Owner manual

ManualsBrandsPOPCORN HOUR ManualsPlayersS-210

Hardware Components/Extension

Internal USB drive port•

External USB drive port•

Power Indicator LED•

IR jack•

RS232 port•

Audio jack•

Video Graphics Array port (VGA)•

Reset button•

High-DenitionMultimediaInterface(HDMI)•

Ethernet port•

Power input•

OpentheDigitalSignagetoppaneltoconrmthattheinternalUSBthumbdriveis•

securely attached.

Attached the IR cable to IR jack.•

Power on the Digital Signage.•

Demoplayback.•

MediaSource•

Shows the Digital Signage Flash Drive (the internal USB drive)◊

Web Services•

Setup Page•

Home -ReturntotheHomepageorMediaSourcepage.◊

Preferences-SettingforLanguage,VideoZoomandRCKeyRepeat.◊

Audio/Video-SettingVideoOutputresolution,HDMIAudioandSurroundMode.◊

Network-DisplayMACAddressandIPAddress.◊

NetworkShare-Browseandaddnetworkshares(smb/nfs)◊

Maintenance-DisplayFirmwareVersioninformation.◊

“Store Front” Digital Signage Quick Start Guide

Set up Digital Signage

TV Interface

Media Source Start Signage

Figure 1.0 “Store Front” Digital Signage Main screen.

Summary of content (5 pages)

PAGE 1
R “Store Front” Digital Signage Quick Start Guide Hardware Components/Extension • Internal USB drive port • External USB drive port • Power Indicator LED • IR jack • RS232 port • Audio jack • Video Graphics Array port (VGA) • Reset button • High-Definition Multimedia Interface (HDMI) • Ethernet port • Power input Set up Digital Signage • Open the Digital Signage top panel to confirm that the internal USB thumbdrive is securely attached. • Attached the IR cable to IR jack.
PAGE 2
Select TV Mode • Go to Setup, then the Audio/Video section • AUTO • HDMI ◊ 480p 60Hz ◊ 576p 50Hz ◊ 720p 60Hz^ ◊ 720p 50Hz ◊ 1080i 60Hz ◊ 1080i 59Hz ◊ 1080i 50Hz ◊ 1080p 60Hz* ◊ 1080p 50Hz* ◊ 1080p 23.976Hz* ◊ 1080p 24Hz* ◊ 1080p 25Hz* ◊ 1080p 29.97Hz* ◊ 1080p 30Hz* ◊ 1080p 59.9Hz* ◊ 1280x768 60Hz ◊ 1360x768 60Hz ◊ 1366x768 60Hz ◊ 1440x900 60Hz ◊ 1680x1050 60Hz • VGA ◊ 1280x768 60Hz ◊ 1360x768 60Hz ◊ 1366x768 60Hz ◊ 1440x900 60Hz ◊ 1680x1050 60Hz NOTE: ^Default Resolution.
PAGE 3
Project “Store Front” Digital Signage File Help Project Playlist Transfer Create Project Project Name : Content File(s) : Project movie1.mp4 movie2.avi music1.wma music2.mp3 pict1.jpg pict3.jpg + _ New Save Figure 2.0 Project screen. 1. Enter the project name. 2. Press the [+] button to add media files to the Content Files(s) listing. 3. Press the [-] button to remove media files from the Content Files(s) listing. 4. Press the [Save] button to save the current project.
PAGE 4
Transfer ◊ FTP to Digital Signage “Store Front” Digital Signage - [Project.dsg] File Help Project Playlist Transfer Methods FTP to Digital Signage Digital Signage IP Address 192.168.0.100 X Connect Disconnect Copy to USB Storage Export Project to Folder Digital Signage Not Connected. Start Stop Figure 4.0 IP Address screen. 1. Enter the IP Address of the Digital Signage Player. 2. Press the [Connect] button to connect to the Digital Signage Player. 3.
PAGE 5
8. The contents of the USB drive will be copied to the Digital Signage Player’s internal storage. 9. The Digital Signage Player will display a on screen prompt when the content has been copied and the USB drive is safe for removal. 10. The uploaded project will begin playback immediately after removal of external USB drive. ◊ Export Project to Folder “Store Front” Digital Signage - [Project.dsg] ...