use the / buttons to move from one field to another. • You can go back to the previous screen at anytime in the Setup Navigator by pressing RETURN. 7 Select the TV screen type, ‘Wide (16:9)’ or ‘Standard (4:3)’.
DVR-433H_UK.book 28 ページ 2005年3月1日 04 火曜日 午後5時6分 Getting started Making your first recording This quick guide shows you how to make a basic recording of a TV program on either the HDD, or to a recordable DVD. 4 Load a blank DVD-R or DVD-RW disc with the label side face-up, using the disc guide to align the disc. • When you load a new, blank DVD-RW disc, the recorder will take a moment to initialize it for recording. Recording is covered in much more detail in chapter 5 (Recording).
DVR-433H_UK.book 29 ページ 2005年3月1日 火曜日 午後5時6分 Getting started 04 Using the built-in TV tuner • If the NICAM audio setting (see Nicam Select on page 94) is set to NICAM and you are watching a NICAM broadcast, you can switch between NICAM and Regular (non-NICAM) audio. Changing TV channels NICAM There are three different ways to select TV channels. Note that you can’t change the TV channel during playback, recording or during recording standby.
DVR-433H_UK.book 30 ページ 2005年3月1日 04 火曜日 午後5時6分 Getting started Switching between TV and DVD When the recorder is stopped or recording you can choose whether to have the audio/video from the built-in TV tuner (or external input) play on your TV (‘DVD mode’), or watch the channel that the TV is currently set to (‘TV mode’). During playback or when a menu is being displayed onscreen, the sound and video is always routed to your TV and is unaffected by the TV/DVD (SHIFT + INPUT SELECT) mode setting.
DVR-433H_UK.book 31 ページ 2005年3月1日 火曜日 午後5時6分 Getting started 04 Basic playback This section shows you how to use your recorder for playback of discs (DVD, CD, etc.), and for playback of video from the HDD. More playback features, such as repeat and program play, are covered in Playback on page 53. STANDBY/ON DISPLAY HELP 1 Press STANDBY/ON to switch on. Also turn on your TV and make sure that it is set to the correct video input. 2 Press HDD/DVD to select either the HDD or the DVD for playback.
DVR-433H_UK.book 32 ページ 2005年3月1日 04 火曜日 午後5時6分 Getting started Playing DVD discs Playing from the HDD The table below shows the basic playback controls for DVD-Video, and recordable DVD discs. The table below shows the basic playback controls when playing video recorded on the hard disk (HDD). Press to start playback. If RESUME is displayed on-screen, playback starts from the place last stopped. Press to start playback.
DVR-433H_UK.book 33 ページ 2005年3月1日 火曜日 午後5時6分 Getting started 04 Playing CDs and WMA/MP3 discs Playing Video CD/Super VCDs The table below shows the basic playback controls for audio CDs1, and WMA/MP3 files. The table below shows the basic playback controls for Video CD/Super VCDs. Press to start playback. Press to stop playback. Some discs feature Playback Control (PBC for short) menus.
DVR-433H_UK.book 34 ページ 2005年3月1日 04 火曜日 午後5時6分 Getting started Using the Home Menu From the Home Menu screen you can access all the features of the recorder. Note that some options in the Home Menu may be grayed out sometimes, indicating that they are not available at the present time. For example, the Photoviewer option is grayed out unless there is a disc loaded that contains JPEG image files.
DVR-433H_UK.book 35 ページ 2005年3月1日 火曜日 午後5時6分 Getting started 04 HDD and removable disc activity display Press DISPLAY (SHIFT + HELP) once to see the HDD and removable disc (DVD, etc.) activity. Use the HDD/DVD button to switch between the two kinds of display. The example displays below show high-speed copying from HDD to DVD, and HDD chase playback. HDD DVD-RW Video Hi-Speed Copy Remain –h––m Stop 8 Copy control information Shows recording restrictions of the current channel program.
DVR-433H_UK.book 36 ページ 2005年3月1日 火曜日 午後5時6分 Getting started 04 Play display 1 Recording display 1 Play DVD-R Video 2 3 4 1 5 Rec DVD-R Video 3–2 0. 00. 15 Chapters 15 Title Total 0. 11. 52 2 3 0. 00. 15 21:00 – 22:00 XP (1h00m/DVD) Number of chapters in title 3 Elapsed title time (For CD, WMA, MP3, Super VCD, shows elapsed track time; for Video CD, shows elapsed disc time.) Total running time of title 5 Angle indicator Lights during multi-angle scenes. 2 3 4 Play DVD-R Video 3–2 0.
DVR-433H_UK.book 37 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 Chapter 5 Recording About DVD recording About HDD recording This recorder can record on both DVD-R and DVD-RW media. The main difference between the two is that DVD-R discs can only be recorded once, while DVD-RW can be recorded, erased and re-recorded many times.
