00 Cover_back_TF.fm 1 ページ 2007年7月2日 月曜日 午後4時18分 HDD/DVD RECORDER Operating Instructions PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.
DVRLX70_TF_EN.book 2 ページ 2007年8月1日 水曜日 午後4時14分 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.
DVRLX70_TF_EN.
DVRLX70_TF_EN.book 4 ページ 2007年8月1日 水曜日 午後4時14分 01 Contents 01 Before you start 05 Recording What’s in the box . . . . . . . . . . . . . . . . . . . 6 Putting the batteries in the remote control. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Using the remote control. . . . . . . . . . . . . . 6 Disc/content format playback compatibility . . . . . . . . . . . . . . . . . . . . . . . 7 About the internal hard disk drive . . . . . . 12 Symbols used in this manual . . . . . . . . .
DVRLX70_TF_EN.book 5 ページ 2007年8月1日 水曜日 07 Playing and recording from a DV camcorder Playing from a DV camcorder . . . . . . . . . 64 Recording from a DV camcorder . . . . . . . 64 About DV. . . . . . . . . . . . . . . . . . . . . . . . . 66 08 Editing Editing options . . . . . . . . . . . . . . . . . . . . 67 The Disc Navigator screen. . . . . . . . . . . . 68 09 Copying and backup Introduction . . . . . . . . . . . . . . . . . . . . . . 79 One Touch Copy . . . . . . . . . . . . . . . . . . .
DVRLX70_TF_EN.book 01 6 ページ 2007年8月1日 水曜日 午後4時14分 Before you start Chapter 1 Before you start What’s in the box Please confirm that the following accessories are in the box when you open it; • • • • • • Remote control AA/R6P dry cell batteries x 2 Audio/video cable (red/white/yellow) RF antenna cable Power cable These operating instructions • When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.
DVRLX70_TF_EN.book 7 ページ 2007年8月1日 水曜日 午後4時14分 Before you start • You can control this recorder using the remote sensor of another Pioneer component via the CONTROL IN jack on the rear panel. See Rear panel connections on page 14 for more information. Disc/content format playback compatibility Compatible media • DVD-RW ver. 1.1 / 1x / 1x to 2x, ver. 1.2 / 2x to 4x / 2x to 6x • DVD-R ver. 2.0 / 1x / 1x to 4x / 1x to 8x / 1x to 16x, ver. 2.1 / 1x to 8x / 1x to 16x • DVD+RW 1x to 2.4x / 1x to 4x / 3.
DVRLX70_TF_EN.book 01 8 ページ 2007年8月1日 水曜日 午後4時14分 Before you start HDD/DVD Recording and playback compatibility This recorder can play and record all widely-used DVD disc types, and additionally provides HDD functionality. The table below shows some specific compatibility differences between the different disc types.
DVRLX70_TF_EN.book 9 ページ 2007年8月1日 水曜日 午後4時14分 Before you start Using DVD-R DL/DVD+R DL discs DVD-R DL (Dual-Layer) and DVD+R DL (Double-Layer) discs contain two recordable layers on a single side, giving about 1.8 times the recording capacity of a conventional single-layer disc. This unit can record to both DVD-R DL and DVD+R DL discs. • If you intend to play DVD-R DL (Video mode) or DVD+R DL discs recorded on this unit on other DVD recorders/players, you must finalize them.
DVRLX70_TF_EN.book 01 10 ページ 2007年8月1日 WMA (Windows Media™ Audio) content This recorder can playback Windows Media Audio content. WMA is an acronym for Windows Media Audio and refers to an audio compression technology developed by Microsoft Corporation. Windows Media is a trademark of Microsoft Corporation. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.
DVRLX70_TF_EN.book 11 ページ 2007年8月1日 水曜日 午後4時14分 Before you start Some DivX VOD content may only be playable a fixed number of times. When you load a disc containing this type of DivX VOD content, the remaining number of plays is shown on-screen and you then have the option of playing the disc (thereby using up one of the remaining plays), or stopping. If you load a disc that contains expired DivX VOD content (for example, content that has zero remaining plays), the message Rental Expired is displayed.
DVRLX70_TF_EN.book 01 12 ページ 2007年8月1日 The internal hard disk drive (HDD) is a fragile piece of equipment. When used without the proper care or in the wrong conditions, it is possible that recorded contents may be damaged or lost entirely, in some cases making even normal playback or recording impossible. Please understand that in the event of repair or replacement of the HDD or related components, all your HDD recordings will be lost.
DVRLX70_TF_EN.book 13 ページ 2007年8月1日 Before you start 水曜日 午後4時14分 01 Symbols used in this manual The following icons are provided to help you quickly identify which instructions you need for which kind of disc. HDD HDD DVD Any type of DVD disc (recordable or playback only), finalized or not. DVD-Video Commercially produced DVD, finalized Video mode DVD-R/-RW.
DVRLX70_TF_EN.book 02 14 ページ 2007年8月1日 水曜日 午後4時14分 Connections Chapter 2 Connections Rear panel connections 1 2 3 ANTENNA IN 4 PR R AUDIO INPUT 3 VIDEO L COMPONENT VIDEO OUT PB Y DIGITAL AUDIO OUT OUTPUT 2 S-VIDEO S-VIDEO 5 AC IN CONTROL HDMI OUT COAXIAL IN OUT INPUT 1/AUTO START REC 6 R L AUDIO 7 VIDEO OUTPUT 1 8 9 1 ANTENNA IN (RF IN)/OUT Connect your TV antenna to the ANTENNA IN (RF IN) jack.
DVRLX70_TF_EN.book 15 ページ 2007年8月1日 Connections 水曜日 午後4時14分 02 Front panel connections On the front panel there is a flip-down cover that hides more connections. Left side: DV IN 11 USB 12 13 11 DV IN A DV input i.LINK connector, suitable for connecting a DV camcorder. 12 USB port (Type B) USB port for connecting a PictBridgecompatible printer or PC. 13 USB port (Type A) USB port for connecting a digital camera, keyboard or other USB device.
DVRLX70_TF_EN.book 16 ページ 2007年8月1日 Easy connections The setup described here is a basic configuration that allows you to record TV programmes on both this recorder and your VCR. When watching recordings from this recorder, set your TV to input 1; switch to input 2 to watch a video playing in the VCR. Important • This recorder is equipped with copy protection technology.
DVRLX70_TF_EN.book 17 ページ 2007年8月1日 水曜日 午後4時14分 Connections 02 Using other types of video output 1 Connecting using an S-Video output S-Video carries the picture as separate colour and luminance (brightness) signals. This recorder has standard (composite), S-Video and component video outputs. The main difference between them is the quality of the picture. S-Video delivers a better picture than composite video, while component video gives better picture quality still.
DVRLX70_TF_EN.book 02 18 ページ 2007年8月1日 水曜日 午後4時14分 Connections Connecting to a cable box or satellite receiver (1) If you are using a cable box or satellite receiver with only a few scrambled channels, follow the setup on this page1. If many or all the channels are scrambled, we recommend using the setup on the following page. Using the setup on this page you can: ANTENNA IN • Watch one channel while recording another.
DVRLX70_TF_EN.book 19 ページ 2007年8月1日 水曜日 午後4時14分 Connections 02 Connecting to a cable box or satellite receiver (2) From audio/ video output To antenna input If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.1 From antenna Cable box/ output Satellite receiver Using the setup on this page you can: • Record any channel by selecting it on the cable box/satellite receiver.
