Quick Start Guide

17
EN
Basic Operations
Basic Operation
2
Tap [Date & Time] and set the
date and the time.
Press and hold the [MENU] button
after you’ve completed your settings.
Time Zone Select a time zone.
Date Enter the date.
Time Enter the time.
24-Hour
Format
Check the box to display time
in 24 hour format.
Date
Format
Select the date format.
3
Tap [Close].
The Initial Setup is finished and
CycloMeter starts.
Pairing the Sensors
Pair the SGY-PM910H/PM900H
Pedaling Monitor Sensor or other ANT+
sensors to the device.
Before pairing the sensors
Make sure that the sensors that you •
want to pair are activated.
If more than one sensor is activated, •
bring the device close to the sensor
or specify the device number to pair.
Refer to the User’s Guide for
information about how to specify the
device number.
If you use the speed sensor •
sold separately and the wheel
circumference is different from the
default, set the wheel circumference.
The wheel circumference is set to
2096 mm by default. For details,
refer to the Users Guide.