Owner Manual

E-Mail: [e-mail] Web: pixltile.com
Sizes (shown in Grey) Sizes and Finishes
Wall Tile
Urban Domain
Shown in Green 3 x 12 Gloss
Field Tile
Nominal Size (in) Actual Size (mm) Thickness (mm) Finish
2 x 8 48 x 198 8 Satin/Gloss
4 x 8 98 x 198 8 Satin/Gloss
3 x 12 73 x 298 8 Satin/Gloss
6 x 6 148 x 148 8 Satin/Gloss
3 x 6 73 x 148 8 Satin/Gloss
This product is calibrated P
IXL recommends a minimum 2mm grout joint.
* Field tile sizes are not available in every color or finish. Please refer to Availability Chart on the next page to see
options.
Coordinating Trim
Nominal (in) Actual Size (mm) Thickness (mm) Finish
4 x 8 Single Bullnose
98 x 198
8 Satin/Gloss
3 x 12 Single Bullnose
73 x 298
8 Satin/Gloss
4 x 8 Cove Base
98 x 198
8 Satin/Gloss
6 x 6
4 X 8
2 X 8
3 x 12
3 x 6
Product Performance
Breaking Strength >200 lbf ASTM C648
Chemical Resistance Unaffected ASTM C650
Water Absorption 14.0% – 20.0% ASTM C373
Scratch Hardness 7 Mohs Scale
Urban Domain has a shade variation of V1.
V2 V3 V4V1
V1 Uniform appearance
V2 Slight Variation
V3 Moderate Variation
V4 Substantial Variatio
n
This tile product is produced with a V1 variation. Differences among pieces from the same pro-
duction run are minimal. Inspect the product upon delivery and for best results, blend tile from
several cartons during installation.
3 x 12 Single Bullnose
4 x 8 Single Bullnose
4 x 8 Cove Base**
I
nformation listed here is subject to
change. Please refer to pixltile.co m for
the latest, most accurate information.
* See size chart on next page for
availability by color and finish.
*Trim pieces are not available in every color or finish. Please refer to Availability Chart on the next page to see
options.
Shade & Texture Index
Urban Domain tile is recommended for interior vertical surfaces in residential and
commercial applications.
Recommended Uses