Business Media Phone User Guide

Changing Power Saving Settings Customizing the Phone Display
Polycom, Inc. 151
Changing User Detection Settings
You can specify how sensitive the camera should be at detecting motion. If the
camera detects motion (for example, if you’re near the phone), your phone will
not initiate power-saving mode, even if an idle timeout has been reached.
If the camera detects motion, power-saving mode will terminate and the idle
screen will display. If the camera sensitivity is high (five or higher), the phone
will display the idle screen when you’re near the phone. If the camera
sensitivity is low (between one and four), you will have to wave your hand at
the camera for the idle screen to display. By default, camera sensitivity is set
higher during office hours. If you want, you can disable the user detection
feature altogether.
To change user detection settings:
1 Tap > Settings > Basic > Power Saving > User Detection.
2 From the User Detection screen, do the following:
— For the Office Hours Sensitivity field, enter how sensitive you want
the camera to be while you’re in your office.
You can enter a number between 0 (no sensitivity) and 10 (high
sensitivity). The default sensitivity is 7.
If you set a sensitivity between 1 and 4, you will have to wave your
hand at the camera to exit power-saving mode. As well,
power-saving mode may be initiated when you’re in your office, but
not close to your phone. (If you enter 0, the user detection feature is
disabled and you will have to press a key on your phone to exit
power-saving mode.)
— Tap Off Hours Sensitivity, and then enter how sensitive you want the
camera to be while you’re not in the office.
You can enter a number between 0 (no sensitivity) and 10 (high
sensitivity). The default sensitivity is 2.
If you set a sensitivity between 1 and 4, you will have to wave your
hand at the camera to exit power-saving mode. As well,
power-saving mode may be initiated when you’re in your office, but
not close to your phone. (If you enter 0, the user detection feature is
disabled and you will have to press a key on your phone to exit
power-saving mode.)
3 Tap the Save soft key.
Note
The camera will detect any source of motion in front of it, not just a person or people
nearby. For example, the camera will detect flying objects or rapidly-changing light
conditions. Therefore, even if you’re away from the phone, your phone may detect
other sources of motion, and won’t initiate power-saving mode.
In addition, since your phone’s camera detects motion, if you close the camera
shutter, point the camera at the ceiling, or set the camera sensitivity to 0, the phone
will not detect your presence (even if you’re nearby).