surroundbar 9000 instant ® home theater ENGLISH FRANÇAIS ESPAÑOL
ENGLISH IMPORTANT SAFETY INSTRUCTIONS e. If the product has been dropped or the cabinet has been damaged. This product was designed and manufactured to meet strict quality and safety standards. There are, however, some installation and operation precautions which you should be particularly aware of. f. When the product exhibits a distinct change in performance this indicates a need for service. 1. Read Instructions. All the safety and operating instructions should be read before the system is operated.
PLEASE TAKE INVENTORY Please check to ensure you have everything in your Polk® SurroundBar® 9000 Instant Home Theater® (IHT) carton. Inside, you should find: SurroundBar Subwoofer Remote Control (Battery Included) Subwoofer Power Cord 24V Power Supply 6' Digital (Optical) Cable 1/8" to 1/8" analog cable 1/8" to RCA adapter Quick Start Guide Owner’s Manual Online Registration Card Thunderous bass anywhere in the room thanks to a high efficiency wireless subwoofer, which can be placed up to 50' away.
SOURCE LED GUIDE 1 2 3 4 5 SOURCE 1 SOURCE 2 FRONT SOURCE 3 SOURCE 4 BACK BAR CONTROLS FRONT PANEL: 132W 1. Learn—Puts the bar into “learning mode” so you can program it to respond to commands from your existing remote control. 6 7 8 9 Green Two Blinks—A remote control or keypad operation signal is received successfully. 2. Source—Changes which input source you are listening to. Green Slow Blinking—System is muted.
1 2 REMOTE CONTROL 1. Power ( )—Turns on the bar or puts it in standby mode. 3 4 2. Mute—Mutes and unmutes the sound coming from the SurroundBar 9000 IHT. 5 3. Source 1, 2, 3 or 4—Changes which input source you are listening to. 4. Volume Up and Down ( + / – )—Adjusts the master volume of the SurroundBar 9000 IHT system. 5. SUB Volume Up and Down ( + / – ) Adjusts the volume of the subwoofer. 1 2 SUBWOOFER CONTROLS 1.
LEARN SOURCE MUTE LEARN SOURCE MUTE Wall mounted bar Shelf mounted bar sits in front of TV 2 WHERE TO LOCATE YOUR BAR FOR THE BEST SOUND It’s easy. The bar comes with rubber feet already attached, so it will sit securely on any flat surface. Just center the bar under your TV screen. If your TV is housed in a media center, you can place the bar above the TV. 4 1 3 Overall Dimensions 1. 3 3/4" H (9.53 cm) If your TV is wall mounted, the bar can mount right beneath it.
HOW TO CONNECT YOUR BAR HOW TO CONNECT YOUR SUBWOOFER This is really easy too. You likely have many sources for your audio signal: your TV, your DVD player, or a cable/satellite box. The bar is able to accept audio from up to four different sources. The simplest approach is to connect the optical audio output of your TV to the optical input on the back of the bar. This method will provide the highest quality audio regardless of whether you are watching TV or watching your favorite DVD.
HOW TO OPTIMIZE THE SOUND WHEN TV SPEAKERS ARE ON You should hear sound from the bar. If you don’t, turn up the volume on the bar using its volume control buttons. If your bar is connected to your TV, there’s a very good chance your TV speakers are also playing. It’s impossible to give specific instructions on how to turn off the speakers for every TV, but here’s a way to do it that covers many of the TVs out there. 1. On your TV remote control, find a “menu” or “setup” button.
HOW TO SET UP A REMOTE CONTROL FOR YOUR SURROUNDBAR IHT 5 SMARTBAR™ PROGRAMMING NOTE: For your SurroundBar to respond to your remote control, you MUST FIRST program the bar to respond to your television’s original IR (Infra-Red) remote. An RF (Radio Frequency) remote will not work. Other remotes (cable, satellite) will work only after you have programmed the bar to respond to the TV’s IR remote.
TROUBLESHOOTING The bar does not power on. Ensure you have plugged the power supply into a live wall outlet. Ensure that all components of the power supply are connected properly. Ensure the power supply is properly connected to the bar power input. Ensure the rear panel power switch is in the “ON” position. Bass output is not loud enough. Turn up the subwoofer’s volume using the remote control. Place the subwoofer closer to a corner of the room. Move subwoofer closer to viewing location within the room.
FAQ’S (FREQUENTLY ASKED QUESTIONS) My SurroundBar 9000 was responding to commands, but now it isn’t. What should I do? My TV does not have an optical output. How do I connect my audio? You have several options for connecting your audio: Use the optical output of your source unit (cable/satellite box, DVD player, etc.) and connect directly to the SurroundBar 9000 using the supplied optical cable. Use the 1/8" (3.
A Note Regarding Wireless Performance: Like all wireless devices, your SurroundBar 9000 IHT may be susceptible to RF interference from such sources as microwave ovens, WiFi computer systems, video game systems, cordless telephones, blue tooth systems, baby monitors and other devices. In particular, any devices operating in the 2.4GHz band may cause intermittent wireless connections between the SurroundBar 9000 speaker and the subwoofer.
LIMITED WARRANTY GARANTIE LIMITÉE Polk Audio, Inc., warrants to the original retail purchaser only. This warranty will terminate automatically prior to its stated expiration if the original retail purchaser sells or transfers the Product to any other party. Polk Audio, Inc.
5601 Metro Drive Baltimore, MD 21215 HBP2503B