DVRLX70_TF_EN.book 02 20 ページ 2007年8月1日 水曜日 午後4時14分 Connections Connecting to an AV amplifier or receiver ANTENNA IN (RF IN) To enjoy multichannel surround sound you need to connect this recorder to an AV amplifier/receiver using the digital coaxial output. In addition to the digital connection, we recommend also connecting using the stereo analog connection. You’ll probably also want to connect a video output to your AV amplifier/receiver.
DVRLX70_TF_EN.book 21 ページ 2007年8月1日 水曜日 午後4時14分 Connections 02 Connecting using HDMI If you have an HDMI or DVI-equipped1 monitor or display2, you can connect it to this recorder using an HDMI cable3 (not supplied). The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio. 1 Use an HDMI cable to connect the HDMI OUT connector on this recorder to an HDMI connector on an HDMIcompatible display.
DVRLX70_TF_EN.book 02 22 ページ 2007年8月1日 水曜日 Connections HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surroundsound audio. HDMI features include uncompressed digital video, a bandwidth of up to five gigabits per second (Dual Link), one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.
DVRLX70_TF_EN.book 23 ページ 2007年8月1日 水曜日 午後4時14分 Connections 02 Connecting other AV sources Connecting a DV camcorder You can connect a DV camcorder or DVD recorder with DV output to the front panel DV IN jack.
DVRLX70_TF_EN.book 02 24 ページ 2007年8月1日 水曜日 Connections Important • Some USB devices may not work with this recorder. • When connecting a PC to this unit, make sure the power is turned off on both the PC and this unit when you connect them via USB. • We recommend connecting USB devices when this recorder is switched off (in standby). JPEG file storage devices • Digital still camera • Memory card reader (any type of memory card) • USB memory The Mass Storage Class (MSC) device should be FAT-compatible.
DVRLX70_TF_EN.book 25 ページ 2007年8月1日 水曜日 午後4時14分 Controls and displays 03 Chapter 3 Controls and displays Front panel 1 2 3 4 5 STANDBY/ON DV IN COPY INPUT 2 10 1 DivX indicator Lights when this recorder plays DivX video files. 8 HDMI USB CH 9 7 OPEN/CLOSE HDD/DVD DivX 6 STOP REC ONE TOUCH COPY INPUT SELECT REC MODE S-VIDEO 11 3 COPY indicator Lights when copying is underway.
DVRLX70_TF_EN.book 26 ページ 2007年8月1日 水曜日 午後4時14分 Controls and displays 03 Display 1 2 3 5 4 6 PM L R 10 9 8 7 1 Lights during playback; blinks when playback is paused. 6 SP Lights when the recording mode is set to SP (standard play). 3 Lights during recording; blinks when recording is paused. LP/SLP Lights when the recording mode is set to LP (long play) or SLP (super-long play). 4 PM Lights to indicate PM (after midday) for the clock display.
DVRLX70_TF_EN.book 27 ページ 2007年8月1日 水曜日 午後4時14分 Controls and displays 03 Remote control 6 DVD Press to select the DVD for recording or playback. 1 5 8 10 11 ONE TOUCH COPY OPEN/CLOSE 4 HDD DVD ABC DEF GHI JKL MNO PQRS TUV INPUT SELECT CH WXYZ G-CODE + 15 8 Alphanumeric buttons, + and CLEAR Use the number buttons for track/chapter/ title selection; channel selection, and so on. The same buttons can also be used to enter names for titles, discs and so on.
DVRLX70_TF_EN.book 03 28 ページ 2007年8月1日 14 MENU (page 52) Press to display the disc menu if a DVDVideo disc is loaded. 15 /// and ENTER Used to navigate all on-screen displays. Press ENTER to select the currently highlighted option. 16 HOME MENU Press to display the Home Menu, from which you can navigate all the functions of the recorder. 17 RETURN Press to go back one level in the on-screen menu or display. 18 HELP Press for help on how to use the current GUI screen.
DVRLX70_TF_EN.book 29 ページ 2007年8月1日 水曜日 午後4時14分 Getting started 04 Chapter 4 Getting started Switching on and setting up 4 ENTER When you switch the recorder on for the first time, you can make several basic settings using the Setup Navigator feature. This takes you through setting the clock, the internal TV tuner and the video output. Start the Setup Navigator. k Setting t Line Complete System this setup before you start using your recorder.
DVRLX70_TF_EN.book 30 ページ 2007年8月1日 水曜日 午後4時14分 Getting started 04 • Auto-tuning channels The Auto Scan option automatically scans and sets the channel presets. Tuning 32/68 Cancel • Manual clock setting If no stations in your area are broadcasting time signals, you can set the clock manually. Use the / buttons to set your time zone. You can set this by selecting a city or a time relative to GMT. ENTER 6 Select ‘Auto’ for automatic time setting, or ‘Manual’ to set the clock manually.
04 Getting_Started.fm 31 ページ 2007年9月11日 火曜日 午前11時2分 Getting started ENTER 7 Select the TV screen type, ‘Wide (16:9)’ or ‘Standard (4:3)’. 04 10 ENTER Press to continue after reading the HDD caution. k Setting In the event of HDD failure, recordings may be lost or normal playback/recording may t Line not System be possible. er Save As recordings might be lost in case of a HDD P failure, we recommend to use the HDD only as temporary storage media.
DVRLX70_TF_EN.book 05 32 ページ 2007年8月1日 水曜日 午後4時14分 Recording Chapter 5 Recording About DVD recording DVD-R/-RW Video mode 99 99 DVD-R/-RW/-RAM VR mode 99 999*1 DVD+R/+RW 49 99*2 DVD-R and DVD-RW discs can be initialized for Video mode or VR mode recording. Each has its advantages, and it depends on what you want to do with the recording which mode you choose.
DVRLX70_TF_EN.book 33 ページ 2007年8月1日 水曜日 午後4時14分 Recording • If power to the recorder is cut (due to a power outage, the plug being pulled from the power outlet, etc.) during recording, editing, initializing, finalizing or other operation, some recorded material on the disc, or the disc itself, may become unusable. In this case, try re-initializing the disc (DVD-RW only), or use a new disc. Pioneer is not responsible for lost recordings, damaged discs or other losses in these cases.
DVRLX70_TF_EN.book 05 34 ページ 2007年8月1日 水曜日 Recording When HDD Recording Format is set to Video Mode Off, high-speed copying from HDD to DVD-R/-RW (Video mode) or DVD+R/+RW isn’t possible. However, when SAP is selected as the broadcast audio channel, both the main and SAP channels are recorded and you can switch the audio on playback.
DVRLX70_TF_EN.book 35 ページ 2007年8月1日 水曜日 午後4時14分 Recording CPRM CPRM is a copy protection/scrambling system developed for the recording of ‘copy once’ broadcast programmes. CPRM stands for Content Protection for Recordable Media. This recorder is CPRM compatible, which means that you can record copy-once broadcast programmes, but you cannot then make a copy of those recordings. CPRM recordings can only be made on CPRMcompatible DVD-R (ver. 2.0/8x or higher) or DVD-RW (ver. 1.
DVRLX70_TF_EN.book 05 36 ページ 2007年8月1日 Note • When recording to the HDD with HDD Recording Format set to Video Mode On, to DVD in Video mode, or on the LPCM setting, only one channel of a dual mono broadcast is recorded. In this case, decide which language you want to record before recording by setting the Dual Mono Recording setting (see Dual Mono Recording on page 111). Other: You can change the audio channel of the broadcast or external input signal. AUDIO • Press to change the audio type.
