Instructions / Assembly

10 PK360 | OWNER’S GUIDE

ASSEMBLY INSTRUCTIONS

STEP

1) Assemble left side handle with hook facing out from Grill Bottom Cast. Repeat

with right handle.

2) Place one Air Intake Cylinder™ (Both Left and Right Intake Cylinder™ are the

same) into left Air Intake Slot on Grill Bottom Cast as shown. Hand tighten

Thumb Screw into hole on Air Intake Cylinder™ to secure in proper position.

Air Intake Cylinder™ should be able to turn 90 degrees when Thumb Screw

is installed properly. Indicator on Air Intake Knob should point up when Air

Intake Cylinder™ holes are in fully open position and point to the right when

Air Intake Cylinder™ holes are in the fully closed position. Repeat with right

Air Intake Cylinder.™

ASSEMBLE COMPONENTS OF BOTTOM CAST AS FOLLOWS:

01.

02.

HOOK