User guide

Preparation

Installing the Plasma Display

Locating

• Avoid the direct sunlight. Keep enough ventilation.

• The length of the system cable used to connect the

Plasma Display and the Media Receiver is about 3

• Because the Plasma Display is heavy, be sure to

move it by more than two persons.

CAUTION >

• Do not place anything on the Media Receiver. Otherwise,

the Media Receiver does not receive enough ventilation,

and does not operate properly.

I NOTE >

• When installing, keep enough space around the upper

part and the back part, in order that ventilation around

back part is secured.

Using the optional PIONEER stand

• For details concerning installation, please refer to

the instruction manual provided with the stand.

Using the optional PIONEER speakers

• For details concerning installation, please refer to

the instruction manual provided with the speaker.

CAUTION >

* •

Operating Environment

Operating environment temperature and humidity: +0°C-

+ 40°C ( + 32F-+104F); less than 20-80%RH (cooling vents

not blocked)

Avoid installing in the following locations:

• Under direct exposure to sunlight,

• Under strong artificial light,

• In high humidity,

• Poorly ventilated.