Systems ICEBrite EL VGA Displays User's Manual

EL640.480-AM Operations Manual (020-0351-00C)
8
AM8 Data and Power Connector
The standard data and power connector for the AM8 displays is a Samtec
ASP-61606-01-M or equivalent, J1 20-pin, 2mm pitch (Figure 2. Connector
Locations). The mating connector is in the Samtec TCSD family of cable strips.
The proper connector, user-specified cable length, and connector
configuration are supplied as a single unit. Consult your Samtec representative
(1 800-SAMTEC9) for the cable/connector options.
Figure 2. AM8 Data/Power Connector
Table 3. J1 Connector Pinouts.
Pin Signal Description Pin Signal Description
1 UD1 Video data (upper) 2 UD0 Video data (upper)
3 UD3 Video data (upper) 4 UD2 Video data (upper)
5 LD1 Video data (lower) 6 LD0 Video data (lower)
7 LD3 Video data (lower) 8 LD2 Video data (lower)
9 CP2 Pixel clock 10 GND Ground
11 CP1 Line pulse 12 GND Ground
13 S Frame pulse 14 GND Ground
15 GND Ground 16 GND Ground
17 V
L
+5 V logic supply 18 V
L
+5 V Logic supply
19 V
H
+12/24 V Display supply 20 V
H
+12/24 V Display supply
J1 Side View
J1 Top View
J2
JP1
J1
Pin 1
Pin 1
Key