Owner's Manual

Windshield Wipers
You control the windshield wipers by
moving the stalk up or down.
For a Single Wiper Cycle:
Push the stalk down to MIST, then
release it. For more cycles, hold the
stalk down longer.
For Steady Wiper Cycles:
Move the stalk up to either LO or HI,
depending on the wiper speed you want.
To Turn Wipers Off:
Move the stalk to OFF.
CAUTlQN
A
Damaged wiper blades may
prevent you from seeing well
enough to drive safely.
To avoid
damage, be sure to clear ice and
snow from the wiper blades before
using them.
If they're frozen to the
windshield, carefully loosen or
thaw them.
If your blades do
become damaged, get new blades
or blade inserts.
Heavy snow or ice can overload your
wipers.
A circuit breaker will stop them
until the motor cools. Clear away snow
or ice to prevent an overload.
79