DVR-433H_UK.book 38 ページ 2005年3月1日 05 火曜日 午後5時6分 Recording Recording time and picture quality 1 There are six preset recording quality modes : • XP – High quality setting, gives about one hour of recording time on a DVD disc. • SP (Standard Play) – Default quality, used for most applications, gives about two hours of recording time on a DVD. • LP (Long Play) – Lower video quality than SP, but doubles the recording time on a DVD to about four hours.
DVR-433H_UK.book 39 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 Setting the picture quality/recording time VR mode Video mode HDD Before starting a recording, you will usually want to set the picture quality/recording time. There are six standard settings available, which allow you to choose a balance between picture quality and recording time. When Manual Recording is set to On (see Manual Recording on page 97), a further option will be available (MN1–32, LPCM or XP+, depending on what you set).
DVR-433H_UK.book 40 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 4 Use the AUDIO (SHIFT + 1) button to select the audio channel to record. See Changing audio channels on page 29 for more on this. • When recording in VR mode, if a broadcast is bilingual, both audio channels are recorded, allowing you to switch the audio channel on playback. The only exception to this is when the picture quality is set to LPCM, in which case you do need to select the audio channel before recording.
DVR-433H_UK.book 41 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 Setting a timer recording VR mode Video mode HDD Using the timer recording features you can program up to 32 timer recordings up to a month in advance. Timer recording programs can be set to record just once, every day, or every week.
DVR-433H_UK.book 42 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 Easy Timer Recording As the name suggests, Easy Timer Recording makes setting up a timer recording as simple as possible. STANDBY/ON DISPLAY HELP • HDD recording: The AUTO option automatically sets the best recording quality that would fit on to a blank DVD disc. HDD/DVD TV/DVD INPUT SELECT • DVD recording: The AUTO option automatically sets the best recording quality for the space available on the disc loaded at the time of recording.
DVR-433H_UK.book 43 ページ 2005年3月1日 火曜日 午後5時6分 Recording 6 05 Press ENTER to set the end time. 7 Select ‘Yes’ to set the timer recording and exit, or ‘No’ to go back to the timer recording screen. 1 Press ‘VIDEO Plus+ (SHIFT + MENU)’ to display the VIDEO Plus+ program screen. You can also access this screen from the Home Menu (press HOME MENU, select Timer Recording, then VIDEO Plus+).
DVR-433H_UK.book 44 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 VIDEO Plus+ programming with the power off You can enter a PlusCode programming number when the recorder is in standby. Note that the recording is always made to the HDD. If you want to record to a DVD disc, you’ll need to switch on the power and use the full VIDEO Plus+ program screen. DISPLAY HELP TV/DVD INPUT SELECT • If CAN’T SET appears in the display, it means that although you entered a valid number, the program has already finished.
DVR-433H_UK.book 45 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 2 Select ‘New Input’ to set a new timer program, then press ENTER. Timer Program Set Manhattan Open Tennis CH Date Pr 10 SAT 26/3 Start Stop 18:00 Detailed Settings Record To Recording Mode Auto Replace Rec. Genre Bilingual Recording HDD Recording Format 21:00 Enter Details HDD XP On No Category A/L Video Mode On Extend 30 min Store Program Set Detailed Set Title Name Cancel 3 Enter the timer recording settings.
DVR-433H_UK.book 46 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 • If the HDD is being used for playback or high-speed copying when an Auto Replace Recording is due to start, the new timer recording will not replace the old one. However, the next time the timer recording starts, both of the older two programs will be erased. Extending a timer recording in progress You can extend a timer recording beyond the programmed end time in two different ways.
DVR-433H_UK.book 47 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 Canceling and stopping a timer recording in progress After a timer recording has started, you can cancel the program (but continue recording), or stop recording completely if you need to.
DVR-433H_UK.book 48 ページ 2005年3月1日 05 火曜日 午後5時6分 Recording Simultaneous recording and playback VR mode HDD Recording from an external component VR mode A feature called Chase Play makes it possible to watch a recording in progress (DVD or HDD) from the start of the recording (as in, playback is ‘chasing’ the recording).
DVR-433H_UK.book 49 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 Check that the Audio In settings for External Audio, Bilingual Recording and DV Input are as you want them (see Audio In Settings on page 94). • If the aspect ratio is distorted (squashed or stretched), adjust on the source component or your TV before recording. 3 Set up the recorder. • Use REC MODE (SHIFT + ) to set the recording quality. See Setting the picture quality/recording time on page 39 for detailed information.
DVR-433H_UK.book 50 ページ 2005年3月1日 05 火曜日 午後5時6分 Recording Important Recording from a DV camcorder VR mode Video mode • The source signal must be DVC-SD format HDD • Some camcorders cannot be controlled using this recorder’s remote. You can record from a DV camcorder connected to the DV IN jack on the front panel of this recorder. Using the recorder’s remote, you can control both the camcorder and this recorder.
