Operation Manual

9
9
38
Network quick setup guide
5
Tap (touch) AirPlay.
6
Once the name of this receiver is displayed, select it.
Note
• The displayed name will change depending on the product
being used.
XC-HM72 *****, XC-HM82 *****, XC-HM72D ***** or XC-
HM82D ***** will be displayed. (“*****” is the lower three
bytes of the MAC address.)
7
Select a track and play it.
Swipe (slide) and hide display of the Control Center.
Playback will begin through this receiver.
Note
• If an AirPlay password has been set, you may be required to
input the password when starting AirPlay.
You may set an AirPlay password in the following ways.
- Wireless Accessory Configuration (page 43)
- AirPlay password on the Network Setting screen
- AirPlay password on the Web Control screen
Listen to music on a computer or NAS
(network attached storage).
1
Press the STANDBY/ON button.
The power to the receiver will be turned on.
2
Connect a NAS that supports DLNA or a computer with
Windows Media Player 12 installed to the same router
as this receiver.
HM82
*****
HM82
*****
3
STANDBY/ON
OPEN/CLOSE
SLEEP
TIMERDIMMER
SOUND
iPod/USB
CD
BT AUDIO
INPUT
PHONES 5 V 2.1 A AUDIO IN
ON TIMER
WAN
321
LAN
Internet
Wireless LAN
router
Computer
Modem
iPhone
NAS
LAN cable
(commercially
available)