Installation Guide

4
ASSEMBLY INSTRUCTIONS
Outlet
Box
BB
D
B
C
I
1
2. Pass canopy (A) over the screw collar loop (I).
Turn the screw collar loop (I) in or out of the
mounting bracket (B) until 1/2 of the screw collar
loop (I) exterior threads are exposed. After a
desired position is found, lock threaded nipple
(C) in place by tightening the second hex nut (D)
up against the mounting bracket (B). Attach
screw collar ring (H) to screw collar loop (I).
D
B
H
C
I
2
Hardware Used
Short Machine
Screw
x 2
BB
1. Screw threaded nipple (C) into screw collar loop
(I) a minimum of 1/4 in. Lock in place with a
preassembled hex nut (D). Screw second hex
nut (D) to the center of threaded nipple (C).
Orient mounting bracket (B) so the raised center
portion protrudes into the outlet box (not
included). Screw threaded nipple (C) into the
mounting bracket (B) and lock in place with the
third hex nut (D). Connect mounting bracket (B)
to the outlet box with short machine screws (BB).
Lowes.com/portfolio