DVR-433H_UK.book 51 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 • Depending on your camcorder, you can use this recorder’s remote to control the camcorder using the , , , , , / and / buttons. 7 Use the / buttons to select ‘Start Rec’ and press ENTER. Stop 1.02.22 Stop Control with these buttons Start Rec Pause Rec Stop Rec HDD Rem. SP (2h00m/DVD) 32h45m • Recording is automatically paused if the recorder detects no signal, or a copy-protected signal.
DVR-433H_UK.book 52 ページ 2005年3月1日 火曜日 午後5時6分 Recording 05 2 Press HOME MENU and select ‘Disc Setup’. 3 Select ‘Finalize’. Initializing a recordable DVD disc Disc Setup Basic Finalize Next Screen Initialize Finalize Undo Finalize Start Optimize HDD When you first load a blank disc, the recorder will initialize it automatically for recording. You can also manually initialize discs for either Video mode recording or VR mode recording.
DVR-433H_UK.book 53 ページ 2005年3月1日 火曜日 午後5時6分 Playback 06 Chapter 6 Playback Introduction Most of the features described in this chapter make use of on-screen displays. Navigate these using the / / / and ENTER. To go back one level from any screen, use the RETURN button. Remember also that the button guide at the bottom of every screen shows which buttons do what.
DVR-433H_UK.book 54 ページ 2005年3月1日 火曜日 午後5時6分 Playback 06 CD Video CD Super VCD • You can change the thumbnail picture displayed for a title; see Set Thumbnail on page 76. MP3 1 During playback, use the number buttons to input a track number. For example, for track 6, press 6; for track 24, press 2, then 4. 4 To play the highlighted title, press ENTER. • You can also select Play from the command menu options. • To clear and start again, press CLEAR. 2 Optionally: Press ENTER.
DVR-433H_UK.book 55 ページ 2005年3月1日 火曜日 午後5時6分 Playback 06 • Sort Order – Sort by date (most recent first), unwatched first, title name or recording date (oldest first) Using the Disc Navigator with playback-only discs DVD-Video Disc Navigator (HDD) 11 10Titles 23:00 FRI 11/29 MON3/12 7:00PM 23:00 Fri 3/12 Pr 4 SP 11/29Mon 7:00PM 2ch Style Recent first 4 Titles New first 4 Titles By Sort ordertitle 2 By rec.date Recent First NEW first Cancel Genre 3 SP 2h00m(1.0G) 2h00m(1.
DVR-433H_UK.book 56 ページ 2005年3月1日 火曜日 午後5時6分 Playback 06 Scanning discs Playing in slow motion You can fast scan discs at various speeds, forwards or backward.1 RETURN MENU REC MODE DVD HDD Video CD Super VCD You can play video at various slow motion speeds. DVDs and video on the HDD can be played in slow motion in either direction, while Video CD/Super VCDs can only be played forwards in slow motion.3 BACK CM SKIP ONE TOUCH 1 During playback, press or to start reverse or forward scanning.
DVR-433H_UK.book 57 ページ 2005年3月1日 火曜日 午後5時6分 Playback 06 Frame advance/frame reverse DVD HDD 1 Press HOME MENU and select ‘Play Mode’ to display the Play Mode menu screen. Super VCD Video CD Play Mode Search Mode A-B Repeat Repeat Program You can advance or back up video on a DVD disc or the HDD frame-by-frame. With Video CD/Super VCDs, you can only use frame advance.1 RETURN MENU 2 REC MODE SHIFT ONE TOUCH COPY ST0P REC REC During playback, press . 2 Press / frame.
DVR-433H_UK.book 58 ページ 2005年3月1日 06 火曜日 午後5時6分 Playback A-B Repeat DVD CD Video CD HDD 1 Select ‘Repeat’ from the Play Mode menu. 2 Select a repeat play mode. The A-B Repeat function allows you to specify two points (A and B) within a track or title that form a loop which is played over and over.1 Play Mode Search Mode A-B Repeat Repeat Program Repeat Repeat Repeat Repeat Disc Title Chapter Off 1 During playback, select ‘A-B Repeat’ from the Play Mode menu.
DVR-433H_UK.book 59 ページ 2005年3月1日 火曜日 午後5時6分 Playback 06 Program play HDD DVD-Video • To add a folder, select the folder. CD Video CD Super VCD MP3 This feature lets you program the play order of titles/ chapters1/folders/tracks on a disc or the HDD. 1 Select ‘Program’ from the Play Mode menu. 2 Select ‘Input/Edit Program’ from the list of program options.
DVR-433H_UK.book 60 ページ 2005年3月1日 火曜日 午後5時6分 Playback 06 Tip • To save your program list and exit the program edit screen without starting playback, press HOME MENU. • You can change the program list by selecting Input/ Edit Program from the Play Mode Program menu. • During program play, press to skip to the next program step. • Press CLEAR during playback to switch off program play (if no menu OSD, such as the Disc Navigator, is displayed). Press while stopped to erase the program list.