DVRLX70_TF_EN.book 37 ページ 2007年8月1日 水曜日 午後4時14分 Recording • LP (Long Play) – Lower video quality than SP, but doubles the recording time on a DVD to about four hours. • EP (Extended Play) – Lower quality than LP, but gives about six hours of recording time on a DVD disc. • SLP (Super Long Play) – Lower quality than EP, but gives about eight hours of recording time on a DVD disc. • SEP (Super Extended Play) – Lowest video quality but gives about ten hours of recording time on a DVD disc.
DVRLX70_TF_EN.book 38 ページ 2007年8月1日 水曜日 午後4時14分 Recording 05 Other: • When recording in VR mode, if a broadcast is bilingual, both audio channels are recorded, allowing you to switch the audio channel on playback. The only exception to this is when the picture quality is set to LPCM, in which case you do need to select the audio channel before recording. REC 5 Start recording. If you want to set a recording end time, press the REC button repeatedly.
DVRLX70_TF_EN.book 39 ページ 2007年8月1日 水曜日 午後4時14分 Recording Important • A timer recording can’t be set if there are already 32 timer programmes waiting to be recorded. • Timer recording will not start if: – The recorder is already recording. – A disc is being initialized, finalized or unfinalized. • Timer recording will start when the operation preventing timer recording has finished.
DVRLX70_TF_EN.book 40 ページ 2007年8月1日 水曜日 午後4時14分 Recording 05 Each row of the grid is one day (you can set the timer recording for up to a month in advance). Each column is a 15 minute interval. The darker area represents time that has already passed and can’t therefore be selected. The lighter area is time that’s available. ENTER 6 Set the start time. The start date and time is displayed in the middle of the screen. • You can go back and reset the start time if you need to by pressing RETURN.
DVRLX70_TF_EN.book 41 ページ 2007年8月1日 水曜日 午後4時14分 Recording 3 Confirm that the settings are correct. If the channel number isn’t displayed, use the / buttons to highlight CH, then use the / buttons to set the correct channel number. • If the channel number is set, but incorrectly, set up the guide channel (see G-Code CH Setting on page 109). 4 Select ‘Store Programme’ to finish.
DVRLX70_TF_EN.book 05 42 ページ 2007年8月1日 水曜日 午後4時14分 Recording Setting a manual timer recording The timer recording screen you can see all the timer programmes already set, clear programmes and set up new ones. 1 Press TIMER REC to display the Timer Recording screen. You can also access the Timer Recording screen from the Home Menu (press HOME MENU, select Timer Recording, then Timer Recording). 2 Select ‘New Input’ to set a new timer programme, then press ENTER.
DVRLX70_TF_EN.book 43 ページ 2007年8月1日 水曜日 午後4時14分 Recording Auto Replace Rec. – Automatically erases the previous daily or weekly recording when the next one is recorded. Genre – Select a record genre (for HDD recording only). Dual Mono/Bilingual Recording – Select which channel of a dual mono/bilingual broadcast to record (necessary if recording to a Video mode DVD or to the HDD with the HDD Recording Format set to Video Mode On).
DVRLX70_TF_EN.book 44 ページ 2007年8月1日 水曜日 午後4時14分 Recording 05 Editing a timer programme You can change any of the settings in a timer programme before the recording is due to start. 1 3 Press then select ‘Cancel Once’ from the command menu panel. • In the timer programme list, Cancel Once appears by the programme. • You can also just press PAUSE when the timer programme is highlighted. Press TIMER REC. 2 Highlight the timer programme you want to change.
DVRLX70_TF_EN.book 45 ページ 2007年8月1日 水曜日 午後4時14分 Recording 05 Timer recording FAQ ENTER 5 Select ‘Store Programme’. HOME MENU 6 Press to exit the Timer Recording screen. Stopping a timer recording Frequently Asked Questions • Even though the timer is set, the recorder doesn’t start recording! Check that the disc loaded or HDD is recordable, not locked (see Lock Disc on page 102), and that there are fewer than 99/999 titles already on the DVD/HDD. STOP REC 1 Press during a timer recording.
DVRLX70_TF_EN.book 05 46 ページ 2007年8月1日 HDD Chase Play allows you to watch a recording that is still in progress from the start, without having to wait until the recording has finished (i.e., playback is ‘chasing’ the recording). In fact, you’re not just limited to watching the recording in progress.
DVRLX70_TF_EN.book 47 ページ 2007年8月1日 水曜日 午後4時14分 Recording 05 • To watch video coming in via the DV input (front panel), select DV > DV Video Playback from the Home Menu (see also Playing from a DV camcorder on page 64). • If Auto Start Recording is set, it will not start if another timer recording is in progress. • Timer recordings take precedence over Auto Start Recording. Auto Start Recording will stop if a timer recording is due to start.
DVRLX70_TF_EN.book 05 48 ページ 2007年8月1日 • To cancel Auto Start Recording once recording has already started, press REC for three seconds (this cancels Auto Start Recording, but recording continues), then F STOP REC to stop recording. • You can also stop recording by pressing F STOP REC then selecting Yes to confirm. Tip • Alternatively, with no OSD displayed, press and hold the front panel F STOP REC button for more than three seconds to switch Auto Start Recording on directly.
DVRLX70_TF_EN.book 49 ページ 2007年8月1日 水曜日 午後4時14分 Recording 05 • A VR mode DVD-R/-RW (excluding DVD-R DL) disc can still be recorded and edited on this recorder even after finalizing. • DVD-R DL (Video mode) discs and DVD+R DL discs must be finalized in order to play in other recorders/players. Note however that some recorders/ players will not play even finalized duallayer discs. 1 Load the disc you want to finalize. Make sure that the recorder is stopped before proceeding.
DVRLX70_TF_EN.book 05 50 ページ 2007年8月1日 水曜日 Recording DVD+RW and DVD-RAM discs can also be initialized in order to erase the contents of the disc. Important • Initializing a DVD-RW, DVD+RW or DVD-RAM disc will erase everything recorded on it. Make sure there is nothing on the disc that you want to keep! • You may not be able to re-initialize a DVD-RW disc in a different format if it was originally initialized on an older DVD recorder.
DVRLX70_TF_EN.book 51 ページ 2007年8月1日 水曜日 午後4時14分 Playback 06 Chapter 6 Playback Introduction Most of the features described in this chapter make use of on-screen displays. Navigate these using the cursor buttons and ENTER. To go back one level from any screen, use the RETURN button. Remember also that the button guide at the bottom of every screen shows which buttons do what.
DVRLX70_TF_EN.book 52 ページ 2007年8月1日 水曜日 午後4時14分 Playback 06 STOP 4 Press to stop playback. CM BACK SKIP 5 When you’ve finished using the recorder, eject the disc and switch the recorder back into standby. STEP/SLOW Playing DVD discs The table below shows the basic playback controls for DVD-Video, and recordable DVD discs. Press to start playback. If RESUME is displayed onscreen, playback starts from the place last stopped.
DVRLX70_TF_EN.book 53 ページ 2007年8月1日 水曜日 午後4時14分 Playback PREV NEXT ABC DEF GHI JKL MNO PQRS TUV WXYZ CLEAR CLEAR Press to skip to previous/next chapter/title. (During playback you can also use the front panel CH +/– buttons.) During playback, enter a title number then press ENTER to skip directly to that title. Press CLEAR to clear a number entry and start again.
DVRLX70_TF_EN.book 06 54 ページ 2007年8月1日 水曜日 午後4時14分 Playback ABC DEF GHI JKL MNO PQRS TUV WXYZ CLEAR CLEAR ENTER BACK CM SKIP STEP/SLOW RETURN During playback, enter a track number then press ENTER to skip directly to that track. Press CLEAR to clear a number entry and start again. While a PBC menu screen is displayed, use to select numbered menu items. Playing DivX video files The table below shows the basic playback controls for DivX video files.
