Systems Projector User's Manual

DLP
®
Projector – User’s Manual
Installation II Menu
Press the Menu button to open the OSD menu. Press the cursor ◄► button to move to the Installa-
tion II menu. Press the cursor ▲▼ button to move up and down in the Installation II menu. Press
◄► to change values for settings.
Item Description
Auto Source
Press the cursor ◄► button to enable or disable automatic source detection.
(Range: On ~ Off)
Auto Power Off
(min.)
Press the cursor ◄► button to enable or disable automatic shutdown of lamp
when no signal.
Auto Power On
Press the cursor ◄► button to enable or disable automatic power On when
AC power is supplied.
Fan Speed
Press the cursor ◄► button to toggle between Normal and High fan speeds.
Note: We recommend selecting high speed in high temperatures, high humid-
ity, or high
altitude areas.
Lamp Mode
Press the cursor ◄► button to select the lamp mode for higher brightness or
lower brightness to save lamp life.
Advanced
Press
(Enter) / ► to enter the Advanced menu. See Advanced Feature on
page 30.
Factory Reset Press (Enter) / ► to reset all items to factory preset values.
Status
Press
(Enter) / ► to enter the Status menu. See page 34 for more
information on Status.
– 29 –