Operation Manual

27
Using the tuner
13
8
8
Listening to the DAB (X-HM72D, X-HM82D and
XC-HM82D only)
DAB (Digital Audio Broadcasting) is a digital transmission
system where audio signals are converted to digital signals for
broadcasting.
DAB broadcasts a group of data called multiplex (ensemble)
which may contain one or more stations (services). Each
station contains a primary service and there may be one or
more secondary services.
This allows several programs or services to be transmitted on
a single frequency.
Selecting DAB
1
Turn on the receiver.
Refer to Setting the receiver on page 12 for details.
2
Press the TUNER button on the remote control to select
the TUNER input.
You can also select the TUNER input by pressing the
INPUT button on the remote control repeatedly.
3
Press the BAND button repeatedly to select "DAB".
Using the auto scan function manually
Using DAB for the very first time
The very first time you use DAB, press the DAB SCAN button
to run the Auto Scan.
If a new DAB station is introduced, or you move to a new area,
you can run the Auto Scan function again.
1
Select DAB.
See Selecting DAB above for more on this.
2
Press the DAB SCAN button.
Selecting DAB stations
1
Select DAB.
See Selecting DAB above for more on this.
2
Press the TUNE / button to select a DAB service.
3
Press the ENTER button to listen to the service.
The station is tuned.
While the primary service is selected, brackets < > are
displayed. While the secondary service is selected,
brackets ( ) are displayed.
If you select a station that cannot be received properly,
“DAB No Tuned” is displayed.
DAB SIGNAL
SERVICES
MULTIPLEX
(ENSEMBLE)
SERVICES
COMPONENTS
(STATIONS)
TREBLE
BASSCD DISP
BAND
TUNER
AUDIO IN DIG IN LINE 1/2
VOLUME
RETURN
MUTE
RDS DISPDAB SCAN
SETUP
iPod
CONTROL
TOP
MENU
T
U
N
E
P
R
E
S
E
T
P
R
E
S
E
T
T
U
N
E
ENTER
PTY
Tuner DAB
News
BBC
DAB
Scanning...
BBC
<BBC5Live>
BBC
(BBC5Live)
DAB No TunedDAB No Tuned