Operation Manual

45
Polaroid Q10 / Q20
Continuous Shot
Use this setting to perform continuous shooting. After
entering this mode, you can shoot multiple images by
pressing and holding down the shutter button.
There are five available options:
•
Off: Turn off the Continuous Shot function.
• Unlimited: Press and hold the shutter button to
shoot continuously until you release the shutter
button, or run out of space on the memory card.
•
3 shot: Capture up to 3 consecutive pictures.
•
3 shots (Last): Capture pictures continuously until
the Shutter button is released. Only the last 3
shots will be recorded.
•
Time-Lapse: Automatically capture pictures in a
predefined interval.
The flash is dissabled in this mode in order to
enable quick succession of shots.
Smile Detection
With the camera's new "Smile Detection" feature,
which automatically detects and captures a person
smiling, you'll never miss a smile.
1. When smile detection is enabled, the ( ) icon will
display on the LCD screen.
2. Point the camera towards the subject, when the
camera identifies a human face, a white focusing
frame will appear around the face on the screen.
Press the shutter button completely, then release.
The camera will “wait for” a smiling face.
3. When the subject smiles, the camera will automatically
release the shutter and capture the photo.
4. If you want to stop smile shooting function, please
press Shutter button.
A face must be detected by the camera in order
for smile detection to function correctly.
For optimal detection results, the subject should
be framed to occupy most of the screen space.