Operation Manual

Controls and displays

13 u SOURCE

Press to turn on/off the power to the Pioneer device connected to the receiver.

14 Remote control LED

Lights when a command is sent from the remote control.

15 SUB ZONE CONTROL buttons

! Z2 (ZONE 2) – Holding down this button (for 1.5 seconds) until the remote control LED flashes one time, the

mode changes to Zone 2 operation.

! Z3 (ZONE 3) – Holding down this button (for 1.5 seconds) until the remote control LED flashes one time, the

mode changes to Zone 3 operation.

! HDZ (HDZONE) – Holding down this button (for 1.5 seconds) until the remote control LED flashes one time,

the mode changes to HDZONE operation.

16 VOLUME +/–

Use to set the listening volume.

To adjust the main zone sound volume, press MAIN RECEIVER first and then press this button. When in the sub

zone, press the SUB ZONE CONTROL button first and then press this button.

17 MUTE

Mutes the sound or restores the sound if it has been muted (adjusting the volume also restores the sound).

To mute the main zone sound volume, press MAIN RECEIVER first and then press this button. When in the sub

zone, press the SUB ZONE CONTROL button first and then press this button.

18 RCU SETUP

Used to set the remote control (page 98 ).