Business Media Phone User Guide

Registering the Phone Getting Started with Your Phone
Polycom, Inc. 21
To clean the touch screen:
1 Tap > Settings > Basic > Screen Clean.
The touch screen is disabled. The message “Touch screen is disabled. Press
any key to exit” displays.
2 Wipe the glass with a clean, lint-free cloth.
3 To enable the touch screen again, press any key on the phone console.
Registering the Phone
Generally, your phone will be deployed with multiple other phones. In this
case, your system administrator will configure the phone parameters
beforehand, so that after you set up your phone, the phone will be registered
and ready to use.
If your phone is not part of a large phone deployment, your phone may not be
registered after you set it up. Before you use your phone, you or your system
administrator will have to register it.
For detailed information on how to register your phone after you install it, see
Quick Tip 44011, Registering Standalone Polycom SoundPoint IP/SoundStation IP
and Polycom VVX 1500 Phones, available at
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical
_Bulletins_pub.html