User Guide

12
Selecting a Source
Selecting a Source
In this guide, a source is any type of picture. It might be an ana-
log computer image, a video processor, a VCR or DVD, or it
might be a DVI picture from a computer.
Selecting the Source Automatically
1 Press SOURCE on the remote. The c50R/
c67R goes to the next connector that
has a valid picture on it and displays
that picture.
2 If you want to select a different source,
press
SOURCE again to select the next
connector (that has a valid picture on
it) and display the picture.
Note:
If a connector does not have a valid source, the c50R/c67R
briefly displays that it has scanned that connector and then proceeds
to the next connector.
Selecting the Source Manually
1 Press FREQ/PHASE on the remote. The c50R/c67R displays
the
PICTURE menu for the current source.
2With
SOURCE highlighted, press the + button to open the
SOURCE submenu.
Note:
The SOURCE submenu displays to the right of the PICTURE
menu.
3In the SOURCE submenu, use the up/down arrow keys to
select the desired source.
4 When the desired source is selected, press
ENTER. The PIC-
TURE menu changes to display the settings for that
source.
When the Source is Familiar to c50R/c67R
When a “new” source is selected, the c50R/c67R looks through a
list of the last 10 picture types it used. If the “new” source is like
a previous one in this list (resolution, number of active lines,
etc.), the c50R/c67R uses the stored data and does not do any-
thing in the
AUTO SETUP OPTIONS menu. This saves time, and
the picture is displayed faster without going through adjust-
ments, which are visible on the screen.
Best Way to Change a Source
The best way to select a source is to recall a configuration your
installer has created for you. See the Installation & Configuration
Guide CD for more detailed information.
1 On the remote, press
SAVE. The RECALL menu displays.
2 Using the arrow keys, scroll to one of the numbered con-
figurations your installer has created for you.
3 Press
ENTER to show the RECALL SLOT menu.
4With the
RECALL NOW line selected, press ENTER. If the top
of the menu displays “Current,” the source is identical to
the settings stored in the memory slot.
Picture
Source Digital
Colorspace RGB
Vertical Frequency (frame locked) 60Hz
Horizontal Frequency 50.00kHz
Horizontal Resolution 1366
Vertical Resolution 768
Sharpness 4