Integrators' Reference Manual for For ViewStation EX, ViewStation FX, and VS4000

Integrators’ Reference Manual for ViewStation EX, ViewStation FX, and VS4000
108 www.polycom.com
4. In the Com1 Properties window, under Port Settings, select the
following settings:
• Baud rate should match that of the system (default is 9600)
• Data bits = 8
• Parity = none
• Stop bits = 1
• Flow control setting should match that of the system. None
is the default. Some third-party control panels may require
to be set to Hardware.
5. Click OK.