Use and Care Guide

5
2. Secure the fixture (E) to the top pole (A), securing with the
preassembled set screws. Tighten with 3 mm wrench (FF).
3. Thread the top pole (A) to the middle pole (B), securing with
the preassembled set screws. Tighten with 3 mm wrench
(FF).
4. Remove the preassembled screws from the base (C) with a
1/2 in. wrench (not included).
5. Secure the middle pole (B) to the base (C) with the previously
removed screws. Tighten with a 1/2 in. wrench.
Hardware Used
3 mm Wrench x 1
FF
3
Hardware Used
3 mm Wrench x 1
FF
2
FF
FF
B
A
A
E
5
B
C
4
C