User's Manual

Customer Service Hours of Operation: Monday-Friday, 9
am
-5:30
pm
est
[e-mail] 3
Sound Bar & Remote Buttons
Power On/Off
Optical Source 1 Mode
(on Remote)
Source Select
(on Sound Bar)
Aux Source 2 Mode
(on Remote)
Increase/Decrease
Volume
Bluetooth Source Mode
(on Remote)
Mutes and unmutes
the sound
Increase/Decrease Bass
(on Remote for optional sub)
LED Guide
There are four LEDs on the front of the bar.
Power
On—Active source (in white) displayed for 3 seconds then
fades out until another button is pressed (volume, source, etc.).
Sleep/Standby—LED 1 pulses
Source Select
Source 1 Optical—LED 1 ashes green while recognizing
the Dolby signal, then shines green in Dolby Digital; in PCM
LED 1 shines white.
Source 2 Analog—LEDs 1 and 2 shine white
Souce 3 Bluetooth—LEDs 1, 2 and 3 shine white when
connected; LEDs 1, 2 and 3 pulse when in discovery mode.
Volume
Vol Up—Each LED reects 7 steps of volume increase.
When max volume is reached (28 steps) all four LEDs
ash twice then turn off.
Vol Down—Each LED reects 7 steps of volume decrease.
When Mute is reached (28 steps) LED 1 ashes 1x/sec
until taken out of Mute.
Mute-LED 1 ashes 1x/sec until unmuted.
Learn
Enter Learn Mode—LEDs 1 thru 4 cycle on/off repeatedly until
a button to be learned is pressed or it times out.
Button Selected on bar—LEDs 1 thru 4 shine white
Pressing the remote button to be learned—LEDs 1 thru 4
ash white with every press until command learning is
successful or fails.
Command learned—LED 1 ashes green 3x
Command fail—LEDs 1 and 3 ash together, then LEDs 2 and 4;
repeats 3x (after unsuccessful learn, bar will exit Learn mode;
display returns to source).
Command erased—LED 1 blinks green, then white 3x.
Wall Mounting Your Sound Bar
If you choose to wall mount your Sound Bar, ensure that
your wall anchors secure properly into the wall and that
they can bear the weight of the Sound Bar.
Overall Dimensions
1. 3 7/16” H (8.73 cm)
2. 31” (78.74 cm)
Keyhole Slots
3. 19 13/16” W (50.32 cm)
Top of Bar to Keyhole Slots
4. 1 5/16” (3.33 cm)
Adjust Bass Volume on Bar
Press and hold MUTE, then press Volume Up or Volume Down.
LED 1 ashes green when button pressed; ashes 2 X at minimum
volume; LEDs 1-4 all ash white 2X at maximum volume.
FR1 WIRELESS DONGLE Port for
Optional FR1 WIRELESS SUBWOOFER
To enjoy greater bass performance, add an optional FR1 WIRELESS
SUBWOOFER. Your Dish TV representative can help you place and
set up the subwoofer (FR1 WIRELESS DONGLE comes with subwoofer).
Want more bass?
Upgrade your bar with a Polk Subwoofer.
Contact Dish: 888-333-DISH
www.dish.com/smarthomeservices
Connecting your Sound Bar to your TV
Source 1: Digital Optical Hookup
Source 2: Analog Hookup
2
1
2
3
4
ANALOG
AUDIO OUTPUT
L
R
TV
DIGITAL OPTICAL
AUDIO OUTPUT
ANALOG
AUDIO OUTPUT
L
R
TV
DIGITAL OPTICAL
AUDIO OUTPUT