Cut Sheet

ManualsBrandsPlasti-Bond ManualsFittings1/2 F/f Sealing Fitting

Description

1/2 Inch EYS F/F Sealing Fitting (V/H)

PVC coated Sealing Fittings are used in conduit runs to stop gasses, vapors or

flames from migrating from one part of the conduit system to another, thus limiting

the spread of any potential explosion and enhancing safety. The PVC and ure-

thane coatings of the fittings protects them from corrosive atmospheres so they

can continue to function in hazardous locations.

Application

Stop gasses, vapors or flames from migrating from one part of the conduit

system to another, thus limiting the spread of any potential explosion and

enhancing safety

Features

40 mil gray PVC exterior coating

2 mil red urethane interior coating

10 trade sizes from 1/2" through 4"

Sealing sleeves on all conduit openings

General

Material:

FERROUS METAL

Exterior Finish:

A nominal .040 inch (40 mil) gray PVC

coating

Interior Finish:

A nominal .002 inch (2 mil) red urethane

Sealing Sleeves:

All conduit openings

Sealing Orientation:

Vertical or Horizontal

Hub Type:

Female

Drain:

Continuous, automatic drainage of

condensate

Dimensions

Dimension A (Inches)

3.69

Dimension B (Inches)

1.33

Turning Radius

1.16

Nominal Weight (Pounds)

1.3

Technical / Specification Documents

Specification Guide (1995 Master)

AVAILABLE ON WEBSITE

Specification Guide (2004 Master)

AVAILABLE ON WEBSITE

Installer Certification and Tools

AVAILABLE ON WEBSITE

Chemical Resistance Charts

AVAILABLE ON WEBSITE

Performance Specifications

AVAILABLE ON WEBSITE

Sealing Fittings

Catalog Number:

PREYS11

UPC:

784011206575

Summary of content (2 pages)

PAGE 1
Sealing Fittings Catalog Number: UPC: PREYS11 784011206575 Description 1/2 Inch EYS F/F Sealing Fitting (V/H) PVC coated Sealing Fittings are used in conduit runs to stop gasses, vapors or flames from migrating from one part of the conduit system to another, thus limiting the spread of any potential explosion and enhancing safety. The PVC and urethane coatings of the fittings protects them from corrosive atmospheres so they can continue to function in hazardous locations.
PAGE 2
Standards NEC/CEC: D Class I, Division 1 & 2, Groups A, B, C, NEC/CEC: Class II, Division 1, Groups E, F, G NEC/CEC: Class II, Division 2, Groups F, G NEC/CEC: Class III Notes These sealing fittings should be used with a suitable system of sealing compound, such as Chico A, Chico X or Chico A-P from Crouse-Hinds. Follow the installation instructions included with the sealing compound.