User Manual

LED Lighting Kit Installation Instructions

Note: For those individuals that are not technically inclined, we would strongly recommend that

you bring your vehicle to your local mechanic or installer and have them install the part or parts

for you. Pivotal Powersports Corp. is not responsible for the installation of any of our products.

Tools that will assist you in installing your new LED Lighting Kit…

Diagonal cutters for cutting wire, zip ties, etc. Wire strippers/ crimper for stripping wire and/ or

crimping crimp connectors. Wrench/ adjustable wrench for removing panels and/ or loosening

battery terminals. Screwdriver for removing panels and/ or loosening battery terminals. Allen

wrenches for removing panels or fairings.

A soldering iron is another great tool to have handy when

installing the LED lighting kit. You can solder the wires to the

terminals on the switch, or use it to connect the LED light pods to

the power wire. The soldering iron is not required for installation

though.

Some other items that will aid in the installation are zip ties, for

securing loose wires, crimp on spade terminals, for connecting

the wires to the switch, and a roll of electrical tape, for covering

any exposed wires or termin

als.

ons.

nected.

Installation Instructions

Disconnect the vehicle’s battery and remove any body work that will have the LED light

pods located behind them. Using the supplied alcohol cleaning wipes thoroughly clean

the back of the LED pods and the areas where the lights will be mounted.

Firmly adhere the double sided tape to the

back of the LED light pods. Carefully mount the

LED light pods loosely in the desired locati

Run the power wire from the battery to the

furthest LED light pod. Using the red crimp

connectors, connect the LED light pods to the

power wire as shown in the diagram to the

left. Connect the power (Red) and ground

(Black) wires from the LED light pods to th

power (Red) and ground (Black) of the main

power wire. Continue running the main pow

wire from LED light pod to LED light pod until

all the lights are con

PAGE 1
LED Lighting Kit Installation Instructions Note: For those individuals that are not technically inclined, we would strongly recommend that you bring your vehicle to your local mechanic or installer and have them install the part or parts for you. Pivotal Powersports Corp. is not responsible for the installation of any of our products. Tools that will assist you in installing your new LED Lighting Kit… Diagonal cutters for cutting wire, zip ties, etc.
PAGE 2
Mount the switch in an easily accessible area near the battery and connect it to the power wire as shown in the diagram to the left. Connect each wire to the switch using crimp on spade connectors or soldering them directly to the switches’ tabs. The gold color tab is the ground (negative ground from battery), the middle silver tab is the power out (power to the lights), and the outer silver tab is the power in (power from the battery).