Operation Manual

46
Connecting your equipment
03
Connecting to the network through LAN interface
By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
NETWORK
HDMI OUT
NETWORK
WAN
321
LAN
Internet
Modem
Router
LAN cable (sold separately)
to LAN port
to LAN port
Computer
NAS
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see Setting network connection on page 53 .
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Notes
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.
Installing wireless antennas to this unit
When connecting to the network via wireless LAN, or when using the Bluetooth feature, install the supplied wire-
less antennas to the unit.
Important
! Do not connect any wireless antenna other than the supplied ones.
! Do not apply excessive force to the wireless antennas. It may result in damage.
! Before packing the unit, remove the wireless antennas from the unit to protect them from damage.
1 Attach the wireless antennas to the antenna terminals on the rear panel.
2 Rotate the wireless antennas until they are tightened securely.
3 Turn the wireless antennas upright.
WIRELESS
WIRE LESS
WIRELESS
WIRE LESS
123