DVR-433H_UK.book 61 ページ 2005年3月1日 火曜日 午後5時6分 Playback 06 Switching DVD soundtracks DVD-Video Switching audio channels VR mode When playing a DVD disc recorded with two or more soundtracks (often in different languages), you can switch the soundtrack during playback.1 Check the disc packaging for details of the soundtrack options.
DVR-433H_UK.book 62 ページ 2005年3月1日 06 火曜日 午後5時6分 Playback Super VCD • 1 Stereo – Soundtrack 1 / Stereo (default) • 1 L – Soundtrack 1 / Left channel • 1 R – Soundtrack 1 / Right channel • 2 Stereo – Soundtrack 2 / Stereo • 2 L – Soundtrack 2 / Left channel • 2 R – Soundtrack 2 / Right channel Switching camera angles DVD-Video Some DVD-Video discs feature scenes shot from two or more angles—check the disc box for details: it should be marked with a icon if it contains multi-angle scenes.
DVR-433H_UK.book 63 ページ 2005年3月1日 火曜日 午後5時6分 Copying and back-up 07 Chapter 7 Copying and back-up Copyright Introduction Use the copying features of this recorder to: • Back up important recordings stored on the HDD to a DVD. • Make a DVD copy of a recording on the HDD to play in another player. Recording equipment should be used only for lawful copying and you are advised to check carefully what is lawful copying in the country in which you are making a copy.
DVR-433H_UK.book 64 ページ 2005年3月1日 07 火曜日 午後5時6分 Copying and back-up Canceling One Touch Copy You can cancel a One Touch Copy once it’s started. Using Copy Lists • Press and hold ONE TOUCH COPY for more than a second. Copying is canceled and the video already copied is erased. * See also Copyright on page 63. • If you cancel a HDD to DVD-R copy, the space available for recording does not return to the precopy figure.
DVR-433H_UK.book 65 ページ 2005年3月1日 火曜日 午後5時6分 Copying and back-up 2 Select ‘HDD DVD’. If this is the first time to create a Copy List, skip to step 4 below. 07 5 Use the / buttons to highlight titles you want to copy, pressing ENTER after each one to add it to the Copy List.
DVR-433H_UK.book 66 ページ 2005年3月1日 火曜日 午後5時6分 Copying and back-up 07 7 Select ‘Next’ to move on to the Title Edit screen. Copy • Bilingual – Set how bilingual audio should be copied when copying from HDD to Video mode DVD (see page 71). 3 Title HDD DVD (Video mode) Edit Title 1 19:00 Mon 29/11 Pr 2 SP 2 19:00 Mon 29/11 Pr 2 SP 3 19:00 Mon 29/11 Pr 2 SP Next 19:00 Mon 29/11 Pr 2 Press to display the command menu panel. 10 Select ‘Next’ to proceed to the Start Copy screen. 1.2G 1.
DVR-433H_UK.book 67 ページ 2005年3月1日 火曜日 午後5時6分 Copying and back-up 8 Press to display the command menu panel. 9 Select ‘Next’ to proceed to the Start Copy screen. • Select Recording Mode if you want to change the recording quality (see Recording Mode on page 70). Important • The DVD to HDD Copy screen isn’t accessible when a finalized Video mode disc is loaded. However, you can still use the One Touch Copy function (See One Touch Copy on page 63).
DVR-433H_UK.book 68 ページ 2005年3月1日 火曜日 午後5時6分 Copying and back-up 07 • Select CAPS or small to change to upper or lowercase, or use the CASE SELECTION buttons ( / ). • You can also use the CLEAR button to delete characters directly (press and hold for two seconds to delete the whole name). For other remote control key shortcuts, see Using the remote key shortcuts to input a name on page 76. 4 Highlight ‘From’ then use the playback controls ( , , , , etc.
DVR-433H_UK.book 69 ページ 2005年3月1日 火曜日 午後5時6分 Copying and back-up 07 Preview Combine Use this command to check what’s in a title. Use this command to make a single title from two titles in the Copy List. The second title selected will be appended to the first. 1 Highlight the title you want to preview. 2 Select ‘Preview’ from the command menu panel. The selected title starts to play. Use any of the usual playback controls to scan, skip, play in slow-motion, etc.
DVR-433H_UK.book 70 ページ 2005年3月1日 火曜日 午後5時6分 Copying and back-up 07 • Video Mode Compatible Editing – Edit points cannot be set with absolute precision, but highspeed copying to Video mode DVD will be possible. • Frame Accurate Editing – Exact edit points are preserved, but high-speed copying to Video mode DVD will not be possible.
DVR-433H_UK.book 71 ページ 2005年3月1日 火曜日 午後5時6分 Copying and back-up When you change the recording mode setting, you can see how much disc space it will require. If this is more than is available, it shows up in red and you won’t be able to start copying. In this case, either change the recording quality, or press RETURN to go back to the Copy List screen and erase one or more titles from the Copy List.
