Business Media Phone User Guide

User Guide for the Polycom VVX 1500 Business Media Phone Displaying Screen Savers
134 Polycom, Inc.
3 Tap > Settings > Basic > Preferences > Picture Frame.
4 From the Picture Frame screen, specify the folder in which you stored
your images on the USB flash drive, and the length of time you want each
image to display:
— In the Folder field, enter the name of the folder in which you placed
your images on the USB flash drive.
If you didn’t place the pictures in a folder (that is, you placed your
pictures in the root directory), don’t enter a folder name.
— Tap the Time Per Image field, and then enter the number of seconds
you want each picture to display.
You can enter a minimum of 3 seconds and a maximum of 300
seconds. The default is 5 seconds.
5 Tap the Save soft key.
If the message “No pictures found” displays after you tap the Save
soft key, there are no pictures in the folder you specified, or in the root
directory (if you did not enter a folder name). Go back and make sure the
information you entered is correct.
6 Tap to return to the idle screen.
7 From the idle screen, tap > Settings > Basic > Preferences >
Screen Saver.
8 From the Screen Saver screen, do the following:
— Tap the Screen Saver field’s highlighted box. From the drop-down
list, tap Enabled to enable a screen saver.
— Tap the Wait Time field, and then enter the number of minutes the
phone should wait after no activity before displaying the screen saver.
You can enter a minimum of 1 minute and a maximum of 9999
minutes. The default is 15 minutes.
9 Tap the Save soft key.
10 Tap to return to the idle screen.
After the number of minutes you specified in the Wait Time field, your phone
will display the screen saver.
You can stop the screen saver at any time by tapping the touch screen (but the
screen saver will re-start if your phone is idle again).