DVRLX70_TF_EN.book 55 ページ 2007年8月1日 水曜日 午後4時14分 Playback 06 Using the Disc Navigator with recordable discs and the HDD DVD-R DVD-RW DVD+R DVD+RW DVD-RAM HDD You can use the Disc Navigator to browse and edit video on recordable DVDs and the HDD, and to view information on titles. See also Editing on page 67 for more on editing recordable discs. 1 DVD.
DVRLX70_TF_EN.book 56 ページ 2007年8月1日 水曜日 午後4時14分 Playback 06 Using the Disc Navigator with playback-only discs Use the Disc Navigator to browse the contents of a disc and start playback. • Proceed to step 4 when playing back an Audio CD. Disc Navigator (DVD/CD) Track List CD DVD-Video Video CD Super VCD 1 DVD Select DVD. HDD HOME MENU Remain 100.0 G 2 1 Track 01 2 Track 02 3 Track 03 4 Track 04 5 Track 05 6 Track 06 7 Track 07 8 Track 08 Track 0 1 0.04.30 / 1.14.
DVRLX70_TF_EN.book 57 ページ 2007年8月1日 水曜日 午後4時14分 Playback 06 It takes several minutes for files to be reloaded.1 Changing the display style of the Disc Navigator You can display titles by data format or by folder/track. 1 panel. Display the view options ENTER 3 Choose a view option, then press ENTER. The title list display is updated according to the new display preferences. Scanning discs ALL You can scan discs at various speeds, forwards or backwards.
DVRLX70_TF_EN.book 58 ページ 2007年8月1日 水曜日 午後4時14分 Playback 06 STEP/SLOW 1 Press to start slow motion reverse or forward play. • Press menu. PLAY MODE to display the Play Mode Play Mode STEP/SLOW 2 Press repeatedly to change the slow motion speed. The current playback speed is indicated onscreen. Time Search Title Search Chapter Search Search Mode A-B Repeat Repeat Programme PLAY 3 Resume normal playback.
DVRLX70_TF_EN.book 59 ページ 2007年8月1日 水曜日 午後4時14分 Playback Time Search (HDD, DVD): For example, for 25 minutes into the current title, press 2, 5, 0, 0. For 1 hour and 15 minutes and 20 seconds into the title, press 1, 1, 5, 2, 0. Time Search (Video CD): For example, for 2 minutes and 30 seconds into the current track, press 2, 3, 0. Title/Chapter/Track Search: For example, for track 6, press 6. 3 ENTER Start playback.
DVRLX70_TF_EN.book 06 60 ページ 2007年8月1日 水曜日 Playback Tip ENTER 1 Select ‘Programme’ from the Play Mode menu, then ‘Input/Edit Programme’. The Input/Edit Programme screen varies according to the disc type. Below is the DVD input screen. Programme Title Title Title Title Step 01.001 02. 03. 04. 05. 06. 07. 08.
DVRLX70_TF_EN.book 61 ページ 2007年8月1日 水曜日 午後4時14分 Playback SUBTITLE • Select/change the subtitle language. The current subtitle language is shown onscreen and in the front panel display. • To switch off subtitles, press SUBTITLE then CLEAR.
DVRLX70_TF_EN.book 62 ページ 2007年8月1日 水曜日 午後4時14分 Playback 06 CD Video CD WMA/MP3 Stereo – Stereo (default) 1/L – Left channel only 2/R – Right channel only Super VCD 1 Stereo – Soundtrack 1/Stereo (default) 1 L – Soundtrack 1/Left channel 1 R – Soundtrack 1/Right channel 2 Stereo – Soundtrack 2/Stereo 2 L – Soundtrack 2/Left channel 2 R – Soundtrack 2/Right channel of just the currently selected playback/ recording device (HDD or removable disc).
DVRLX70_TF_EN.book 63 ページ 2007年8月1日 水曜日 Playback 午後4時14分 06 Tip • See Switching camera angles on page 62 for more on multi-angle scene switching. • When using the simultaneous play and record feature, the display shows information for playback only. • During real-time copy, the copy source playback information is displayed. • The Video mode DVD-R/-RW displays become the same as a DVD-Video disc once the disc is finalized.
DVRLX70_TF_EN.book 07 64 ページ 2007年8月1日 水曜日 午後4時14分 Playing and recording from a DV camcorder Chapter 7 Playing and recording from a DV camcorder You can play back and record video from a DV camcorder connected to the DV IN jack on the front panel of this recorder. Important • If you connect a second recorder using a DV cable, you cannot control the second unit from this one. • You can’t control this unit remotely from a component connected to the DV IN jack.
DVRLX70_TF_EN.book 65 ページ 2007年8月1日 水曜日 午後4時14分 Playing and recording from a DV camcorder 1 Make sure your DV camcorder is connected to the front panel DV IN jack. Also, set the camcorder to VTR mode. • REC MODE 2 Set the recording quality. • See Setting the picture quality/recording time on page 36 for detailed information. 3 From the Initial Setup menu, check that the DV audio input is setup as you would like. See DV Input on page 111 for more on this.
DVRLX70_TF_EN.book 07 66 ページ 2007年8月1日 水曜日 午後4時14分 Playing and recording from a DV camcorder • There’s a picture, but no sound! ENTER 5 Select ‘Record to Hard Disk Drive’ or ‘Record to DVD’. The DV tape is rewound to the beginning. Once it is rewound, the DV tape is played from the beginning and copied to either the HDD or a DVD. • If there is a gap of two minutes or more between recorded contents, the copying process is automatically stopped.
DVRLX70_TF_EN.book 67 ページ 2007年8月1日 水曜日 午後4時14分 Editing 08 Chapter 8 Editing Editing options The table below shows which commands you can use with the HDD and different disc types.
DVRLX70_TF_EN.book 08 68 ページ 2007年8月1日 水曜日 午後4時14分 Editing The Disc Navigator screen The Disc Navigator screen is where you can edit video content on unfinalized Video mode and DVD-R/-RW (VR mode) discs, DVD+R/ +RW and DVD-RAM, as well as video content on the hard disk drive. • Press to display the command menu panel. Use the / and ENTER buttons to navigate the menus. • PREV Important • Unless otherwise stated, the OSDs shown in this manual are for the Taiwan and Philippines model.
DVRLX70_TF_EN.book 69 ページ 2007年8月1日 水曜日 午後4時14分 Editing 08 preserved if you use high-speed copy to make a DVD-R/-RW (Video mode) or DVD+R/+RW. 1 to play. Highlight the title you want HDD genres The large capacity of the HDD means that there may be many hours of video in the recorder. To help you organize your HDD video content you can assign different genres to titles. There are 10 genres in total, including 10 user-definable ones that you can name as you like.
DVRLX70_TF_EN.book 08 70 ページ 2007年8月1日 水曜日 午後4時14分 Editing Tip • You can erase a title quickly by pressing CLEAR when the title is highlighted. Confirm the edit by pressing ENTER. Title Name DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM HDD You can give titles new names of up to 64 characters long for VR mode, DVD-RAM and HDD recordings, and up to 40 characters for Video mode recordings and DVD+R/+RW discs. 1 Highlight the title you want to name (or rename).
DVRLX70_TF_EN.book 71 ページ 2007年8月1日 水曜日 午後4時14分 Editing 08 Using the remote key shortcuts to input a name The table below shows the remote control key shortcuts that you can use to input characters in the name input screen. Pressing a button repeatedly cycles through the characters shown. If you want to enter two characters in succession that are both on the same button (for example a P and an R), press FWD SCAN to advance the cursor one space manually between inputting the two characters.
