User Manual

Foreword
Dear customer,
Congratulations on the purchase of your PITT
®
cooking gas hob. This unique system gives you the opportunity to
determine the location of each burner which means you are guaranteed to cook with pleasure for many years. Thanks to
the various burner capacities you can properly prepare each dish and the integrated spark ignition in the controls ensures
that the burners can be handled with one hand. This manual describes how to take full advantage of all the features of
this gas hob.
We recommend you read the user manual and mounting instructions carefully before you use the gas hob.
Do not throw this manual away, so that any following user also benefits from it.
Happy Cooking!
PITT
®
cooking
Content
Chapter Subject Page
1 Installation dimensions 15
2 Connection: gas and electrical 16
3 General instructions 17
4 Control PITT
®
cooking 18
5 Optimal use of the PITT
®
cooking system 18
6 Maintenance of the PITT
®
cooking system 19
7 Failures in the PITT
®
cooking system 20
8 Models overview Top Side 21
9 Models overview Front Side 23
10 Packaging 24
11 Service addresses 76
1 Installation dimensions
• A cooking module cannot be installed over a partition of cabinets. It has to be accessible in case it needs servicing.
• When PITT
®
cooking is combined with a drawer cabinet, always be aware of the measurements of the unit and the support
bar. The height of the unit and the support bar is 115 mm (Top Side) and 170 mm (Front Side) measured from the top of
the worktop (fig.2).
• To prevent bending of the worktop the appliance need to be supported by two PITT
®
cooking support bars
(fig. 2 and 4).
Type sticker
15
Top Side (TS) measure in mm
Support bar
afb. 2
fig. 4
Min. 47
Min.
150
Min. 50
Min. 600
Min. 4
Max. 35
fig. 1
Support Bar
88mm TS
140 mm FS
115mm TS
170 mm FS
Min.
450
Min.
650
fig. 2
Support bar
Front Side (FS) measure in mm
fig. 3
Min.
150
75 mm
Min. 650
Min. 4
Max. 25
Min. 47
EN EN
14