Cut Sheet

Description

4 Inch EYS F/F Sealing Fitting (V/H)

PVC coated Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from

migrating from one part of the conduit system to another, thus limiting the spread of any potential

explosion and enhancing safety. The PVC and urethane coatings of the fittings protects them from

corrosive atmospheres so they can continue to function in hazardous locations.

Application

Stop gasses, vapors or flames from migrating from one part of the conduit system to another,

thus limiting the spread of any potential explosion and enhancing safety

Features

40 mil gray PVC exterior coating

2 mil red urethane interior coating

10 trade sizes from 1/2" through 4"

Sealing sleeves on all conduit openings

General

Material: FERROUS METAL

Exterior Finish: A nominal .040 inch (40 mil) gray PVC coating

Interior Finish: A nominal .002 inch (2 mil) red urethane

Sealing Sleeves: All conduit openings

Sealing Orientation: Vertical or Horizontal

Hub Type: Female

Drain: Continuous, automatic drainage of condensate

Dimensions

Dimension A (Inches) 9.75

Dimension B (Inches) 5.33

Turning Radius 3.69

Nominal Weight (Pounds) 16

Technical / Specification Documents

Specification Guide (1995 Master) AVAILABLE ON WEBSITE

Specification Guide (2004 Master) AVAILABLE ON WEBSITE

Installer Certification and Tools AVAILABLE ON WEBSITE

Chemical Resistance Charts AVAILABLE ON WEBSITE

Performance Specifications AVAILABLE ON WEBSITE

Sealing Fittings

Catalog Number: PREYS10

UPC: 784011206568

To Quickly Create RFQs & Submittals of Plasti-Bond

Products,Visit http://www.plastibond.com/my-catalog

Plasti-Bond RedH OT

PVC Coated Rigid Metal Conduit

1100 US Hwy 271 South, Gilmer, TX 75644

Tel 903.843.5591 | Fax 903.843.5595

customerservice@plastibond.com

PAGE 1
Sealing Fittings Catalog Number: UPC: PREYS10 784011206568 Description 4 Inch EYS F/F Sealing Fitting (V/H) PVC coated Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another, thus limiting the spread of any potential explosion and enhancing safety. The PVC and urethane coatings of the fittings protects them from corrosive atmospheres so they can continue to function in hazardous locations.
PAGE 2
Sealing Fittings Catalog Number: UPC: PREYS10 784011206568 Standards NEC/CEC: Class I, Division 1 & 2, Groups C, D NEC/CEC: Class II, Division 1, Groups F, G NEC/CEC: Class II, Division 2, Groups F, G NEC/CEC: Class III Notes These sealing fittings should be used with a suitable system of sealing compound, such as Chico A, Chico X or Chico A-P from Crouse-Hinds. Follow the installation instructions included with the sealing compound.