Owner's Manual

13
EN
Basic Operations
Pair the SGY-PM900 Pedaling Monitor Sensor or other
ANT+ sensors to the device.
Before connecting the sensors
Make sure that the sensors that you want to pair are •
activated.
If more than one sensor is activated, bring the device close •
to the sensor or specify the device number to pair.
If you use the speed sensor sold separately and the wheel •
circumference is different, set the wheel circumference.
The wheel circumference is set to 2096 mm by default. For
details, refer to "Bike Edit" in "Cyclocomputer Settings" (
Ü
page 46).
1
Mount the sensors on your bike.
For details about how to mount sensors, refer to the
user’s manual of your sensors.
2
On the home screen, tap the [Sensors] icon.
3
Tap [Connect New].
This displays the sensor settings menu.
Pairing Sensors
4
Tap [Device Type] and then select the type of
sensor(s) you wish to pair.
Types of compatible sensors:
SpeedSensor•
CadenceSensor•
Speed & Cadence Sensor•
Heart Rate Monitor•
PowerMeter•
Pedaling Monitor L•
Pedaling Monitor R•
5
Tap [Search].
The message “Searching Please wait.” appears. If the
sensors are paired, the information from the sensors is
displayed.