DVR-433H_UK.book 72 ページ 2005年3月1日 07 火曜日 午後5時6分 Copying and back-up 6 Select ‘Start’ to start writing the backed-up data to the blank disc. Disc Back-up Write back-up data from Hard Disk Drive. The disc contents will be overwritten. OK to start? Start Cancel • To see the progress of the back-up, press DISPLAY (SHIFT + HELP). • You can cancel the back-up process by pressing ONE TOUCH COPY for more than one second.
DVR-433H_UK.book 73 ページ 2005年3月1日 火曜日 午後5時6分 Editing 08 Chapter 8 Editing The Disc Navigator screen The Disc Navigator screen is where you can edit video content on unfinalized Video mode and VR mode DVD discs1, as well as video content on the internal hard disk drive. 1 Use the HDD/DVD button to select the HDD or DVD. 2 Press DISC NAVIGATOR to display the Disc Navigator screen. Playback will automatically stop when you do this.
DVR-433H_UK.book 74 ページ 2005年3月1日 08 火曜日 午後5時6分 Editing Command menu panel options The table below shows which commands you can use with which video type.
DVR-433H_UK.book 75 ページ 2005年3月1日 火曜日 午後5時6分 Editing 08 Create VR mode Erase Play List only HDD Video mode VR mode Use this function to create a Play List and add titles to it. Use this function to erase unwanted titles. Before you can use this command, make sure that the Play List Pis switched on in the view options panel on the left. When you erase titles from the HDD or Original titles from a VR mode DVD-RW, the available recording space increases accordingly.
09 Editing.fm 76 ページ 2005年3月1日 火曜日 午後5時27分 Editing 08 3 Input a name for the selected title. Input Title Name 12:30 Wed 4/01 Pr 1 SP ABC DE F GH I J KLM . , ? ! N O P Q R S T U V WX Y Z ( ) : ; AA A A A AÆ ç E E E E I I I I # DN O OOO 0 1 2 3 4 5 + – /@ [ c £ \ § 2 3 ´ µ¶ · OK Clear O ø UUUUY 6 7 8 9 < ¥ ] ˆ ÷ x ¨ © a– << ¬ ¸ 1 –o 1/4 << CAPS small = > ± { _| – ® 1 3 /2 /4 ¿ ß$% _ & } ~ ¡ ˚ ` Space • Use the / / / and ENTER to select characters.
DVR-433H_UK.book 77 ページ 2005年3月1日 火曜日 午後5時6分 Editing 08 3 Use the playback controls ( , , , , etc.) to find a suitable frame, then press ENTER to set. Set Thumbnail (HDD) 19:00 Mon 29/11 Pr 2 Rec. time SP 0h01m 4 Highlight ‘From’ then use the playback controls ( , , , , etc.) to find the start of the section to erase, then press ENTER. The bar at the bottom of the screen indicates the current play position in the title. After pressing ENTER, a marker shows the start of the section.
DVR-433H_UK.book 78 ページ 2005年3月1日 火曜日 午後5時6分 Editing 08 • Frame Accurate Editing – Exact edit points are preserved, but high-speed copying to Video mode DVD will not be possible. • Video Mode Compatible Editing – Edit points cannot be set with absolute precision, but highspeed copying to Video mode DVD will be possible.
DVR-433H_UK.book 79 ページ 2005年3月1日 火曜日 午後5時6分 Editing 08 Set Genre 2 Select ‘Edit’ > ‘Lock’ from the command menu panel. HDD Use this command to assign a genre to a title. 1 Disc Navigator (HDD) 101 Highlight the title you want to assign a genre to. 10Titles 23:00 FRI 11/29 MON3/12 7:00PM Play 23:00 Fri 3/12 Pr 4 2ch SP 11/29Mon 7:00PM Title SP name Erase 2h00m(1.0G) 2h00m(1.0G) Set Thumbnail 4 Titles 2 Select ‘Edit’ > ‘Set Genre’ from the command menu panel.
DVR-433H_UK.book 80 ページ 2005年3月1日 08 火曜日 午後5時6分 Editing 2 Use the / buttons to select one of the userdefinable genre names, then press ENTER. Combine VR mode Play List only Use this function to combine two Play List titles into one. Disc Navigator (HDD) 1 Highlight the title you want to combine. This title will remain in the same place after combining with another title.
DVR-433H_UK.book 81 ページ 2005年3月1日 火曜日 午後5時6分 Editing 3 08 Select ‘Next’ from the command menu panel. Disc Navigator (HDD) Multi-Mode 10Titles 23:00 FRI 3/12 23:00 Fri 3/12 Pr 4 SP 2h00m(1.0G) 4 Titles 9 20:00 FRI 3/12 20:00 Fri 3/12 Pr 9 SP Next Recent First 2h00m(1.
