User's Manual

Switching the muting/
attenuation timing
You can mute the AV source volume or attenu-
ate the output signal. This setting is invalid for
the mute signal has been received from the
MUTE lead connected to the navigation unit.
(Even if this setting is [Off], the navigation sys-
tem will mute or attenuate the audio source
volume when the signal is output via MUTE
lead.)
% Touch [Mute] on the “AV System Set-
tings” menu.
Each touch of [Mute] changes the settings as
follows:
! Guide/Tel/VR — The volume is muted or at-
tenuated according to the following condi-
tions
— When the navigation outputs the gui-
dance voice.
— When you use a cellular phone via Blue-
tooth technology (dialing, talking, in-
coming call).
— When the voice recognition mode is ac-
tivated.
! Tel/VR — The volume is muted or attenu-
ated according to the following conditions
— When you use a cellular phone via Blue-
tooth technology (dialing, talking, in-
coming call).
— When the voice recognition mode is ac-
tivated.
! Off — The volume does not change
p Operation returns to normal when the cor-
respond action is ended.
Switching the muting/
attenuation level
You can select the muting/attenuation level of
[Mute]. This setting is also effective for a mute
signal that has been received from the MUTE
lead connected to the navigation unit.
p This menu is not available in the following
cases:
— AV source is [Off]
— During muting/attenuation
% Touch [Mute Level] on the “AV System
Settings” menu.
Each touch of [Mute Level] changes the set-
tings as follows:
! ATT — The volume becomes 1/10
! 10dB — The volume becomes 1/3
! Mute — The volume becomes 0
p When you select [Mute], [Mute] is dis-
played and no audio adjustments are possi-
ble during the sound is turned off.
p When you select [ATT]or[10dB], no audio
adjustments, except volume control, are
possible during the sound is attenuated.
p Operation returns to normal when the cor-
respond action is ended.
p Even when a mute signal has been received
from MUTE lead connected to the naviga-
tion unit, navigation voice guidance cannot
be attenuated or muted.
Changing the voice output of
the navigation guidance
You can set the speaker to output the naviga-
tion guidance and phone voice, etc.
% Touch [Guidance/Tel SP] on the “AV Sys-
tem Settings” menu.
Each touch of [Guidance/Tel SP] changes the
settings as follows:
! L+R SP — Uses both the front right and left
speakers
! Left SP — Uses only the front left speaker
! Right SP — Uses only the front right speak-
er
Acquiring/Cataloging iPod
music information
If you always set the language other than “Eng-
lish” on “Program language”, this setting is
unnecessary.
Customizing preferences
En
161
Chapter
32
Customizing preferences