ADSL 2/2+ VPN Firewall Router User's Manual

ADE-4300/ADW-4300 User Guide

102

Figure 72: Routing Screen

Data - Routing Screen

RIP

RIP Direction

Select the desired RIP Direction.

RIP Version

Choose the RIP Version for the Server.

Static Routing

Table Entries

This list shows all entries in the Routing Table.

· This area shows details of the selected item in the list.

· Change any the properties as required, then click the "Edit"

button to save the changes to the selected entry.

Buttons

Add

Add a new entry to the Static Routing table, using the data

shown in the "Properties" area on screen. The entry selected in

the list is ignored, and has no effect.

Edit

Update the current Static Routing Table entry, using the data

shown in the table area on screen.

Delete

Delete the current Static Routing Table entry.

Save

Save the RIP setting. This has no effect on the Static Routing

Table.

Configuring Other Routers on your LAN

It is essential that all IP packets for devices not on the local LAN be passed to the

ADE-4300/ADW-4300, so that they can be forwarded to the external LAN, WAN, or

Internet. To achieve this, the local LAN must be configured to use the ADE-

4300/ADW-4300 as the Default Route or Default Gateway.

Local Router

The local router is the Router installed on the same LAN segment as the ADE-

4300/ADW-4300. This router requires that the Default Route is the ADE-4300/ADW-