DVRLX70_TF_EN.book 08 72 ページ 2007年8月1日 水曜日 午後4時14分 Editing Set Thumbnail Erase Section HDD DVD (Video) DVD (VR) DVD+R DVD+RW DVD-RAM HDD DVD (VR) DVD-RAM You can change the thumbnail picture that appears in the Disc Navigator for a title to any frame that appears in that title. Using this command you can delete a part of a title, ideal for cutting out the commercial breaks in a recording made from the TV. 1 Highlight the title you want to change the thumbnail picture for.
DVRLX70_TF_EN.book 73 ページ 2007年8月1日 水曜日 午後4時14分 Editing 08 ENTER 5 Highlight ‘To’ then, in the same way, find the end of the section to erase, then press ENTER. After pressing ENTER, another marker indicates the end of the section, with the section itself marked in red. 4 Use the playback controls (, , , , etc.) to find the place you want to divide the title. Divide Title (HDD) 12/03 Sun 11:00 PM 4ch SP Rec. time 2h00m 10–1 00.00.09.
DVRLX70_TF_EN.book 08 74 ページ 2007年8月1日 水曜日 午後4時14分 Editing Move command only: Select the destination for the chapter, and press ENTER. ENTER 3 edit. HDD only: Select the type of Chapter Edit (DVD VR mode Play List) HDD/DVD RECORDER 12/03 Sun 11:00 PM 4ch SP Erase 1h00m Rec. time Move 0h01m Chapter Cancel Please select the type of editing. Video Mode Compatible Editing is recommended for compatibility with high-speed copying.
DVRLX70_TF_EN.book 75 ページ 2007年8月1日 水曜日 午後4時14分 Editing 08 ENTER ENTER 2 Select ‘Edit’ > ‘Set Genre’ from the command menu panel. Disc Navigator (HDD) 101 10Titles Disc Navigator (HDD) 101 12/03 11/29 SUN MON 11:00PM 7:00PM 4ch SP Play 12/03 Sun 11:00PM SP 11/29Mon 7:00PM 4ch 2ch SP Title Name Erase 2h00m(1.0G) 2h00m(1.0G) Set Thumbnail 4 Titles Chapter Edit 2h00m(1.0G) SetMulti-Mode Genre Recent first 8 Cancel Cancel 1h00m(1.
DVRLX70_TF_EN.book 08 76 ページ 2007年8月1日 水曜日 午後4時14分 Editing ENTER ENTER 3 title. Select a new position for the Title to move Disc Navigator (DVD) The screen below shows title 3 selected to be appended to title 1. 10Titles 11 12/03 11/29 SUN MON 11:00PM 7:00PM 4ch SP 12/03 Sun 11:00PM 11/29Mon 7:00PM 4ch 2ch SP SP 2 12/03 SUN 8:00PM 9ch SP 12/03 Sun 8:00PM 9ch SP 3 Select another title to combine with the first. This title will be appended to the first title selected. 2h00m(1.0G) 2h00m(1.
DVRLX70_TF_EN.book 77 ページ 2007年8月1日 水曜日 午後4時14分 Editing 08 Multi-Mode ENTER 2 Select one of the userdefinable genre names. Disc Navigator (HDD) 10Titles 101 12/03 SUN 11/29 MON 11:00PM 7:00PM 4ch SP Play 12/03 Sun 7:00PM 11:00PM 4ch Free1 11/29Mon 2ch SP SP 9 12/03 SUN 8:00PM 9ch SP Free4 12/03 Sun 8:00PM 9ch SP Erase Free2 2h00m(1.0G) 2h00m(1.0G) 4 Titles Free3 Edit HDD Multi-Mode allows you to select several titles, then select a command that will be applied to all of them.
DVRLX70_TF_EN.book 08 78 ページ 2007年8月1日 水曜日 Editing Undo DVD (Video) DVD (VR) DVD+R DVD+RW If you make a mistake while editing, you can generally undo it. There is one level of undo (in other words, you can only undo the last edit you made). ENTER • Select ‘Undo’ from the command menu panel. • You can’t undo anything after exiting the Disc Navigator screen. Disc Navigator (DVD) 1 0Titles 11/29 MON 7:00PM Play No title 11/29Mon 7:00PM 2ch SP 4 Titles Erase 2h00m(1.0G) 2h00m(1.
DVRLX70_TF_EN.book 79 ページ 2007年8月1日 水曜日 午後4時14分 Copying and backup 09 Chapter 9 Copying and backup Introduction Restrictions on copying Use the copying features of this recorder to: Commercial DVD-Video discs are protected using Copy Guard. These discs cannot be copied to the HDD. • Back up important recordings stored on the HDD to a DVD. • Make a DVD copy of a recording on the HDD to play in another player. • Transfer video from a DVD to the HDD for editing.
DVRLX70_TF_EN.book 09 80 ページ 2007年8月1日 Make sure that a recordable DVD disc is loaded when trying to copy from the HDD. REC MODE 1 If you’re copying from DVD to the HDD, select a recording mode. Note that selecting a recording mode higher than the title playing will not result in a better quality recording. ONE TOUCH COPY 2 Press during playback to copy the current title. The front panel display indicates that the title is being copied. • High-speed copying is used when copying from the HDD to DVD.
DVRLX70_TF_EN.book 81 ページ 2007年8月1日 水曜日 午後4時14分 Copying and backup • Thumbnail picture markers and chapter markers for the Disc Navigator are copied, but their position in the copy may be slightly changed from the original. • If some part of the title being copied is copy-protected, copying will start, but the copy-protected portions will not be copied. 09 • If you want to use a DVD-RW (VR mode) disc for the copy, make sure it is initialized before you start.
DVRLX70_TF_EN.book 09 82 ページ 2007年8月1日 • When adding titles that contain copyonce protected material, the copy-once parts will not be added. • When adding titles that contain material of more than one aspect ratio (screen size), each part with a different aspect ratio will be added as a separate title if high-speed copying is possible. Depending on the title1, high-speed copying may not be possible to DVDs. 6 Press to display the command menu panel.
DVRLX70_TF_EN.book 83 ページ 2007年8月1日 水曜日 午後4時14分 Copying and backup 09 • Set Thumbnail – Set the thumbnail frame for a title (see Set Thumbnail on page 72). • Recording Mode – Set the picture quality of the copy (see Recording Mode on page 84). • Dual Mono Audio/Bilingual – Set how dual mono/bilingual audio should be copied when copying from HDD to DVD-R/-RW (Video mode) and DVD+R/ +RW (see Dual Mono Audio/Bilingual on page 85). • Cancel – Exit the menu.
DVRLX70_TF_EN.book 84 ページ 2007年8月1日 水曜日 午後4時14分 Copying and backup 09 • It may not be possible to copy from a DVD disc that was recorded on a different DVD recorder or a PC. ENTER HOME MENU 1 Select ‘Copy’ from the Home Menu. ENTER Select ‘DVD/CD HDD’. 2 ENTER 3 Repeat this step for as many titles you have that need editing. Select a Copy List type. • Selecting Create New Copy List will erase any Copy List already stored in the recorder.
DVRLX70_TF_EN.book 85 ページ 2007年8月1日 水曜日 午後4時14分 Copying and backup • Optimized1,2 – The recording quality is automatically adjusted so that the Copy List fits on to the space available on the disc. Copying is carried out in real-time. When you change the recording mode setting, you can see how much disc space it will require. If this is more than is available, it shows up in red and you won’t be able to start copying.
