INSTRUCTIONS (105085) FOR HDM 1400 AND HDM 1400 TA, TRAILERS HDM 1400 MODEL 10738 HDM 1400 TA MODEL 10812 Please contact customer service directly at the E-mail or phone number listed below for any quality issues. ONCE USED THIS PRODUCT CANNOT BE RETURNED TO STORE. ** Warranty cannot be honored without an original, dated receipt ** ** REGISTER YOUR PURCHASE ONLINE AT CLAMOUTDOORS.
HDM 1400 SPE C IF IC AT IO NS : Part Number Load Capacity: Level Load Size: Overall Dimensions: Weight: Tire Size: 110738 1400 lbs 23 Cubic Feet 92”x 51”x 35 172 lbs. 18”x 9.50-8” MODEL 10738 WARRANTY INFORMATION IMPORTANT-PLEASE READ: CLAM OUTDOORS INC. warrants to the original retail purchaser its product be free from manufacturers defects for (3) years from the date of the original purchase. Clam Outdoors Inc will replace or repair any part found defective within the (3) year time limit.
WARNING: ▪ ▪ ▪ ▪ THIS ATTACHMENT IS INTENDED FOR USE IN LAWN CARE AND HOME APPLICATIONS. DO NOT TOW BEHIND A VEHICLE ON A HIGHWAY OR IN ANY HIGH SPEED APPLICATION. THIS PRODUCT HAS BEEN DESIGNED FOR OFF-ROAD USE ONLY. MAXIMUM TOW SPEED IS 10 MPH. THE FOLLOWING STATEMENTS ARE SUGGESTIONS AND DO NOT SUPERCEDE OR ELIMINATE ANY TOWING AND SAFETY INSTRUCTIONS LISTED IN ANY OWNERS MANUALS FOR ANY PRODUCT BEING USED FOR THE PURPOSE OF TOWING ANY CLAM OUTDOORS INC. PRODUCTS.
PARTS LIST (HDM 1400) QTY. 1 1 2 2 1 1 1 1 2 1 1 1 5 5 5 5 15 8 9 3 3 3 2 1 1 3 PART NO. 110738 105064 105074 105012 105079 101721 105082 105073 105071 105068 105085 105083 101732 102347 101741 101740 101081 105325 101163 101739 101312 101313 101823 102200 102201 101906 DESCRIPTION ASSY, HDM 1400 TRAILER ASSY, WLDMT, TRAILER BED PLATE, AXLE SUPPORT ASSY, 18 X 9.5.
FASTENERS
STEP-1 1. LOOSELY INSTALL ONE BRACKET (105074) TO TRAILER BOX AS SHOWN. STEP-2 1. SLIDE AXLE (105079) THRU PREVIOUSLY INSTALLED BRACKET (105074) 2.
STEP-3 1. ATTACH TONGUE CONNECTOR (101721) AS SHOWN. 2. DO NOT OVER TIGHTEN (101721) SHOULD ROTATE FREELY. STEP-4 1. ATTACH AXLE (105079) TO BOTH BRACKETS (105074) WITH FASTENERS AS SHOWN AND SECURELY TIGHTEN ALL FASTENERS INSTALLED AT THIS POINT.
STEP-5 1. ATTACH TONGUE (105080) AS SHOWN 2. DO NOT OVER TIGHTEN (105080) SHOULD ROTATE FREELY. STEP-6 1.
STEP-7 1. ATTACH WHEELS AS SHOWN LYNCH PIN (101823) MUST BE LOCKED IN POSITION AS SHOWN BEFORE MOVING TRAILER STEP-8 1.
TRAILER BOX DUMP AND TILT 1.
HDM 1400 TA SPE C IF IC AT IO NS : Part Number Load Capacity: Level Load Size: Overall Dimensions: Weight: Tire Size: 110812 1400 lbs 23 Cubic Feet 92”x 51”x 35 245 lbs. 18”x 9.50-8” MODEL 10812 WARRANTY INFORMATION Please contact customer service directly at the E-mail or phone number listed below for any quality issues. ONCE USED THIS PRODUCT CANNOT BE RETURNED TO STORE. ** Warranty cannot be honored without an original, dated receipt ** ** REGISTER YOUR PURCHASE ONLINE AT CLAMOUTDOORS.
WARNING: ▪ ▪ ▪ ▪ THIS ATTACHMENT IS INTENDED FOR USE IN LAWN CARE AND HOME APPLICATIONS. DO NOT TOW BEHIND A VEHICLE ON A HIGHWAY OR IN ANY HIGH SPEED APPLICATION. THIS PRODUCT HAS BEEN DESIGNED FOR OFF-ROAD USE ONLY. MAXIMUM TOW SPEED IS 10 MPH. THE FOLLOWING STATEMENTS ARE SUGGESTIONS AND DO NOT SUPERCEDE OR ELIMINATE ANY TOWING AND SAFETY INSTRUCTIONS LISTED IN ANY OWNERS MANUALS FOR ANY PRODUCT BEING USED FOR THE PURPOSE OF TOWING ANY CLAM OUTDOORS INC. PRODUCTS.
PARTS LIST (HDM 1400 TA) QTY. PART NO. DESCRIPTION (BOX 1) 1 1 2 2 1 1 1 1 2 1 1 1 5 5 5 5 15 8 9 3 3 3 2 1 1 3 110738 105064 105074 105012 105079 101721 105082 105073 105071 105068 105334 105083 101732 102347 101741 101740 101081 105325 101163 101739 101312 101313 101823 102200 102201 101906 ASSY, HDM 1400 TRAILER ASSY, WLDMT, TRAILER BED PLATE, AXLE SUPPORT ASSY, 18 X 9.5.
FASTENERS
STEP-1 1. LOOSELY INSTALL ONE BRACKET (105074) TO TRAILER BOX AS SHOWN. STEP-2 1. SLIDE AXLE (105079) THRU PREVIOUSLY INSTALLED BRACKET (105074) 2.
STEP-3 1. ATTACH TONGUE CONNECTOR (101721) AS SHOWN. 2. DO NOT OVER TIGHTEN (101721) SHOULD ROTATE FREELY. STEP-4 1. ATTACH AXLE (105079) TO BOTH BRACKETS (105074) WITH FASTENERS AS SHOWN AND SECURELY TIGHTEN ALL FASTENERS INSTALLED AT THIS POINT.
STEP-5 1. ATTACH TONGUE (105080) AS SHOWN 2. DO NOT OVER TIGHTEN (105080) SHOULD ROTATE FREELY. STEP-6 1.
STEP-7 1. ATTACH TANDEM ARMS AS SHOWN LYNCH PIN (101823) MUST BE LOCKED IN POSITION AS SHOWN BEFORE MOVING TRAILER STEP-8 1. ATTACH WHEELS AS SHOWN.
STEP-9 1. SLIDE TAILGATE BETWEEN BRACKETS HOLES CAN BE USED TO LOCK OR SECURE TAILGATE IN POSITION TRAILER BOX DUMP AND TILT 1.
VISIT OUR WEB-SITE FOR ADDITIONAL ACCESSORIES THAT MAY BE AVAILABLE FOR YOUR TRAILER TOOL RACK PART# 110517 TOOL ORGANIZER PART# 110518
