Network Router User Manual

Getting started

Connect this Ethernet cable to the LAN1 port

Connect the other side of this Ethernet cable to your computer

• light will turn on

Note

Depending on your modem settings, you might have the following

screen displayed.

Fill in the fields using the information provided by your Internet

Service Provider (ISP)

Then click on Continue

• A progress bar screen will be displayed, your settings will be saved and

you will be connected to Internet

• Once the installation completed, the following screen will be displayed

Note

This screen is the Philips support site. It is a live Internet page, subject

to change. The screen displayed may differ from the one shown.

Click on Menu if you want to go back to the menu screen

Tip

Your WiFi network is running but not secured.

Click on Menu if you want to go back to the menu screen

Click on Set Encryption

• Your WiFi network will be secured by generating automatically an

encryption key and a network name (SSID)

Note

At any time you can retrieve your wireless security settings using your

installation CD ROM on the computer where you installed your

gateway and by clicking on the security icon of the menu page.

3.3 Connection overview

Your connection before the installation of the router :

Your connection after the installation of the router :

Modem

Internet

Ethernet

Modem

Internet

PCRouter

Wi-Fi

Ethernet