Digital High Definition Tuner SH-DT510 Operating instructions 1
Safety First VENTILATION CAUTION When installing this unit, make sure to leave space around the unit for ventilation to improve heat radiation (at least 8 cm at top, 5 cm at rear, and 5 cm at each side). WARNING Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the product, and to protect it from overheating.
CAUTION The STANDBY/ON switch on this unit will not completely shut off all power from the AC outlet. Since the power cord serves as the main disconnect device for the unit, you will need to unplug it from the AC outlet to shut down all power. Therefore, make sure the unit has been installed so that the power cord can be easily unplugged from the AC outlet in case of an accident.
TABLE OF CONTENTS Safety First .............................................................................. 2 Chapter 1: Introduction ......................................................... 6 Summary of Features ........................................................................................ 6 Getting Started ................................................................................................... 7 Menu Tree .............................................................................
General Setting ............................................................................... 20 TIME SETUP ...................................................................................................... 20 AUDIO SETUP .................................................................................................... 20 i - PLATE SETUP ............................................................................................... 21 SOFTWARE ........................................................
Chapter 1: Introduction Digital High Definition Tuner's Functions The SH-DT510 digital High Definition tuner opens up a new world of free-toair terrestrial programming. This tuner can receive channels from VHF/UHF band TV station's digital signals. All the major terrestrial free-to-air digital station numbers currently available in your area are listed in the onscreen menu. To access the high quality digital programs, simply select the channel number on your remote control.
System Menus All the tuner's features can be accessed through the system menus. These menus can be accessed with simple point and click actions, using the navigation and select buttons on the RCU. The menus include items such as Transmission Parameter Configuration, Channel List, Audio Options, and Parental Lock. For more information on using the menu system, refer to the simple "Menu Tree" described later in this chapter, or refer to the more detailed menu descriptions in Chapters 3 and 4.
Menu Tree Note: You need to enter a " Password " to access some of the functionality in the menu. Password is initially set to "0000". For more information, please refer Chapter 4 "CHANGE PASSWORD".
Chapter 2: Installation Introduction If your service provider or system installer has already set up the antenna and connected the tuner, then you can start the operations specified in Chapter 4. However, if you are setting up the system by yourself, please read through this section and be sure you follow all of the precautions listed under "Safety First". Package Contents Unpack the tuner and check that all of the items listed below are included.
Functions Of RCU Buttons The buttons on the remote control are described as follows: • STANDBY/ON: Switches the tuner between ON and STANDBY modes. • Numeric Buttons: For entering channel number or password. • INFO: Displays i-Plate providing information about the current channel. • MENU: Activates the On-Screen Menu. • FAV.: Selects the Favorite channel list. • Direction buttons: Move through menus or submenus. • ENTER: Displays channel list or enters highlighted menu feature.
Front Panel The buttons and indicators on the Front Panel of your SH-DT510 are described in the following picture and table: Standby / On LED Display DIGITAL HIGH DEFINITION TUNER SH-DT510 STANDBY/ON MENU/ ENTER RETURN LED Indicators Rear Panel The rear panel carries connectors for attaching VHF/UHF antenna and other home entertainment equipment. To ensure highest quality video output, it is recommended to use (in order of preference) HDMI, Component Video, S-Video, Composite Video.
Terminals Description S-Video Out Connects to the S-Video input on your TV or VCR. Data Port For service use only. RF In Connects the VHF/UHF antenna. This connector accepts input signals ranging from 51 to 858 MHz. Composite Video Out Connects to the video input on your TV, VCR or DVR. Audio Out (L, R) Connects to the audio input on your TV, VCR, DVR or stereo system. RF Out Connects to TV or VCR RF input (for video and mono audio signals).
Sample Configurations HDMI Connection VHF/UHF Antenna RF IN VIDEO Y COAXIAL L OPTICAL R PB AC IN PR RF OUT S- VIDEO ANT COMPONENT VIDEO VIDEO OUT HDMI OUT AUDIO OUT SERVICE ONLY HDMI AC Power High Definition TV(Y/Pb/Pr) Connection VHF/UHF Antenna RF IN VIDEO Y COAXIAL L OPTICAL R PB AC IN PR RF OUT S- VIDEO ANT COMPONENT VIDEO VIDEO OUT HDMI OUT Video AUDIO OUT SERVICE ONLY Audio AC Power 13
S-Video Connection VHF/UHF Antenna RF IN VIDEO Y COAXIAL L OPTICAL R PB AC IN PR RF OUT S- VIDEO ANT COMPONENT VIDEO VIDEO OUT HDMI OUT AUDIO OUT S-Video AC Power SERVICE ONLY Audio Note: Connecting video through S-Video, OSD can not work under 1080i / 720p and 576p modes. Please connect your TV to Y/Pb/Pr or HDMI output for OSD properly displaying under 1080i / 720p & 576p modes.
