User Manual

18
9.GTP-805ATechnicalSpecications
The GTP-805A comes with the following standard features:
l Standard: IEEE 802.3/802.3u/802.3ab, 10/100/1000BASE-T
and IEEE 802.3at/802.3af Power over Ethernet standard
lConnectors:
 One RJ45 (auto-MDI/MDI-X) twisted-pair, EIA568 with PoE
 One ber-optic connector type (vary with model)
lData Transfer Rate: 10/100/1000Mbps (TP), 1000Mbps
(Fiber)
lDuplex Mode Support: Full- or half-duplex mode by auto-
negotiation (TP)
lLED Indicators: PWR, FX LNK/ACT, TP LNK/ACT, PoE in Use
lPoE Power Output: DC 54V, 30 watts
l Power Pin Assignment: 1/2(+), 3/6(-)/end-span
lPower Supply: DC 54V, 0.74A, external AC-DC adapter
lAmbient Temperature: 0° to 50°C (operating)
lHumidity: 5% to 90% (non-condensing)
lDimensions: 26 x 70 x 94mm (H x W x D)
lCable:
 UTP: Cat 5/5e/6 UTP cable
 Fiber: MM: 50/125 µm or 62.5/125 µm optic ber
 Fiber: SM: 9/125 µm optic ber
For connection to Router, Bridge, Switch or Hub, please refer to
the device’s Technical Manual.