Full Product Manual
ENGLISH
ENGLISH
GAS HOOK-UP
Only the pressure regulator and hose assembly supplied with the grill should be
used. Any replacement pressure regulator and hose assembly must be specified
by the grill manufacturer. This grill is configured for Liquid Propane. Do not use a
Natural Gas supply.
Total gas consumption (per hour) with all burners set on "HI":
Main burners 20,000 BTU/Hr.
Total 20,000 BTU/Hr.
The installation of this appliance must conform with local codes or, in the absence
of local codes, with either the National Fuel Gas Code, ANSI Z223. 1/NFPA 54, National
Gas Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code,
B149.2.
LIQUID PROPANE CYLINDER REQUIREMENTS (20 lb Cylinder)
A dented or rusty Liquid Propane cylinder may be hazardous and should be checked
by your supplier. Never use a cylinder with a damaged valve. The Liquid Propane
cylinder must be constructed and marked in accordance with specifications for
Liquid Propane cylinders by the United States Department of Transportation (DOT)
or the National Standard of Canada, CAN/CSA-b339, Cylinders, Spheres and Tubes for
Transportation of Dangerous Goods Commission.
The 20-lb cylinder must have a shut off valve terminating in a valve outlet specified,
as applicable, for connection type QCC1 in the standard for compressed gas cylinder
valve outlet and inlet connection ANSI/CGA-V-1.
Storing your portable gas grill indoors is permissible only if the cylinder is
disconnected and removed from the outdoor cooking gas appliance. The cylinder
system must be arranged for vapor withdrawal. The cylinder must include a collar to
protect the cylinder valve.
Manifold pressure: (operating) 11 inches water column (W.C.), (Non-operating) 11.2
inches water column (W.C.).
The Liquid Propane cylinder must be fitted with an Overfill Protection Device (OPD).
Remove plastic valve cover from the Liquid Propane cylinder.
Make sure the grill gas hoses do not contact the grease pan or grill
firebox when the Liquid Propane cylinder is placed into the cart.
10
11
CONNECTING THE LIQUID PROPANE CYLINDER
To connect the Liquid Propane gas supply cylinder:
• The cylinder valve should be in the "OFF" position. If not, turn the valve
clockwise until it stops.
• Make sure the cylinder valve has the proper type-1 external male thread
connections per ANSI z21.81.
• Make sure the burner valves are in the "OFF" position.
• Inspect the valve connections, port and regulator assembly. Remove debris and
inspect the hose for damage.
• When connecting the regulator assembly to the valve, use your hand to tighten
the nut clockwise until it stops. Use of a wrench could damage the quick
coupling nut and result in a hazardous situation.
• Before lighting the grill, use a soap and water solution to check all the
connections for leaks.
• If a leak is found, turn the cylinder valve "OFF" and do not use the grill until a
local Liquid Propane dealer can make repairs.
DISCONNECTING THE LIQUID PROPANE CYLINDER
• Turn the grill burner valves "OFF" and make sure the grill is cool.
• Turn the Liquid Propane cylinder valve "OFF" by turning clockwise until it stops.
• Detach the regulator assembly from the cylinder valve by turning the quick
coupling nut counterclockwise.
• Place dust cap on cylinder valve outlet whenever the cylinder is not in use.
Only install the type of dust cap on the cylinder valve outlet that is provided
with the cylinder valve. Other types of caps or plugs may result in leakage of
propane.