Owner's Manual

05Preparation
English
17
En
Power cord
Connecting the power cord
Connect the power cord after all component connections are completed.
Plasma Display (rear view)
• Use only the supplied power cord.
• Be sure to use the specified power supply voltage;
neglecting this can result in fire or electric shock.
•For the Plasma Display, a three-core power cord with a
ground terminal is used for efficiency protection.
Always connect the power cord to a three-pronged
outlet and make sure that the cord is properly grounded.
• Always turn off the power of the Plasma Display when connecting
the power cord.
• Disconnect the power cord from the power outlet when the Plasma
Display is not going to be used for a long period of time.
06-PDP5016HD-Eng (14-17) 4/7/06, 21:3517