DVRLX70_TF_EN.book 09 86 ページ 2007年8月1日 水曜日 午後4時14分 Copying and backup • You can cancel the backup process by pressing ONE TOUCH COPY for more than one second. 5 When the data has been copied, take out the disc and load a blank* recordable DVD. * If you’re using a DVD-RW or DVD+RW, the disc doesn’t have to be blank, although the previous contents of the disc will be erased in the backup process.
10 Jukebox.fm 87 ページ 2007年8月27日 月曜日 午後4時41分 Using the Jukebox 10 Chapter 10 Using the Jukebox The Jukebox feature allows you to use the recorder’s HDD to store and playback music from your CDs. You can also transfer WMA/ MP3 files stored on CD-R/-RW/-ROM, DVD, USB device or PC. 4 Display the command menu. The command menu panel Disc Navigator (DVD/CD) Track List Copying music to the HDD 10 Tracks 1 Track 01 Play 2 Track 02 CD The first step is to copy some music to the HDD.
DVRLX70_TF_EN.book 88 ページ 2007年8月1日 水曜日 午後4時14分 Using the Jukebox 10 Copying files via USB Connecting a regular USB device You can copy WMA or MP3 files from a connected USB device, such as a USB drive, to the HDD. 1 Connect the USB device. HOME MENU 2 Select ‘Jukebox’ from the Home Menu. ENTER 2 Load the next batch of up to 999 files/99 folders from the connected USB device. It takes several minutes to reload files.
DVRLX70_TF_EN.book 89 ページ 2007年8月1日 水曜日 午後4時14分 Using the Jukebox 10 *Depending on the Windows OS version and the Windows Media Player settings, the screen shown below may not be displayed. 6 Open Windows Media Player 11 on the PC. The device settings screen appears. Click ‘Cancel’. *Depending on the settings for Windows Media Player 11, the screen shown below may not be displayed. HOME MENU 2 Select ‘Jukebox’ from the Home Menu.
DVRLX70_TF_EN.book 10 90 ページ 2007年8月1日 水曜日 Using the Jukebox • Up to 50 000 tracks can be included in one album. (The total number of tracks allowed in Jukebox is 50 000.) Note that when there are many tracks contained in one album, it may take time to display and transfer these tracks. • Artists, albums and tracks with no set name that are transferred from CD/DVD/ USB are displayed as ‘Unknown Artist’, ‘Unknown Album’ and ‘Unknown File’ in Windows Media Player 11.
DVRLX70_TF_EN.book 91 ページ 2007年8月1日 水曜日 午後4時14分 Using the Jukebox 10 ENTER 3 Select the artist you want to play back. The screen below shows artists stored on the HDD: 6 Display the command menu.
DVRLX70_TF_EN.book 92 ページ 2007年8月1日 水曜日 午後4時14分 Using the Jukebox 10 Playing your favourite music (Play List) You can collect and play back only your favourite songs stored on the HDD. ENTER 3 Select a play list (‘Play List 1’ to ‘Play List 4’) you want to play back. Creating a play list 4 Display the command menu. ENTER 1 Select a track you want to add to a play list. 5 2 Changing the display style of the Jukebox Display the command menu. ENTER Select ‘Play’ from the menu.
DVRLX70_TF_EN.book 93 ページ 2007年8月1日 水曜日 午後4時14分 Using the Jukebox 10 Editing the HDD Jukebox • Play List Original – Displays the settings of Display Mode (By artist). Play List 1 to Play List 4 – Displays the tracks added to each play list. Favourites – Displays up to 25 tracks you listen to most frequently. A number of commands are available for editing and changing the playback behavior of albums. HOME MENU 1 Select ‘Jukebox’ from the Home Menu.
DVRLX70_TF_EN.book 11 94 ページ 2007年8月1日 水曜日 午後4時14分 The PhotoViewer Chapter 11 The PhotoViewer From the PhotoViewer you can view JPEG photos and picture files stored on the HDD, recordable DVD or CD-R/-RW/-ROM, or on a USB-equipped digital camera.1 You can also import files and save them to the recorder’s HDD or a DVD-R/-RW disc. Important • Unless otherwise stated, the OSDs shown in this manual are for the Taiwan and Philippines model.
DVRLX70_TF_EN.book 95 ページ 2007年8月1日 水曜日 午後4時14分 The PhotoViewer 11 • The larger the file size, the longer it takes the recorder to load the file. • You can change folders via the REV SCAN/ FWD SCAN buttons. • If you encounter a disc that will not play, check that the disc and file formats are compatible with this recorder (see JPEG file compatibility and PC-created disc compatibility on page 11). • The thumbnail of files that cannot be played is displayed as the logo.
DVRLX70_TF_EN.book 96 ページ 2007年8月1日 水曜日 午後4時14分 The PhotoViewer 11 STOP 4 Press to return to the thumbnail. • You can also use the RETURN button. HOME MENU 5 Press to exit the PhotoViewer. Zooming an image During a slideshow you can zoom in to enlarge a portion of the picture by a factor of two or four. You can also move the area of the picture displayed. ENTER 1 Press during the slideshow to zoom the picture. Repeated presses cycle between zoom off, 2x zoom and 4x zoom.
DVRLX70_TF_EN.book 97 ページ 2007年8月1日 水曜日 午後4時14分 The PhotoViewer 11 ENTER ENTER 4 Select ‘Yes’ to confirm and copy the folder(s)/file(s), or ‘No’ to cancel. • The files will be copied to the HDD with the same folder structure as the original. • Importing to the HDD will not work if there is insufficient space on the HDD, or if there are already the maximum number of files and/or folders on the HDD (999 folders/999 files per folder). 4 Select files/folders from the list.
DVRLX70_TF_EN.book 11 98 ページ 2007年8月1日 水曜日 午後4時14分 The PhotoViewer Important • Use a blank DVD-R/-RW disc, or one that has already been initialized for Video mode recording but has nothing yet recorded on it. Discs that have already been recorded on (as well as CD-R/-RW discs) cannot be used. • After backing up the pictures in your digital camera to DVD, we recommend verifying that they have been recorded properly before deleting anything from the camera.
DVRLX70_TF_EN.book 99 ページ 2007年8月1日 水曜日 午後4時14分 The PhotoViewer 11 Editing files on the HDD ENTER There are a number of commands you can use to edit and organize your pictures stored on the HDD. 3 Select ‘File Options’ or ‘Folder Options’. PhotoViewer HDD Folder2 Creating a new folder File 12 Files 1 From the folder list, display the menu. HDD Remain 100.0 G ENTER 2 Select ‘New Folder’. The folder appears at the bottom of the folder list with the name F_number. Remain 100.
DVRLX70_TF_EN.book 100 ページ 2007年8月1日 水曜日 午後4時14分 The PhotoViewer 11 ENTER ENTER 3 Select ‘File Options’ or ‘Folder Options’. 4 Select ‘Rename File’ or ‘Rename Folder’. PhotoViewer HDD ENTER Folder2 4 Select ‘Copy’ or ‘Copy Folder Contents’. File PhotoViewer HDD Folder2 File 12 Files HDD Remain 100.
DVRLX70_TF_EN.book 101 ページ 2007年8月1日 水曜日 午後4時14分 The PhotoViewer 11 ENTER 4 Select ‘Lock’ or ‘Lock Folder Contents’. 2 Display the command menu. ENTER 3 PhotoViewer HDD Folder2 File 12 Files HDD Remain 100.0 G 001 002 003 004 005 006 007 008 009 010 011 012 PIOR0000 PIOR0001 PIOR0002 PIOR0003 PIOR0004 PIOR0005 PIOR0006 PIOR0007 PIOR0008 PIOR0009 PIOR0010 PIOR0011 Select ‘Print’ from the menu.
