Operation Manual

28
03
Connecting your equipment
Basic MULTI-ZONE setup (ZONE 2)
1 Connect a separate amplifier to the AUDIO ZONE 2 OUT jacks on this receiver.
You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
2 VSX-1122 only: Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
AUDIO
DVD
IN
DVR/BDR
IN
ZONE 2
OUT
R
L
ZONE 2
OUT
AUDIO
DVD
IN
DVR/BDR
IN
ZONE 2
OUT
R
L
ZONE 2
OUT
RL
AUDIO IN
Sub zone (ZONE 2)
VSX-1122 only
Main zone
VIDEO IN
MULTI-ZONE setup using speaker terminals (ZONE 2)
You must select ZONE 2 in Speaker system setting (page 79) to use this setup.
1 Connect a pair of speakers to the surround back speaker terminals.
You should have a pair of speakers attached to the surround back speaker terminals as shown below.
2 VSX-1122 only: Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver.
RL
Sub zone (ZONE 2) Main zone
SURROUND BACK / ZONE 2
RL
(
Single
)
SURROUND BACK / ZONE 2
RL
(
Single
)
ZONE 2
OUT
ZONE 2
OUT
VSX-1122 only
VIDEO IN
Connecting to the network through LAN interface
By connecting this receiver to the network via the LAN terminal, you can listen to Internet radio stations. To listen
to Internet radio stations, you must sign a contract with an ISP (Internet Service Provider) beforehand.
When connected in this way, you can play audio files stored on the components on the local network, including
your computer.
LAN
(
10/100
)
LAN
(
10/100
)
WAN
321
LAN
Internet
Modem
Router
LAN cable (sold separately)
to LAN port
to LAN port
PC
NAS
Connect the LAN terminal on this receiver to the LAN terminal on your router (with or without the built-in DHCP
server function) with a straight LAN cable (CAT 5 or higher).
Turn on the DHCP server function of your router. In case your router does not have the built-in DHCP server func-
tion, it is necessary to set up the network manually. For details, see Network Setup menu on page 81.
LAN terminal specifications
! LAN terminal : Ethernet jack (10BASE-T/100BASE-TX)
Note
! Refer to the operation manual of the equipment you have as the connected equipment and connection method
may differ depending on your Internet environment.
! When using a broadband Internet connection, a contract with an Internet service provider is required. For
more details, contact your nearest Internet service provider.