Product Manual

4) Wrap the rope around the drum and start winching (figure 3).

NOTE: Do not leave the winch on the hitch with the engine running; the resting position

will cause the Oil Alert

device to turn the Honda

engine off (see section 3.4).

Use the hitch plate only with Category II ball hitch (1500 kg – 3500

lb) or higher.

Make sure the anchoring vehicle’s hand brake is on and working

properly. Position blocks behind the wheels to prevent roll back.

3.3.3 Using the Receiver Hitch winch anchor for 2’’ receivers (PCA-1262, sold separately)

1) Slide the square tubing into the vehicle’s

receiver and secure it with both the hitch pin

and the ‘’R’’ pin (figure 1, no 1).

2) Adjust the maximum desired lateral

movement by positioning the bolts into the

holes (figure 2, no 1).

3) Attach the winch anchor hooks to the eye

bolts (figure 2, no 2).

4) Wrap the rope around the drum and start

winching. The winch will align itself

automatically with the load.

If you need to pull

downward, you will need to install either a

pulley or a roller to prevent damage to the

winch support plate.

Make sure the anchoring

vehicle’s hand brake is on and working

properly. Position blocks behind the wheels to

prevent roll back.