DVRLX70_TF_EN.book 12 102 ページ 2007年8月1日 水曜日 午後4時14分 The Disc Setup menu Chapter 12 The Disc Setup menu From the Disc Setup menu you can name discs, lock the contents to prevent accidental recording and erasure, initialize and finalize discs. The Disc Setup menu is accessed from the Home menu. Basic settings Lock Disc DVD (VR) DVD-RAM • Default setting: Off Locking the disc will prevent accidental recording, editing or erasing of the disc.
DVRLX70_TF_EN.book 103 ページ 2007年8月1日 水曜日 午後4時14分 The Disc Setup menu Initialize settings DVD-R DVD-RW DVD+RW DVD-RAM You can initialize a recordable DVD-R/-RW disc for either VR mode or Video mode recording. The first time you load a new DVD-RW disc, it will be automatically initialized for recording according to the DVD-RW Auto Init. setting in the Disc Setup menu (see page 50).
DVRLX70_TF_EN.book 12 104 ページ 2007年8月1日 The Disc Setup menu HOME MENU 1 Select ‘Disc Setup’ from the Home Menu. ENTER 2 ‘Start’. Select ‘Optimize HDD’ then Disc Setup Basic Optimize HDD Start Initialize Finalize Optimize HDD A progress bar indicates how long there is left to go. If no actions are carried out for more than 20 minutes after the optimization process is completed, the unit turns itself off.
DVRLX70_TF_EN.book 105 ページ 2007年8月1日 水曜日 午後4時14分 The Video Adjust menu 13 Chapter 13 The Video Adjust menu Using the Video Adjust menu you can set up the picture quality for the built-in tuner and external inputs, for disc playback, and for recording. Setting the picture quality for TV and external inputs Picture Creation lets you choose a set of picture quality settings for the built-in TV tuner and for each external input.
DVRLX70_TF_EN.book 13 106 ページ 2007年8月1日 • Prog. Motion – Adjusts the motion and still picture quality when video output is set to progressive. • PureCinema – This setting optimizes the picture for film material when the video output is set to progressive. Usually set to Auto; but try switching to Off if the picture appears unnatural. • 3-D Y/C – Adjusts the brightness/colour separation. • YNR – Adjusts the amount of noise reduction (NR) applied to the Y (brightness) component.
DVRLX70_TF_EN.book 107 ページ 2007年8月1日 水曜日 午後4時14分 The Video Adjust menu 2 Move the cursor down and select ‘Detailed Settings’. Memory1 Detailed Settings 3 Select the picture quality setting you want to adjust. Memory1 Prog. Motion Motion PureCinma Still Auto1 On Subtitle Adjust YNR Off Max CNR Off Max BNR Off Max MNR Off Max You can adjust the following settings: • Prog. Motion – Adjusts the motion and still picture quality when video output is set to progressive. (Prog.
DVRLX70_TF_EN.book 14 108 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu Chapter 14 The Initial Setup menu Using the Initial Setup menu The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on. Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu. Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
DVRLX70_TF_EN.book 109 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu Setting 14 Options Explanation Auto Channel Setting (Taiwan and Philippines model) Antenna • Select if you receive channels from an antenna. It takes a few moments for the auto tuning to complete. Cable Select if you receive channels via cable. It takes a few moments for the auto tuning to complete.
DVRLX70_TF_EN.book 14 110 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu Setting Options Explanation Next Screen Proceed to the next screen to set the input colour system for the external input and the built-in TV tuner. Use the CH +/– buttons to change the preset. On the default Auto setting the recorder can generally correctly detect whether the input signal is PAL, SECAM, 3.58 NTSC or PAL-60, but in some cases you may have to set it manually if the picture is displayed incorrectly.
DVRLX70_TF_EN.book 111 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu 14 Setting Options Explanation Dual Mono Recording (Taiwan and Philippines model) L• Select to record the left channel of an external dual mono source when recording to DVD in Video mode, to HDD with HDD Recording Format set to Video Mode On, or in LPCM mode. R As above, but for right channel recording.
DVRLX70_TF_EN.book 14 112 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu Setting Options Explanation MPEG Out MPEG Output an MPEG audio signal when a source using MPEG audio is being played. MPEG PCM • Convert sources with MPEG audio to Linear PCM output. Use if your connected equipment doesn’t have an MPEG audio decoder. On Switches on Audio DRC (Dynamic Range Control). Use when listening to Dolby Digital material at low volume. Off • Switches off Audio DRC.
DVRLX70_TF_EN.book 113 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu 14 Setting Options Explanation Subtitle Language Chinese • (Taiwan and Philippines model) Sets the default subtitle language for DVD-Video playback to Chinese. English • (Other) Sets the default subtitle language for DVD-Video playback to English. available languages Choose from the languages displayed to set the default subtitle language for DVD-Video playback.
DVRLX70_TF_EN.book 14 114 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu Setting Options Explanation On (go to setup) All the standard recording modes, plus MN1 to MN32, LPCM and XP+ modes can be set. Off • Just the standard recording modes (XP, SP, LP, EP, SLP and SEP) can be set. Recording Manual Recording See also Manual recording modes on page 122 for detailed information on manual recording levels.
DVRLX70_TF_EN.book 115 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu 14 Setting Options Explanation HDD Recording Format Video Mode Off Recordings made to the HDD are made in VR mode. Use this setting if you don’t need to transfer the recording later to a DVD-R/-RW (Video mode) or DVD+R/+RW. Video Mode On • Recordings made to the HDD are compatible with Video mode recordings.
DVRLX70_TF_EN.book 14 116 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu Setting Options Explanation Parental Lock Set Password In order to change the parental lock level or change the country/area code, set the password using this option. From the following screen, enter a four-digit number that will be your password. Change Password In order to change the password, first enter your existing password and then a new one from the following screen.
DVRLX70_TF_EN.book 117 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu 14 Setting Options Explanation Colour RGB (0–255) Use if colours are weak and black appears to ‘float’ on the RGB (16–235) setting. RGB (16–235) Use this setting if colours appear overly rich and the black too deep on the RGB (0–255) setting. YCbCr 4:2:2 The video signal is output as a YCbCr 4:2:2 component signal. This is the standard setting for HDMI-compatible devices.
DVRLX70_TF_EN.book 14 118 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu Setting Options Explanation On • The recorder displays operation displays (Stop, Play, etc.) on-screen. Off Switches off the on-screen operation displays. Options On Screen Display Front Panel Display On • Off The time is shown in the front panel display when the recorder is in standby. The front panel display is switched off in standby.
DVRLX70_TF_EN.book 119 ページ 2007年8月1日 水曜日 午後4時14分 The Initial Setup menu Additional information about the TV system settings About the input line system This recorder is compatible with PAL, SECAM, 3.58 NTSC and PAL-60 TV systems. The Input Line System and Input Colour System settings determine how the recorder treats incoming video signals from an external input or the built-in TV tuner.
DVRLX70_TF_EN.book 14 120 ページ 2007年8月1日 The Initial Setup menu Selecting other languages for language options ENTER 1 Select ‘Other’ from the language list. This option appears in the settings for DVD Menu Language, Audio Language, and Subtitle Language. ENTER 2 want.
