Eco no-Mizer Planter Box For Fastener Pack (FP-EMP-CU-01) Congratulations ! You have just purchased the finest recycled plastic planter box available.
Before assembly, please make sure all fasteners are included.
ARRANT Step #1: Place the (2) two Frame Rings on edge with the long edge on a flat surface as shown in the diagram above. One at a time, place (4) four Side Boards in position making sure the holes line up with the per-drilled pilot holes in the Frame Rings. Fasten using (1) one Flat Head Phillips Screw per hole.
Step #4: One at a time, place (5) five Side Boards in position making sure the holes line up with the per-drilled pilot holes in the Frame Rings. Fasten using (1) one Flat Head Phillips Screw per hole.
On the open side of the Planter Box, insert the "PB P-EMP-F-01" into the planter box as shown, making sure it is rotated the correct way.
Step #6: One at a time, place (4) four Side Boards in position making sure the holes line up with the per-drilled pilot holes in the Frame Rings. Fasten using (1) one Flat Head Phillips Screw per hole.
Flip it to the up right position and your planter box is now complete.