Installation Guide

5
4
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
Hardware Used
1
2
3
Short mounting screw
Long mounting screw
Long mounting screw
Mounting bracket
x 2
x 2
x 2
x 1
x 3
1. Tighten the long mounting screws (CC) 2 full
turns into the holes in the mounting bracket (DD).
Then fasten mounting bracket (DD) onto the
ceiling outlet box (not included) using short
mounting screws (BB).
3. Attach wire nuts (AA) to wire connections.
Tape wire nuts (AA) and wires together.
Wire nut
B
BB
B
B
CC
CC
B
DD
B
AA
AA
ASSEMBLY INSTRUCTIONS
4
5. Install light bulbs (not included). Use two 60-watt
max. standard-base bulbs or two 13-watt standard-
base CFLs.
5
6
4. Place the xture (A) over the outlet box, allowing
the heads of long mounting screws (CC) to come
out through the large ends of the key holes.
Twist xture (A) until heads of long mounting
screws (CC) slide into narrow end of key holes.
Tighten long mounting screws (CC) to secure
xture (A).
6. Raise glass shade (B) up to xture (A) and twist
it clockwise to secure.
2.
Strip 3/4 in. of insulation from wire ends.
Twist stripped ends together with pliers (not
included), black to black (power) and white to
white (neutral). Attach copper wire to ground
wire. Helpful hint: If necessary, attach copper
ground wire to grounded outlet box.
DD
BB
CC
Lowes.com/portfolioLowes.com/portfolio
CC
A
or
B
A