DVRLX70_TF_EN.book 121 ページ 2007年8月1日 水曜日 午後4時14分 Additional information 15 Chapter 15 Additional information Minimum copying times The table below shows the minimum HDD to DVD copying time for one hour of video. Please note that not all discs are compatible with high-speed copying.1 Check with the disc manufacturer for compatibility. Rec mode DVD disc type SEP SLP EP LP SP XP 10 h 8h 6h 4h 2h 1h DVD-R/1x DVD-RW/1x 1x 6 mins. 7.5 mins. 10 mins. 15 mins. 30 mins. 60 mins.
DVRLX70_TF_EN.book 122 ページ 2007年8月1日 水曜日 午後4時14分 Additional information 15 Manual recording modes The table below shows the approximate recording times for different DVD types in each manual recording mode, as well as the standard recording mode equivalents. For recording time on the HDD, see Specifications on page 137. Rec. time*1 Single-Layer DVD: DVD-R/-RW DVD+R/+RW DVD-RAM Level Dual-Layer DVD: DVD-R DL DVD+R DL MN 1 *3,4 802 mins. 1440 mins. MN 2 *3,4 720 mins. 1292 mins. SEP 600 mins.
DVRLX70_TF_EN.book 123 ページ 2007年8月1日 水曜日 午後4時14分 Additional information 15 • Levels separated by a bold line show where there is a noticeable change in picture quality. • Audio recording in all manual recording modes is in Dolby Digital 2 ch format, except for LPCM mode, which is in Linear PCM format. • See also Recording on page 32. Troubleshooting Incorrect operation is often mistaken for trouble and malfunction.
DVRLX70_TF_EN.book 15 124 En 124 ページ 2007年8月1日 水曜日 午後4時14分 Additional information Problem Remedy Remote control does not work • If you connected this recorder to another Pioneer product using the CONTROL IN jack, point the remote control at the other component to use (page 14). • Set the remote control to the same ID number as the recorder (page 118). (When the batteries run down, the remote mode is automatically reset to Recorder1.) • Use the remote within its operating range (page 6).
DVRLX70_TF_EN.book 125 ページ 2007年8月1日 水曜日 午後4時14分 Additional information Problem Remedy Can’t play a disc recorded using this recorder on another player • If the disc was recorded in DVD-R/-RW (Video mode) or DVD+R, make sure that it’s finalized (page 48). • Some players will not play recordable DVD discs, even when recorded in DVD-R/-RW (Video mode) or DVD+R and finalized. • If the disc was recorded in VR mode, the other player must be specifically RW compatible in order to play it (page 7).
DVRLX70_TF_EN.book 15 126 En 126 ページ 2007年8月1日 水曜日 午後4時14分 Additional information Problem Remedy After briefly unplugging or after a power failure the front panel display shows ‘--:--’ • A backup battery inside the recorder keeps the clock and other settings from being reset when there is no power to the recorder. After unplugging or a power failure, the battery keeps all settings for some five years from the date it was shipped from the factory.
DVRLX70_TF_EN.book 127 ページ 2007年8月1日 水曜日 午後4時14分 Additional information 15 HDMI Problem Remedy The connected HDMI or DVI device does not display any picture (and the front panel HDMI indicator does not light) • Try disconnecting then reconnecting the HDMI cable (while the power of both components is on). • Try switching the power of the HDMI/DVI device off then back on. • Try switching off the HDMI/DVI device and this recorder.
DVRLX70_TF_EN.book 15 128 ページ 2007年8月1日 水曜日 午後4時14分 Additional information Problem Remedy HDMI Control does not respond • Verify that the HDMI cable is firmly connected (page 21). • Check whether HDMI Control is set to On for this unit and the device connected to this unit. For more information, refer to the operating instructions of your plasma television or AV system. • Depending on the type of plasma television, some HDMI input terminals do not support the HDMI Control function.
DVRLX70_TF_EN.book 129 ページ 2007年8月1日 水曜日 午後4時14分 Additional information 15 On-screen displays The table below shows a list of error messages that you may encounter when using the recorder and an explanation of their meaning. Message Explanation/Action • Initializing disc. Please wait a moment. When you load a blank DVD-RW or DVD+RW disc, the recorder automatically initializes it. • Incompatible region number.
DVRLX70_TF_EN.book 15 130 En 130 ページ 2007年8月1日 水曜日 午後4時14分 Additional information Message Explanation/Action • Repairing disc. • Repairing the HDD. During recording, the power was cut. This display appears when the power is restored. • Could not repair the disc. The recorder was unable to repair the disc after a power cut. The contents of the recording will be lost. • Overheating has stopped operation. Press DISPLAY to clear message.
DVRLX70_TF_EN.book 131 ページ 2007年8月1日 水曜日 午後4時14分 Additional information 15 Message Explanation/Action • Could not operate the DV camcorder. This recorder was not able to operate the DV camcorder. • The DV camcorder is not set for playback. Please select playback mode on the DV camcorder. The camcorder is in camera mode. Switch it to playback mode. • The printer is not ready or is not connected. Please check the printer.
DVRLX70_TF_EN.book 15 132 ページ 2007年8月1日 Setting up the remote to control your TV Maker Code Alba 66 You can use the supplied remote to control your TV. To be able to use this feature you first have to program the remote with a maker code from the table below. Bush 76 Fisher 61, 65 Fujitsu 77 1 Press and hold down the CLEAR button, then enter the maker code for your TV. The LED indicator on the remote controls lights.
DVRLX70_TF_EN.
DVRLX70_TF_EN.book 15 134 ページ 2007年8月1日 水曜日 午後4時14分 Additional information Screen sizes and disc formats When viewing on a standard TV or monitor Screen format of disc Setting Appearance 16:9 4:3 (Letter Box) The programme is shown in widescreen with black bars at the top and bottom of the screen. 4:3 (Pan & Scan) The sides of the programme are cropped so that the picture fills the whole screen. 4:3 (Letter Box) 4:3 (Pan & Scan) The programme is presented correctly on either setting.
DVRLX70_TF_EN.book 135 ページ 2007年8月1日 水曜日 午後4時14分 Additional information 15 Handling discs Damaged discs When holding discs of any type, take care not to leave fingerprints, dirt or scratches on the disc surface. Hold the disc by its edge or by the center hole and edge. Discs spin at high speed inside the recorder. If you can see that a disc is cracked, chipped, warped, or otherwise damaged, don’t risk using it; you could end up damaging the recorder.
DVRLX70_TF_EN.book 15 136 ページ 2007年8月1日 Hints on installation Moving the recorder We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it: If you need to move the recorder, first remove the disc, if loaded, and close the disc tray. Next, press STANDBY/ON to switch the power to standby, checking that the POWER OFF indication in the display goes off. Wait at least two minutes. Lastly, disconnect the power cord.
DVRLX70_TF_EN.book 137 ページ 2007年8月1日 水曜日 午後4時14分 Additional information Specifications General Power requirements . . . . . . . . . . . . . . . . . . . . . 110 V to 240 V, 50 Hz/60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50 W Power consumption in standby mode (Front panel display: off) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.38 W Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVRLX70_TF_EN.book 15 138 ページ 2007年8月1日 水曜日 午後4時14分 Additional information Tuner Input/Output Receivable channels VHF/UHF antenna input/output terminal Taiwan and Philippines model . . . VHF/UHF set 75 Ω (F-shape connector) Other . . . . . . . . . VHF/UHF set 75 Ω (IEC connector) Video Input 1 (rear), 2 (front), 3 (rear) Input level . . . . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p (75 Ω) Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
00 Cover_back_TF.fm 1 ページ 2007年7月2日 月曜日 午後4時18分 HDD/DVD RECORDER Operating Instructions PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901, 905-479-4411 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.