Operation Manual

43
Connecting your equipment
03
Connecting external antennas
To improve FM reception, connect an external FM antenna to FM UNBAL 75 W.
ANTENNA
AM LOOP
FM UNBAL 75
FM UNBAL 75
2
ANTENNA
AM LOOP
HDMI OUT
75 Ω coaxial cable
To improve AM reception, connect a 5 m to 6 m length of vinyl-coated wire to the AM LOOP terminals without
disconnecting the supplied AM loop antenna.
For the best possible reception, suspend horizontally outdoors.
AM LOOP
FM UNBAL 75
ANTENNA
ANTENNA
AM LOOP
FM UNBAL 75
Outdoor antenna
Indoor antenna
(vinyl-coated wire)
5 m to 6 m
Making MULTI-ZONE connections
Equipment connected to this receiver in a different room (sub zone) from a room with this receiver (main zone)
can be played by operating this receiver (multi-zone function). Not only can the same source be played simultane-
ously in the main and sub zones, different sources can also be played.
By preparing a different amplifier with a HDMI input terminal in the sub zone, the other amplifier and TV monitor
can be connected to this receiver. When there is no other amplifier, the speaker terminal of this receiver can be
used. High resolution via HDMI can be enjoyed in the sub zone (HDZONE function).
Important
! The settings must be changed at ZONE Setup in order to use the multi-zone function (page 116 ).
! MAIN/HDZONE at ZONE Setup must be set to HDZONE in order to use the HDZONE function (page 116 ).
MULTI-ZONE listening options
The following table shows the signals that can be output to ZONE 2, ZONE 3 and HDZONE:
Sub Zone Input functions available
ZONE 2
<a>
SAT/CBL, DVR/BDR, INTERNET RADIO, Spotify, MEDIA SERVER, FAVORITES, iPod/
USB, USB-DAC (SC-LX89 only), TV, CD, TUNER, BT AUDIO
(Outputs analog audio)
ZONE 3
<a>
SAT/CBL, DVR/BDR, INTERNET RADIO, Spotify, MEDIA SERVER, FAVORITES, iPod/
USB, USB-DAC (SC-LX89 only), TV, CD, TUNER, BT AUDIO
(Outputs analog audio)
HDZONE
(HDMI)
<b>
BD, DVD, SAT/CBL, DVR/BDR, INTERNET RADIO, Spotify, MEDIA SERVER, FAVOR-
ITES, iPod/USB, USB-DAC (SC-LX89 only), HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5,
HDMI 6, HDMI 7/MHL, BT AUDIO
(Outputs HDMI audio and video signals)
a ! It is not possible to down-convert the audio input signal from the HDMI input terminals or digital input terminals (OPTICAL
and COAXIAL) and output them to ZONE 2.
! It is not possible to down-convert the audio input signal from the HDMI input terminals or digital input terminals (OPTICAL
and COAXIAL) and output them to ZONE 3.
b ! The inputs that can be switched differ according to how terminals HDMI IN 1 to IN 7 are assigned. Upon shipment from the
factory, the input terminals are assigned to DVD, SAT/CBL, DVR/BDR, HDMI 4, HDMI 5, HDMI 6 and HDMI 7/MHL, in order
starting from terminal HDMI IN 1.
! The video/audio signals of the RCA analog input terminals, the digital input terminals (OPTICAL and COAXIAL) and the COM-
PONENT VIDEO input terminals cannot be up-converted and output to the HDZONE.
! When any of the HDMI 3 to HDMI 7/MHL inputs is selected in the main zone, it is only possible to select the same input as in
the main zone for the HDZONE. (Inputs other than the ones listed here can be selected.)
The same limitations apply when one of the above inputs is selected for the HDZONE.
! SC-LX89 only: If you wish to select USB-DAC for HDZONE, set Speaker System to 7.2ch + HDZONE, 5.2 Bi-Amp+HDZONE,
or 5.2 +ZONE 2+HDZONE (page 112 ).
Notes
! When any of the INTERNET RADIO, Spotify, MEDIA SERVER, FAVORITES, iPod/USB or BT AUDIO inputs
is selected in the main zone, it is only possible to select the same input as in the main zone for the sub zone.
(Inputs other than the ones listed here can be selected.)
The same limitations apply when one of the above inputs is selected for the sub zone.
! SC-LX89 only: Any of INTERNET RADIO, Spotify, MEDIA SERVER, FAVORITES, iPod/USB or BT AUDIO and
USB-DAC cannot be selected for each sub zone at the same time.
! SC-LX89 only: When AirPlay or DMR, and USB-DAC are input, you cannot select for each sub zone at the same
time.