Instructions / Assembly

PK300 ASSEMBLY INSTRUCTIONS (www.pkgrills.com/assemblyvideos)
9
STEP 1b. Attach VENT HANDLES to LOWER RADIAL
VENTS using provided M6 screws. Handles are identical,
so work interchangeably with VENTS.
STEP 1a. Attach SHELF LOCKS to LOWER CAPSULE
oriented as shown using provided M6 screws and lock
washers. NOTE: If provided in box, apply optional thread
lock material to threads prior to fastening. Otherwise,
disregard.
STEP 2. With the UPPER SHELF in the down position, place
the LOWER CAPSULE on the cart with the hinge positioned
over the wheels as shown. Note the four holes in the lip of
the capsule. These holes align with the four top lugs on the
UPPER CART ASSEMBLY to ensure proper orientation of
the capsule.
Pro Tip: Rotate both the lower vents to the fully open
position to get the handles out of the way and then lower
the right side of the capsule onto the cart first, then lower
the left side (hinge side) of the capsule.
ASSEMBLE LOWER CAPSULE
M6 Screw
STEP 3. When the LOWER CAPSULE is in place, rotate the
shelf up into the locked position. This will lock the lower
capsule onto the cart.
For future use, note that by squeezing the two UPPER
SHELF LEVERS inward, you can lower the UPPER SHELF,
which allows easy removal of the LOWER CAPSULE.