Operation Manual

20
Connecting your equipment
03
! Speaker System setting: 7.2.4ch SB Pre out, 7.2.4ch Front Pre out
— Speaker Setting TFw: Dolby Sp (Front) and TBw: Dolby Sp (Surr)
SBR
TBwL
TBwR
SBL
SRSL
SW2
C
SW1
TFwL TFwR
RL
— Speaker Setting TFw: Dolby Sp (Front) and TBw: Dolby Sp (SB)
SBR
TBwL TBwR
SBL
SRSL
SW2
C
SW1
TFwL
TFwR
R
L
Always use the top forward (TFwL/TFwR) and top backward (TBwL/TBwR) speakers as a combination. When you set
either of these speakers to NO in Speaker Setting, the other speaker will also be automatically set to NO.
Dolby Enabled Speaker
Dolby enabled speakers bring a new sense of height and immersion to the listening experience without installa-
tion of overhead speakers.
Ceiling
Listener
Dolby Enabled
Speaker
[C] 9.2.2 channel surround system (Top middle/Front height) connection
! Speaker System setting: 9.2.2ch TMd/FH
SBR
TMdL TMdR
SBL
SRSL
R
SW2
C
SW1
L
FHR
FHL
FWR
FWL
A 9.2.2 ch surround system connects the left and right front speakers (L/R), the center speaker (C), the left and
right top middle speakers (TMdL/TMdR), the left and right front height speakers (FHL/FHR), the left and right
front wide speakers (FWL/FWR), the left and right surround speakers (SL/SR), the left and right surround back
speakers (SBL/SBR), and the subwoofers (SW 1/SW 2).
It is not possible to produce sound simultaneously from the top middle speakers and the front height speakers.
The speakers from which sound is output can be switched using the OUT P. button. For details, see Switching
the speaker terminals on page 92 .
Front wide is output from the PRE OUT EXTRA 2 terminals of the receiver. Connect the EXTRA 2 terminal to the
external amplifier, and connect the external amplifier to the front wide speaker.
It is necessary to connect to any one of the top middle, front height, front wide, or surround back speakers to play
Dolby Atmos.
[D] 7.2.4 channel surround (Surround back Pre Out) connection
! Speaker System setting: 7.2.4ch SB Pre out
SRSL
TFwL
TBwL
TFwR
TBwR
R
SW2
C
SW1
L
SBRSBL
A 7.2.4 ch surround system connects the left and right front speakers (L/R), the center speaker (C), the left and right
top forward speakers (TFwL/TFwR), the left and right top backward speakers (TBwL/TBwR), the left and right sur-
round speakers (SL/SR), the left and right surround back speakers (SBL/SBR), and the subwoofers (SW 1/SW 2).
Surround back is output from the PRE OUT EXTRA 2 terminals of the receiver. Connect the EXTRA 2 terminal to
the external amplifier, and connect the external amplifier to the surround back speaker.
It is necessary to connect to any one of the top forward, top backward, or surround back speakers to play Dolby
Atmos.