Antenna Loop Connection Using RF Output to connect with VCR or Secondary TV The RF OUT only support signal loop-thru but not the re-modulation for the received program.
Chapter 3: Channel Setting Introduction After finishing the hardware installation as described in Chapter 2, switch on the tuner. It will display Data base is Empty and instruct you to press the "MENU" button on the remote control. The following menu will be displayed after pressing the "MENU" button.
INSTALLATION • INSTALLATION MENU gives 4 different sub-menu. QUICK SCAN AUTO SCAN MANUAL SCAN CLEAR ALL DATA QUICK SCAN If you live in one of the cities or regions listed in the QUICK SCAN menu, select your city or region and start scanning all digital TV channel signals . • On the user installation page, select QUICK SCAN. • Scroll up or down the list to find the city or region that you live in and press "ENTER" button to start scanning. • The tuner will scan through the channels available in your area.
AUTO SCAN Auto Scan searches for digital programs on all channels, 5 to 69, through the VHF and UHF bands. • Select AUTO SCAN and press "ENTER" button. • Select YES then press "ENTER" button to start channel search. • The tuner starts scanning from channel 5 to channel 69. The percentage bar shows the progress made. • Once the digital TV signal is scanned, the channel number and program name will be shown on the Program List above the percentage bar.
MANUAL SCAN Manual Scan search the channel based on user request frequency and bandwidth. • On the Installation page, select MANUAL SCAN and press "ENTER" button. • Select channel number. Be sure you know the channel number and its RF frequency. • Check FREQUENCY, BANDWIDTH and PRIORITY to ensure that these parameters are correct, then highlight Start Scan and press "ENTER" button to start the scan.
General Setting • Selecting SET UP will display this sub-menu. TIME SETUP AUDIO SETUP i - PLATE SETUP SOFTWARE TIME SETUP • TIME SETUP sets the time in "TIME ZONE". Use the " "and " " buttons to select the local time zone you are located in and press the "ENTER" button. Note : A correct time zone setting can help box to display the correct time in the i-PLATE.
i - PLATE SETUP • On selecting this option from the above menu, you can change the i-PLATE display time and format.
SOFTWARE • When you select the SOFTWARE menu, there are two sub-menus displayed: CURRENT VERSION INSTALL NEW S/W CURRENT VERSION • Under the CURRENT VERSION submenu, the ID number of installed hardware and software versions of the tuner are displayed.
Chapter 4: Using the Tuner Introduction Once the channels are downloaded, you can start enjoying the full range of video and audio programs. Operating the tuner is extremely easy. You can control the show tuner directly from the Front Panel or with the RCU as described below. The tuner's menu provides access to a listing of all the channels configured on your tuner and parental controls that allow you to access or restrict sensitive programming, as well as the various audio options.
Selecting Favorite Channels • Under the "CH SETUP" sub-menu, you can select "SELECT FAVORITE" to set up favorite channels. • Use " " and " " buttons to select the channel, use " " and " " buttons to select "FAV.1" or "FAV.2" • When you highlight "FAV.", the direction icon will show. • After you have made all the selections, press "ENTER" button to register them. Favorite Channel List • When you are watching Broadcasting, you can press the "FAV." button on the remote control to call up the Favorite List.
PARENTAL GUIDANCE • Under CH SETUP sub-menu, you can select PARENTAL GUIDANCE to block programs. • Use " " and " " buttons to select the Rating, press "ENTER" button to confirm the setting. • When DTV programs broadcasted are accompanied by the ratings, the programs will be blocked based on your setting, then you have to enter PASSWORD to resume watching the program. Pass word is set to "0000" at factory initial setting. CHANGE PASSWORD • You can change the password by selecting the CHANGE PASSWORD.
i-PLATE (INFORMATION PLATE) • While watching DTV you can press the "INFO" button to activate extended program information. • The i-PLATE will pop up with the following information, - Current Channel Number - Network Name - Program Name - Audio Output (PCM or Dolby Digital) - Digital / Analog TV signal - Teletext - Current Local Time - Date and Month • While the i-PLATE is still on the screen, you can press "INFO" button again to call up the extended program information of the current TV channel (NOW) .
TELETEXT / Closed Caption • When the i-PLATE indicated that Teletext / Closed Caption data is available on the current channel, you can press the " TTX " button on the remote control to display it on the TV screen. • 4 Colour buttons are assigned for TTX. You can select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding colour.
SLEEP When the selected time elapses, the Sleep Timer automatically places the system into the standby mode. Press "SLEEP" button to select the desired time. • The timer starts counting. • To cancel the Sleep Timer, select "OFF" by pressing "SLEEP" button. • Each time you press "SLEEP" button the selection is switched as below: • The factory default is "OFF".
