Operation Manual

9
9
30
Network quick setup guide
Connection method 1 | Connect a LAN cable
1
Connect the receiver and the router using a LAN cable.
2
Press the STANDBY/ON button.
The power to the receiver will be turned on.
3
Press the NET SERVICE button, and select Internet Radio.
Confirm that the cabled LAN operation mark is displayed.
Note
• If the cabled LAN operation mark is not shown, check that the LAN cable is firmly inserted
into both this receiver and the router.
• This receiver is shipped with DHCP settings turned “On”. If your router does not support
DHCP, please perform the settings manually. (A: Wired setting
on page 42)
• If “Empty” is displayed, there is a possibility that the router is not connected to the internet.
Check whether other connected devices, such as a computer, are able to use the internet. If
not, connect the router to the internet. Refer to the router’s user manual for details on how
to do so.
ANTENNA
AL
LAN (10/100)
WLAN
ANTENNA
WAN
321
LAN
Internet
Router
Computer
This receiver’s rear
panel
LAN cable
(commercially
available)
Modem
STANDBY/ON
OPEN/CLOSE
SLEEP
TIMERDIMMER
SOUND
iPod/USB
CD
BT AUDIO
INPUT
Genres
Podcasts By Genre
Podcasts By Location
Countries
Internet Radio
Top Menu