DVR-433H_UK.book 82 ページ 2005年3月1日 09 火曜日 午後5時6分 Using the Jukebox Chapter 9 Using the Jukebox The Jukebox feature allows you to use the recorder’s HDD to store and playback music from up to 999 of your CDs. Once on the HDD, you can name albums, assign them a genre, and set tracks that you don’t want to play to Jump. STANDBY/ON DISPLAY HELP HDD/DVD TV/DVD INPUT SELECT CLEAR AUDIO SUBTITLE ANGLE Copying CDs to the HDD CHANNEL The first step is to copy some CDs to your HDD.
DVR-433H_UK.book 83 ページ 2005年3月1日 火曜日 午後5時6分 Using the Jukebox 09 Selecting a track from an album to play Playing music from the Jukebox You can select albums or individual tracks from the Jukebox to play.1 1 Use the / buttons to select the album containing the track you want to play, then press . All tracks set to play 1 Press Home Menu and select ‘Jukebox’. The album list is displayed.
DVR-433H_UK.book 84 ページ 2005年3月1日 09 火曜日 午後5時6分 Using the Jukebox Changing the album view 1 From the album list, press to display the view options menu panel. 2 Select the view option you want, then press ENTER.
DVR-433H_UK.book 85 ページ 2005年3月1日 火曜日 午後5時6分 The PhotoViewer 10 Chapter 10 The PhotoViewer From the PhotoViewer you can view JPEG photos and picture files stored on a CD-ROM/R/RW 1 on your TV. Currently selected thumbnail PhotoViewer File Date/Time Currently selected folder in folder list Pages in folder list 01. 02. 03. 04. 05. 06. 07. 08. 12/12 12/13 12/14 12/15 12/16 12/17 12/18 12/19 Chair No.
DVR-433H_UK.book 86 ページ 2005年3月1日 10 火曜日 午後5時6分 The PhotoViewer Reloading files from a disc If you have a disc with a large number of files and/or folders, you can still view all the images using the reload function. 1 Use the button to navigate to the last entry in the folder list (‘Read next: ...’). 2 Press ENTER to load the next batch of up to 999 files/99 folders from the disc. It will take a moment (at most a minute) to load in the images.
DVR-433H_UK.book 87 ページ 2005年3月1日 火曜日 午後5時6分 The Disc Setup menu 11 Chapter 11 The Disc Setup menu From the Disc Setup menu you can name discs, lock the contents to prevent accidental recording and erasure, initialize and finalize discs. The Disc Setup menu is accessed from the Home menu: • / • Use the position. Introduction Press HOME MENU and select ‘Disc Setup’. buttons to change the cursor • Select CAPS or small to change to upper or lowercase, or use the CASE SELECTION buttons ( / ).
DVR-433H_UK.book 88 ページ 2005年3月1日 火曜日 午後5時6分 The Disc Setup menu 11 New DVD-R discs are ready for Video mode recording when you load them, but it is also possible to initialize them for VR mode recording. Important • Optimizing the HDD can take as long as eight hours. During optimization, playback and recording are not possible. The initialize menu here lets you reinitialize a disc, for example if you want to change the recording format of the disc.
DVR-433H_UK.book 89 ページ 2005年3月1日 火曜日 午後5時6分 The Video/Audio Adjust menu 12 Chapter 12 The Video/Audio Adjust menu Using the Video/Audio Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc playback, and for recording. Setting the picture quality for TV and external inputs You can press DISPLAY (SHIFT + HELP) to see the individual settings for the current preset (Tuner, VCR or LDP).
DVR-433H_UK.book 90 ページ 2005年3月1日 火曜日 午後5時6分 The Video/Audio Adjust menu 12 • White AGC – Turn on for automatic white level adjustment.1 • Memory1 – user preset 1 • White Level – Adjusts the intensity of white. • Memory3 – user preset 3 • Black Level – Adjusts the intensity of black. • Black Setup – Corrects the standard reference black level (NTSC video input only).
DVR-433H_UK.book 91 ページ 2005年3月1日 火曜日 午後5時6分 The Video/Audio Adjust menu 12 • Black Level – Adjusts the intensity of black. • Black Setup – Corrects the standard reference black level (NTSC video playback only). • Gamma Correction – Adjusts the brightness of darker images. • Hue – Adjusts overall balance between red and green. • Chroma Level – Adjusts how rich the colours appear. 4 Use the / buttons to adjust the currently selected picture quality setting.
DVR-433H_UK.book 92 ページ 2005年3月1日 13 火曜日 午後5時6分 The Initial Setup menu Chapter 13 The Initial Setup menu Using the Initial Setup menu The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on. Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu. Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
DVR-433H_UK.book 93 ページ 2005年3月1日 火曜日 午後5時6分 The Initial Setup menu 13 Options Explanation Auto Scan Select your country and then wait for the recorder to auto tune into channels in your area. After auto scan has finished, the channel mapping screen appears showing which channels have been assigned to which program numbers. You can skip unwanted channels using the Manual Channel Setting option below. Press HOME MENU to exit the channel mapping screen.