Appendix A: Interference with The HDTV Tuner Weather Induced Signal Fading Natural calamities may affect signal reception. If the terrestrial TV programming is often affected by inclement weather conditions, there are a few basic steps you can take to improve reception: 1. Make sure your antenna is aimed to receive the strongest possible signal. 2. If this does not solve the problem, consider installing a larger antenna with higher gain. This can help to gather more signal transmitted from the TV station.
Appendix B: Troubleshooting If you encounter any problems with the tuner, look through this section for a description of your problem. Try solving the problem by following the given solutions. However, if after attempting all the recommended actions you still cannot solve the problem, please contact PIONEER SERVICE AND PARTS CENTER. If the unit does not operate normally due to external effects, disconnect the power plug from the outlet for 1 minute and insert again to return to normal operating conditions.
Problem (5) No video service. (6) Does not have all the channels available after activating “AUTO SCAN” when first time installing the receiver. (7) Does not have all the channels available after using “QUICK SCAN”. (8) Cannot lock signal by using “MANUAL SCAN”. (9) No Teletext. (10) Cannot receive channels after moving the tuner between cities. (for instance from Melbourne to Sydney) Solution (a) Scan this channel again by using "MANUAL SETUP" and see if the video service will come back.
Appendix C: DTV CHANNEL TABLE The following is a list of DVT channels available in Australia. First, into "MANUAL SETUP" Second, select the VHF channel number, then use a middle frequency to start search. (For instance, if you are in Sydney and want to scan Digital 7, First, into MANUAL SETUP select Channel 6 and make sure the Frequency is177500 kHz, then start scanning) City Channel & Middle Frequency Digital 7 VHF 6 - 177.5MHz Digital 9 VHF 8 - 191.625MHz Digital 10 VHF 11 - 219.
City Identifier Canberra CTC -7 ABC -9 WIN -31 CBN -34 SBS -28 SBS -28 ABD -6 NTD -8 TND -34 Darwin Newcastle NBN -3 NEN -54 NRN -57 ABHN -5A/ 4B Wollongong SBS -45 WIN -59 CTC -62 CBN -65 ABWN -56 SBS -53 Hobart WIM-7 ABC-8 SBS-9A Southern Hobart NE Cross -10 Digital 10 ABC -56 Southern Cross -62 SBS -64 WIN -65 Digital 10 Channel & Middle Frequency VHF 6 - 177.5MHz VHF 9A - 205.5MHz VHF 11 - 219.5MHz VHF 12 -226.5MHz UHF 30 -543.5MHz UHF 29 - 536.625MHz UHF 30 - 543.5MHz UHF 31 - 550.
Appendix D: Specifications Standards Compliance Compliant Standard DVB-T, MPEG-2 RF Input/Output Frequency Loop Through Bandwidth Connector Demodulator FFT Mode Constellation Guard Interval Inner Coding Rate Australian Allocation ; VHF(104.5 ~ 226.5MHz) UHF(526.5 ~ 816.
Front Panel Function Control Channel Display 7 Buttons 4 Digits / 7-segment display Remote Control Buttons 35 Buttons including Standby, CH+, CH–....etc Power Supply Input Voltage Power Consumption 240V ~ 50 Hz 18W (3W standby) Dimension Size Weight (W × D × H) 360 × 268 × 80 mm 3.
Glossary * Aspect Ratio : It is the ratio of the width of the screen to the height. The two relevant digital TV formats are 16:9 (widescreen) or 4:3 (the traditional screen ratio). 16:9 is more ergonomically suitable for the human eye. * Bandwidth : Frequency range allows for carrying a certain radio signal. The speed of data transmission depends on the available bandwidth of the transmission channel. * Coaxial Cable : A type of cable used to transmit high frequency signals e.g.
* Megahertz (MHz) : Millions of cycles per second, which describes frequencies of radio wave or electric current. * OSD: Abbreviation of "On Screen Display", used in digital set top box. OSD is comprised of a main menu and many submenu with lots of options of functions inside. * PAL : Stands for "Phase Alternating Line", the European video standard which has the image format of 4 by 3,625 horizontal lines, 50 Hz and a total 8 MHz of video channel width. * PID : Stands for "Packet Identifier".
AFTER-SALES SERVICE FOR PIONEER PRODUCTS PIONEER ELECTRONICS AUSTRALIA PTY. LTD PIONEER SERVICE AND PARTS CENTER 2211 PRINCES HIGHWAY MULGRAVE, VICTORIA 3170 PHONE:1800-988-268 Published by Pioneer Corporation. Copyright © 2005 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90810-1540, U.S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANADA, INC.