Datasheet

The PMC8-2 SUB is a larger subwoofer for full-
bandwidth, high-resolution reference monitoring
in the most demanding professional environments.
A true low-frequency monitor like the PMC8 SUB,
and offering the same DSP engine and seamless
integration with surround and immersive systems,
the PMC8-2 SUB betters the spec of its smaller sibling,
offering higher maximum SPL output all the way
down to 25Hz.
With the same dimensions as the PMC8-2 mideld
monitor, the PMC8-2 SUB’s twin eight-inch bass
drivers are powered by independent 400W Class-D
ampliers. The same conguration options are
available as on the PMC8 SUB, likewise accessible
on the speaker’s rear panel or by using the browser-
based SoundAlign software via a LAN-connected
tablet, smartphone or computer.
The PMC8-2 SUB can be used as a standalone
subwoofer for multichannel and immersive sound
systems, or as an XBD cabinet with either PMC6-2
or PMC8-2 monitors, creating a system of awesome
power and dynamic range. The sub is available in
either left- or right-handed cabinet versions (PMC8-2
SUB-L or PMC8-2 SUB-R), to allow placement of the
bass drivers on the outside edges of a stereo array,
matching the arrangement of the main monitors.
• Active sub with twin 8-inch bass drivers & ATL
™
bass loading
• Frequency response: 25Hz - 500Hz
(- 3dB) (@1m full space, on-axis)
• Max. cont. SPL: 115dB @1m
(Quarter space value calculated as +3dB from half space
measurement. Unweighted input,20-20kHz Pink Noise (IEC)
with 12dB CF for 2 hours AES2-1984 duration)
• State-of-the-art Class-D amplier: LF 2 x 400W
• Analogue/AES3 digital input
(16/24-bit, 18 -192kHz sample rate)
• Digital ‘through’ output (AES3 24-bit 96kHz)
• SoundAlign network control interface for single or group EQ
& settings
• Sophisticated DSP driver protection, EQ, and delay/phase
options
• Dedicated XBD conguration mode
PMC8-2 SUB
(left)
PMC8-2 SUB
(right)