Video Conference Bridge Hardware & Installation Guide

Chapter 2 - Hardware Installation
2-16
MPI-4/8 Hardware Installation for the MGC-100
The MPI-4/8 (Multi Protocol Interface) Network Interface card is inserted
into the MGC-100 unit.
The MPI box may be mounted on top of the MGC-100 using mounting
brackets, or on a separate 19” or 23” rack, as can be seen in Figure 2-8. When
installed on a 19” rack, the MPI box can be mounted directly on the rack.
When installed on a 23” rack, a mounting plate must be used. If the MGC-100
is rack mounted, there must be at least 6” free space above the MGC-100 to
be able to install the MPI Box on top of the MGC unit.
Figure 2-10: MPI Box rack mounting options
MPI Box
in 19" Rack
Mounting
Plate
Power
L1
L2
Critical
Major
Minor
L0
CONT
MGC-50
ACCORD
PWR
OUT
Stby
Fail
Active
Line 6
Line 7
Line 8
Line 3
Line 4
Line 5
Line 1
Line 2
StbyStby
FailFail
ActiveActive
StbyStbyStby
FailFailFa il
ActiveActiveActive
Stby
Fail
Active
Stby
Fail
Active
VIDEOVIDEO VIDEOVIDEOAUDIOAUDIO
MG-323PR I-8