User manual

Pairing Polar G5 with Training Computer
G5 must be paired with your training computer
in order to receive speed, distance and location
data. For further information on pairing, see the
user manual of the training computer in
question. Please note that pairing may be
referred to as teaching in the user manual.
Wearing the Armband
Please follow the pictures on the back cover.
1. Encase the G5 into the armband pocket,
the USB port against the bottom of the
pocket. Check that the LEDs and the power
key are visible through the window.
2. Pull the pocket's upper edge over the G5
(picture 3). G5 is securely positioned when
the pocket's upper edge covers the top of it
(picture 4).
3. Place the G5 and the training computer on
the same arm. Position the armband around
your upper arm or forearm and fasten
(pictures 5 and 6). Make sure that the
"POLAR" logo on the armband is in an
upright position.
Wearing the GPS Clip
Please follow the pictures on the back cover.
1. Position the G5 with “POLAR” logo upright
above the clip and snap it in place (1).
2. Attach the clip to your clothing on the same
side of your body as the arm in which you
ENGLISH 5