DVR-433H_UK.book 94 ページ 2005年3月1日 13 火曜日 午後5時6分 The Initial Setup menu Setting Options Explanation Component Video Out Interlace • Select if your monitor/TV is not compatible with progressive-scan video. Progressive Select if your monitor/TV is progressive-scan compatible. Check the operating instructions that came with your monitor/TV if you’re not sure. For Component Video Out to be effective, the AV1 Out setting (see below) must be set to something other than RGB.
DVR-433H_UK.book 95 ページ 2005年3月1日 火曜日 午後5時6分 The Initial Setup menu 13 Setting Options Explanation Bilingual Recording A/L • Record the left (A) channel of a bilingual source when recording to HDD with HDD Recording Format set to Video Mode ON, to DVD in Video mode or in LPCM mode, from an external source. B/R As above, but for right (B) channel recording.
DVR-433H_UK.book 96 ページ 2005年3月1日 13 火曜日 午後5時6分 The Initial Setup menu Setting Options Explanation English • Sets the language of the on-screen displays to English. available languages Choose from the languages displayed for the on-screen displays. English • Sets the default audio language for DVD-Video playback to English. available languages Choose from the languages displayed to set the default audio language for DVD-Video playback.
DVR-433H_UK.book 97 ページ 2005年3月1日 火曜日 午後5時6分 The Initial Setup menu Setting 13 Options Explanation On (go to setup) All the standard recording modes, plus MN1–32, LPCM and XP+ modes can be set. Off • Just the standard recording modes (XP, SP, LP, EP, SLP and SEP) can be set. Recording Settings Manual Recording See also Manual recording modes on page 107 for detailed information on manual recording levels.
DVR-433H_UK.book 98 ページ 2005年3月1日 13 火曜日 午後5時6分 The Initial Setup menu Setting Options Explanation Still Picture Field Produces a stable, generally shake-free image. Frame Produces a sharper image, but more prone to shake than Field stills. Auto • The recorder automatically selects Field or Frame type still, according to the material playing. On Playback is smooth, but with a trade-off against the accuracy of the edit points.
DVR-433H_UK.book 99 ページ 2005年3月1日 火曜日 午後5時6分 The Initial Setup menu 13 Additional information about the TV system settings About the input line system This recorder is compatible with PAL, SECAM, 3.58 NTSC and PAL-60 TV systems. The Input Line System and Input Colour System settings determine how the recorder treats incoming video signals from an external input or the built-in TV tuner.
DVR-433H_UK.book 100 ページ 2005年3月1日 火曜日 午後5時6分 The Initial Setup menu 13 Selecting other languages for language options 1 Select ‘Other’ from the language list. This option appears in the settings for DVD Menu Language, Audio Language, and Subtitle Language. 2 Select the language you want.
DVR-433H_UK.book 101 ページ 2005年3月1日 火曜日 午後5時6分 Additional information 14 Chapter 14 Additional information Screen sizes and disc formats When viewing on a standard TV or monitor Screen format of disc Setting Appearance 16:9 4:3 (Letter Box) The program is shown in widescreen with black bars at the top and bottom of the screen. 4:3 (Pan & Scan) The sides of the program are cropped so that the picture fills the whole screen. 16:9 The program appears squashed.
DVR-433H_UK.book 102 ページ 2005年3月1日 火曜日 午後5時6分 Additional information 14 Minimum copying times The table below shows the minimum HDD to DVD copying time for one hour of video. Please note that not all discs are compatible with high-speed copying. 1 Check with the disc manufacturer for compatibility. DVD disc type Rec mode DVD-RW Ver. 1.0, 1.1*1 DVD-R Ver. 2.0 DVD-RW Ver. 1.1/2x*2 DVD-R Ver. 2.0/4x*3 DVD-RW Ver. 1.2/4x*3 DVD-RW Ver. 1.2/6x DVD-R Ver. 2.0/8x*4 DVD-R Ver. 2.1/8x*4 DVD-R Ver. 2.
DVR-433H_UK.book 103 ページ 2005年3月1日 火曜日 午後5時6分 Additional information 14 Troubleshooting Incorrect operation is often mistaken for trouble and malfunction. If you think there is something wrong with this component, please check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
DVR-433H_UK.book 104 ページ 2005年3月1日 14 火曜日 午後5時6分 Additional information Problem Remedy The picture from the external input • If the video signal from the external component is copy-protected, you cannot is distorted connect via this recorder. Connect the component directly to your TV. The picture is distorted • Change the Input Line System setting (page 99). (You can also change it by pressing the button and OPEN/CLOSE on the front panel simultaneously with the recorder stopped.
DVR-433H_UK.book 105 ページ 2005年3月1日 火曜日 午後5時6分 Additional information 14 Problem Remedy Can’t use One Touch Copy (HDD to DVD) • Make sure that there is a recordable DVD loaded with some free space for recording and fewer than 99 titles already on the disc. Also make sure that for a Video mode disc, the disc isn’t finalized. • If the title currently playing contains material that is copy-once protected, One Touch Copy will not work.
DVR-433H_UK.book 106 ページ 2005年3月1日 14 火曜日 午後5時6分 Additional information • Can I use high-speed copy to copy from DVD to HDD? You can only use high-speed copy from DVD to HDD when copying Original titles from a VR mode DVD-R or DVD-RW disc. See also Copying from DVD to HDD on page 67. • Can I copy a copy-once protected program from a subscription satellite or cable channel to a DVD from the HDD? Yes, you can use high-speed copy to copy to a VR mode disc.
DVR-433H_UK.book 107 ページ 2005年3月1日 火曜日 午後5時6分 Additional information 14 Manual recording modes The table below shows the approximate recording times for a VR mode and Video mode DVD in each manual recording mode, as well as the standard recording mode equivalents. Levels separated by a bold line show where there is a noticeable change in picture quality. Audio recording in all manual recording modes is in Dolby Digital 2ch format, except for LPCM mode, which is in Linear PCM format.
DVR-433H_UK.
DVR-433H_UK.book 109 ページ 2005年3月1日 火曜日 午後5時6分 Additional information 14 On-screen displays and recorder displays The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning. Message Explanation/Action • Initializing disc. Please wait a moment. When you load a blank DVD-RW disc, the recorder automatically initializes it. • Incompatible region number.
DVR-433H_UK.book 110 ページ 2005年3月1日 14 110 En 火曜日 午後5時6分 Additional information Message Explanation/Action • There is no DV input or the input signal is unrecordable. • Cannot preview because there is no DV input or the input signal is unrecordable. No signal was detected at the DV IN jack. This may appear if a blank section of DV tape is playing in the connected camcorder. • HDD optimization is recommended. This can be done using Disc Setup.
DVR-433H_UK.book 111 ページ 2005年3月1日 火曜日 午後5時6分 Additional information 14 Damaged discs Resetting the recorder If you need to, you can reset the recorder to all its factory settings. 1 Make sure that the recorder is on. 2 Press and hold and press STANDBY/ON. The recorder turns off with all settings reset. Discs spin at high speed inside the recorder. If you can see that a disc is cracked, chipped, warped, or otherwise damaged, don't risk using it; you could end up damaging the recorder.
DVR-433H_UK.book 112 ページ 2005年3月1日 14 火曜日 午後5時6分 Additional information Hints on installation We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it: Do... Use in a well-ventilated room. Place on a solid, flat, level surface, such as a table, shelf or stereo rack. Don’t... Use in a place exposed to high temperatures or humidity, including near radiators and other heatgenerating appliances.
DVR-433H_UK.book 113 ページ 2005年3月1日 火曜日 午後5時6分 Additional information 14 DRM (Digital Rights Management) Glossary Analog audio An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also Digital audio. Aspect ratio The width of a TV screen relative to its height.
DVR-433H_UK.book 114 ページ 2005年3月1日 14 火曜日 午後5時6分 Additional information MPEG audio An audio format used on Video CDs and some DVD discs. This unit can convert MPEG audio to PCM format for wider compatibility with digital recorders and AV amp/receivers. See also PCM. MPEG video The video format used for Video CDs and DVDs. Video CD uses the older MPEG-1 standard, while DVD uses the newer and much better quality MPEG-2 standard.
DVR-433H_UK.book 115 ページ 2005年3月1日 火曜日 午後5時6分 Additional information 14 Tuner Specifications Receivable channels SECAM B/G PAL B/G General System . . . . . . . . . . . . . . . . . . HDD, DVD-Video, DVD-R/RW, Video-CD, Super VCD, CD, CD-R/RW (WMA, MP3, JPEG, CD-DA) Power requirements . . . . . . . . . . . . . . . 220–240 V, 50/60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 W Power consumption in standby mode 0.93 W (Front panel display: off) Weight . . . . . . . .
DVR-433H_UK.book 116 ページ 2005年3月1日 14 火曜日 午後5時6分 Additional information Component video output Output level . . . . . . . . . . . . . . . . . . . . . . . . Y: 1.0 Vp-p (75 Ω) PB, PR: 0.7 Vp-p (75 Ω) Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RCA jacks RGB input Input level. . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.7 Vp-p (75Ω) Jacks. . . . . . . . . . . . . . . . . . . . . . . . AV connector 2 (Input 1) RGB output Output level . . . . . . . . . . . . . .
DVR-433H_UK.
DVR-433H_UK.
DVR-433H_UK.book 120 ページ 2005年3月1日 火曜日 午後5時6分 Published by Pioneer Corporation. Copyright © 2005 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.